Road Standards and Paving Standards

    ASTM's road and paving standards provide the specifications and test methods pertinent to the material, physical, mechanical, performance, and application requirements of road surfaces and pavements. These geotechnical surfaces are laid down on specified areas intended to sustain either or both foot and vehicular traffic. The types of paving covered by these standards are typically made of asphalt, concrete, and bituminous materials. These road and paving standards allow geotechnical engineering firms and construction companies to examine and evaluate paving materials to ensure strength and durability towards safe application and use.

    List of road standards and paving standards developed by ASTM:


    Jump to:

    Aggregate Specifications

    DesignationTitle
    D242 / D242M - 09 Standard Specification for Mineral Filler For Bituminous Paving Mixtures
    D448 - 12 Standard Classification for Sizes of Aggregate for Road and Bridge Construction
    D692 / D692M - 09 Standard Specification for Coarse Aggregate for Bituminous Paving Mixtures
    D1073 - 11 Standard Specification for Fine Aggregate for Bituminous Paving Mixtures
    D1139 / D1139M - 09 Standard Specification for Aggregate for Single or Multiple Bituminous Surface Treatments
    D2940 / D2940M - 09 Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports
    D5106 - 13 Standard Specification for Steel Slag Aggregates for Bituminous Paving Mixtures
    D6155 - 13 Standard Specification for Nontraditional Coarse Aggregates for Bituminous Paving Mixtures

    Aggregate Tests

    DesignationTitle
    D546 - 10 Standard Test Method for Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures
    D2419 - 14 Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate
    D3042 - 09 Standard Test Method for Insoluble Residue in Carbonate Aggregates
    D3319 - 11 Standard Practice for Accelerated Polishing of Aggregates Using the British Wheel
    D3744 / D3744M - 11a Standard Test Method for Aggregate Durability Index
    D4469 - 11 Standard Practice for Calculating Percent Asphalt Absorption by the Aggregate in an Asphalt Pavement Mixture
    D4791 - 10 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
    D4792 / D4792M - 13 Standard Test Method for Potential Expansion of Aggregates from Hydration Reactions
    D5148 - 10 Standard Test Method for Centrifuge Kerosine Equivalent
    D5444 - 08 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate
    D5821 - 13 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
    D6928 - 10 Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
    D7172 - 14 Standard Test Method for Determining the Relative Density (Specific Gravity) and Absorption of Fine Aggregates Using Infrared
    D7370 - 09 Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion
    D7428 - 08e1 Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus

    Analysis of Asphalt Mixtures

    DesignationTitle
    D1461 - 11 Standard Test Method for Moisture or Volatile Distillates in Bituminous Paving Mixtures
    D1856 - 09 Standard Test Method for Recovery of Asphalt From Solution by Abson Method
    D2172 / D2172M - 11 Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures
    D4125 / D4125M - 10 Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method
    D4887 / D4887M - 11 Standard Practice for Preparation of Viscosity Blends for Hot Recycled Bituminous Materials
    D5404 / D5404M - 12 Standard Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator
    D6307 - 10 Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method
    D6390 - 11 Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures
    D7906 - 14 Standard Practice for Recovery of Asphalt from Solution Using Toluene and the Rotary Evaporator

    Asphalt Specifications

    DesignationTitle
    D946 / D946M - 09a Standard Specification for Penetration-Graded Asphalt Cement for Use in Pavement Construction
    D2026 / D2026M - 97(2010)e1 Standard Specification for Cutback Asphalt (Slow-Curing Type)
    D2027 / D2027M - 13 Standard Specification for Cutback Asphalt (Medium-Curing Type)
    D2028 / D2028M - 10 Standard Specification for Cutback Asphalt (Rapid-Curing Type)
    D2399 - 12 Standard Practice for Selection of Cutback Asphalts
    D3141 / D3141M - 09 Standard Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements
    D3381 / D3381M - 13 Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction
    D4311 / D4311M - 09 Standard Practice for Determining Asphalt Volume Correction to a Base Temperature
    D4552 / D4552M - 10 Standard Practice for Classifying Hot-Mix Recycling Agents
    D5710 / D5710M - 13 Standard Specification for Trinidad Lake Modified Asphalt
    D6114 / D6114M - 09 Standard Specification for Asphalt-Rubber Binder
    D6154 - 09 Standard Specification for Chemically Modified Asphalt Cement for Use in Pavement Construction
    D6373 - 13 Standard Specification for Performance Graded Asphalt Binder
    D6626 - 09 Standard Specification for Performance Graded Trinidad Lake Modified Asphalt Binder

    Asphalt Surface Treatments

    DesignationTitle
    D1369 - 84(2012) Standard Practice for Quantities of Materials for Bituminous Surface Treatments
    D2995 - 99(2009) Standard Practice for Estimating Application Rate of Bituminous Distributors
    D3910 - 11 Standard Practices for Design, Testing, and Construction of Slurry Seal
    D5360 - 09 Standard Practice for Design and Construction of Bituminous Surface Treatments
    D5624 - 13 Standard Practice for Determining the Transverse-Aggregate Spread Rate for Surface Treatment Applications
    D6372 - 05(2010) Standard Practice for Design, Testing, and Construction of Micro-Surfacing
    D7000 - 11 Standard Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples
    D7564 / D7564M - 09 Standard Practice for Construction of Asphalt-Rubber Cape Seal

