Link to Us     

Security System Standards and Pedestrian / Walkway Safety Standards


ASTM's security system standards are instrumental in the classification, selection, and evaluation of products that have to do with security and protection. These products include combination locks, padlocks, security seals, generic and mercantile vaults. ASTM pedestrian / walkway safety standards cover footwear materials and products, and walkways and walking surfaces. These standards guide manufacturers of such products in the proper fabrication and assessment procedures for the assurance of their quality.


List of security system standards and pedestrian / walkway safety standards developed by ASTM:


Jump to:
CBRNE Sensors and Detectors
DesignationTitle
E2411 - 07 Standard Specification for Chemical Warfare Vapor Detector (CWVD)
E2458 - 10 Standard Practices for Bulk Sample Collection and Swab Sample Collection of Visible Powders Suspected of Being Biological Agents from Nonporous Surfaces
E2520 - 07 Standard Practice for Verifying Minimum Acceptable Performance of Trace Explosive Detectors
E2770 - 10 Standard Guide for Operational Guidelines for Initial Response to a Suspected Biothreat Agent
E2800 - 11 Standard Practice for Characterization of Bacillus Spore Suspensions for Reference Materials
E2805 - 11 Standard Practice for Measurement of the Biological Activity of Ricin
Controlled Access Security, Search, and Screening Equipment
DesignationTitle
F792 - 08 Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems
F1448 - 93a(2006) Standard Guide for Selection of Security Technology for Protection Against Counterfeiting, Alteration, Diversion, Duplication, Simulation, and Substitution (CADDSS) of Products or Documents
F1468 - 04a(2010) Standard Practice for Evaluation of Metallic Weapons Detectors for Controlled Access Search and Screening
F2401 - 04(2010) Standard Practice for Security Checkpoint Metal Detector Screening of Persons with Medical Devices
Decontamination
DesignationTitle
E2414 - 05 Standard Test Method for Quantitative Sporicidal Three-Step Method (TSM) to Determine Sporicidal Efficacy of Liquids, Liquid Sprays, and Vapor or Gases on Contaminated Carrier Surfaces
E2542 - 08 Standard Specification for Portable Water Heaters Used at Personnel Decontamination Stations
E2543 - 08 Standard Specification for Portable Air Heaters Used at Personnel Decontamination Stations and Shelters
E2731 - 09 Standard Specification for Materials to Mitigate the Spread of Radioactive Contamination after a Radiological Dispersion Event
E2739 - 10 Standard Specification for Personnel Decontamination System to be Used During a Chemical Event
E2787 - 11 Standard Test Method for Determination of Thiodiglycol in Soil Using Pressurized Fluid Extraction Followed by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
E2838 - 11 Standard Test Method for Determination of Thiodiglycol on Wipes by Solvent Extraction Followed by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
E2866 - 12 Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Soil by Pressurized Fluid Extraction and Analyzed by Liquid
Editorial and Terminology
DesignationTitle
F1646 - 12 Standard Terminology Relating to Safety and Traction for Footwear
Emergency Preparedness, Training, and Procedures
DesignationTitle
E2413 - 04(2009) Standard Guide for Hospital Preparedness and Response
E2541 - 10 Standard Guide for Stakeholder-Focused, Consensus-Based Disaster Restoration Process for Contaminated Assets
E2601 - 08 Standard Practice for Radiological Emergency Response
E2640 - 10 Standard Guide for Resource Management in Emergency Management and Homeland Security
E2668 - 10 Standard Guide for Emergency Operations Center (EOC) Development
E2732 - 11 Standard Practice for Responder Family Support Service
Footwear
DesignationTitle
F2232 - 09 Standard Test Method for Determining the Longitudinal Load Required to Detach High Heels from Footwear
F2412 - 11 Standard Test Methods for Foot Protection
F2413 - 11 Standard Specification for Performance Requirements for Protective (Safety) Toe Cap Footwear
F2892 - 11 Standard Specification for Performance Requirements for Soft Toe Protective Footwear (Non-Safety / Non-Protective Toe)
F2913 - 11 Standard Test Method for Measuring the Coefficient of Friction for Evaluation of Slip Performance of Footwear and Test Surfaces/Flooring Using a Whole Shoe Tester
Locking Devices
DesignationTitle
F571 - 87(2008) Standard Practice for Installation of Exit Devices in Security Areas
F832 - 90(2008) Standard Classification for Security Seals
F883 - 09 Standard Performance Specification for Padlocks
F946 - 85(2010) Standard Guide for Establishing Security Seal Control and Accountability Procedures
F1157 - 04(2010) Standard Practice for Classifying the Relative Performance of the Physical Properties of Security Seals
F1158 - 94(2008) Standard Guide for Inspection and Evaluation of Tampering of Security Seals
F1699 - 96(2008) Standard Classification for Passive Fiber Optic Seals
F2155 - 01(2009) Standard Specification for Performance of Hasps and Other Attachment Devices for Padlocks or Seals
F2348 - 04(2010) Standard Performance Specification for Privacy Padlocks
Operational Equipment
DesignationTitle
E2521 - 07a Standard Terminology for Urban Search and Rescue Robotic Operations
E2566 - 08 Standard Test Method for Determining Visual Acuity and Field of View of On-Board Video Systems for Teleoperation of Robots for Urban Search and Rescue Applications
E2592 - 07 Standard Practice for Evaluating Cache Packaged Weight and Volume of Robots for Urban Search and Rescue
E2639 - 12 Standard Test Method for Blast Resistance of Trash Receptacles
E2740 - 12 Standard Specification for Trash Receptacles Subjected to Blast Resistance Testing
E2801 - 11 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Obstacles: Gaps
E2802 - 11 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Obstacles: Hurdles
E2803 - 11 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Obstacles: Inclined Planes
E2804 - 11 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Obstacles: Stairs/Landings
E2826 - 11 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Terrains: Continuous Pitch/Roll Ramps
E2827 - 11 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Terrains: Crossing Pitch/Roll Ramps
E2828 - 11 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Terrains: Symmetric Stepfields
E2829 - 11 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Maneuvering Tasks: Sustained Speed
E2830 - 11 Standard Test Method for Evaluating the Mobility Capabilities of Emergency Response Robots Using Towing Tasks: Grasped Sleds
E2831 / E2831M - 11 Standard Guide for Deployment of Blast Resistant Trash Receptacles in Crowded Places
E2853 - 12 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Human-System Interaction (HSI): Search Tasks: Random Mazes with Complex Terrain
E2854 - 12 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Radio Communication: Line-of-Sight Range
E2855 - 12 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Radio Communication: Non-Line-of-Sight Range
Systems Products and Services
DesignationTitle
F967 - 03(2011) Standard Practice for Security Engineering Symbols
F1090 - 06 Standard Classification for Bank and Mercantile Vault Construction
F1233 - 08 Standard Test Method for Security Glazing Materials And Systems
F1247 - 89(2011) Standard Specification for Intrusion Resistant Generic Vault Structures
F1642 - 04(2010) Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings
F2247 - 11 Standard Test Method for Metal Doors Used in Blast Resistant Applications (Equivalent Static Load Method)
F2248 - 09 Standard Practice for Specifying an Equivalent 3-Second Duration Design Loading for Blast Resistant Glazing Fabricated with Laminated Glass
F2656 - 07 Standard Test Method for Vehicle Crash Testing of Perimeter Barriers
F2766 - 11 Standard Test Method for Boat Barriers
F2912 - 11 Standard Specification for Glazing and Glazing Systems Subject to Airblast Loadings
Terminology
DesignationTitle
E2771 - 11 Standard Terminology for Homeland Security Applications
Traction
DesignationTitle
F609 - 05 Standard Test Method for Using a Horizontal Pull Slipmeter (HPS)
F2048 - 00(2009) Standard Practice for Reporting Slip Resistance Test Results
F2508 - 11 Standard Practice for Validation and Calibration of Walkway Tribometers Using Reference Surfaces
Walkway Surfaces
DesignationTitle
F695 - 01(2009) Standard Practice for Ranking of Test Data Obtained for Measurement of Slip Resistance of Footwear Sole, Heel, and Related Materials
F1240 - 01(2009) Standard Guide for Ranking Footwear Bottom Materials on Contaminated Walkway Surfaces According to Slip Resistance Test Results
F1637 - 10 Standard Practice for Safe Walking Surfaces
F1694 - 09 Standard Guide for Composing Walkway Surface Investigation, Evaluation and Incident Report Forms for Slips, Stumbles, Trips, and Falls


Other standards developed by ASTM committees:


3D Imaging Standards

Additive Manufacturing Standards

Adhesive Standards

Aerospace Material Standards

Analytical Chemistry Standards

Asset Management Standards

Atmospheric Analysis Standards

Biotechnology Standards

Construction Standards

Business Copy Product Standards

Carbon Standards

Catalyst Standards

Cement Standards and Concrete Standards

Coal Standards and Gas Standards

Composite Standards

Computerized System Standards

Consumer Product Evaluation Standards

Copper Standards

Corrosion Standards and Wear Standards

Durability of Nonmetallic Material Standards

Electrical Insulating Material Standards

Electrical Standards and Magnetic Conductor Standards

Electronics Standards

Environmental Standards

Fastener Standards

Fatigue Standards and Fracture Standards

Fire Standards and Flammability Standards

Forensic Science Standards

Geotechnical Engineering Standards

Glass Standards and Ceramic Standards

Industrial Chemical Standards

Industrial Hygiene Standards and Safety Standards

Laboratory Testing Standards

Leather Standards

Masonry Standards

Medical Device Standards and Implant Standards

Medical Service Standards and Medical Equipment Standards

Metals Standards

Molecular Spectroscopy Standards and Separation Science Standards

Nanotechnology Standards

Nondestructive Testing Standards

Nuclear Technology Standards

Oxygen Enriched Atmospheres Standards

Paint Standards and Related Coating Standards

Paper Standards and Packaging Standards

Petroleum Standards

Pharmaceutical Application Standards

Physical Measurement Standards

Physical Testing Standards and Mechanical Testing Standards

Plastic Pipe Standards

Plastics Standards

Quality Control Standards

Refractory Standards

Resilient Floor Covering Standards

Road Standards and Paving Standards

Rolling Element Bearing Standards

Roofing Standards

Rubber Standards

Search and Rescue Operations Standards

Security System Standards and Pedestrian / Walkway Safety Standards

Sensory Evaluation Standards

Soap Standards and Polish Standards

Sports Standards and Recreation Standards

Steel Standards

Sustainability Standards

Temperature Measurement Standards

Textile Standards

Thermal Analysis Standards

Thermal Insulation Standards

Underground Utility Standards

Unmanned Maritime Vehicle Standards

Waste Management Standards

Water Testing Standards

Wood Standards