    Bridges and Structures

    DesignationTitle
    D3633 / D3633M - 12 Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems
    D3963 / D3963M - 01(2007) Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars
    D4014 - 03(2012) Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges
    D4071 - 84(2011) Standard Practice for Use of Portland Cement Concrete Bridge Deck Water Barrier Membrane Systems
    D4580 / D4580M - 12 Standard Practice for Measuring Delaminations in Concrete Bridge Decks by Sounding
    D4788 - 03(2013) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
    D5977 - 03(2012) Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures
    D6087 - 08 Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar
    D6153 - 97(2007) Standard Specification for Materials for Bridge Deck Waterproofing Membrane Systems
    D6297 - 13 Standard Specification for Asphaltic Plug Joints for Bridges

    Calcium and Sodium Chlorides and Other Deicing Materials

    DesignationTitle
    D98 - 05(2013) Standard Specification for Calcium Chloride
    D345 - 02(2010) Standard Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications
    D632 - 12 Standard Specification for Sodium Chloride

    Cold Mix Asphalts

    DesignationTitle
    D4215 - 07(2013) Standard Specification for Cold-Mixed, Cold-Laid Bituminous Paving Mixtures
    D6627 / D6627M - 11 Standard Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures
    D6704 - 08 Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material
    D7196 - 12 Standard Test Method for Raveling Test of Cold Mixed Emulsified Asphalt Samples
    D7229 - 08(2013)e1 Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor

    Durability and Distillation Tests

    DesignationTitle
    D243 / D243M - 14 Standard Test Method for Residue of Specified Penetration
    D402 / D402M - 14 Standard Test Method for Distillation of Cutback Asphalt
    D1754 / D1754M - 09 Standard Test Method for Effect of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)
    D2872 - 12e1 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
    D6521 - 13 Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)

    Effect of Water and Other Elements on Asphalt Coated Aggregates

    DesignationTitle
    D1075 - 11 Standard Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures
    D3625 / D3625M - 12 Standard Practice for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water
    D4867 / D4867M - 09 Standard Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures
    D7870 / D7870M - 13 Standard Practice for Moisture Conditioning Compacted Asphalt Mixture Specimens by Using Hydrostatic Pore Pressure

    Emulsified Asphalt Specifications

    DesignationTitle
    D977 - 13e1 Standard Specification for Emulsified Asphalt
    D2397 / D2397M - 13 Standard Specification for Cationic Emulsified Asphalt
    D3628 - 08 Standard Practice for Selection and Use of Emulsified Asphalts
    D5505 - 14 Standard Practice for Classifying Emulsified Recycling Agents

    Emulsified Asphalt Test

    DesignationTitle
    D244 - 09 Standard Test Methods and Practices for Emulsified Asphalts
    D6929 - 10 Standard Practice for Freezing of Emulsified Asphalts
    D6930 - 10 Standard Test Method for Settlement and Storage Stability of Emulsified Asphalts
    D6933 - 13 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)
    D6934 - 08 Standard Test Method for Residue by Evaporation of Emulsified Asphalt
    D6935 - 11 Standard Test Method for Determining Cement Mixing of Emulsified Asphalt
    D6936 - 09 Standard Test Method for Determining Demulsibility of Emulsified Asphalt
    D6937 - 08 Standard Test Method for Determining Density of Emulsified Asphalt
    D6997 - 12 Standard Test Method for Distillation of Emulsified Asphalt
    D6998 - 11 Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts
    D6999 - 12 Standard Practice for Miscibility of Emulsified Asphalts
    D7226 - 13 Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
    D7402 - 09 Standard Practice for Identifying Cationic Emulsified Asphalts
    D7403 - 09 Standard Test Method for Determination of Residue of Emulsified Asphalt by Low Temperature Vacuum Distillation
    D7404 - 07(2012) Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
    D7496 - 11 Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer
    D7497 - 09 Standard Practice for Recovering Residue from Emulsified Asphalt Using Low Temperature Evaporative Technique

    Field Methods for Measuring Tire Pavement Friction

    DesignationTitle
    E274 / E274M - 11 Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire
    E445 / E445M - 88(2013) Standard Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped With Full-Scale Tires
    E556 / E556M - 11 Standard Test Method for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level)
    E670 - 09 Standard Test Method for Side Force Friction on Paved Surfaces Using the Mu-Meter
    E1337 - 90(2012) Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire
    E1859 / E1859M - 11e1 Standard Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique
    E1890 - 11 Standard Guide for Validating New Area Reference Skid Measurement Systems and Equipment
    E1911 - 09ae1 Standard Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester
    E1960 - 07(2011) Standard Practice for Calculating International Friction Index of a Pavement Surface
    E2100 - 04(2010) Standard Practice for Calculating the International Runway Friction Index
    E2340 / E2340M - 11e1 Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique
    E2341 / E2341M - 05(2009) Standard Test Method for Determining the Stopping Distance Number by Initial Speed and Stopping Distance at Traffic Incident Sites
    E2666 - 09 Standard Practice for Correlations of Mu Values of Continuous Friction Measurement Equipment to Determine Maintenance Levels for Use at Airports
    E2793 - 10e1 Standard Guide for the Evaluation, Calibration, and Correlation of E274 Friction Measurement Systems and Equipment
    E2883 - 13 Standard Guide for Standard Guide for the Evaluation, and Calibration, Continuous Friction Measurement Equipment (CFME)

    Formed In-Place Sealants for Joints and Cracks in Pavements

    DesignationTitle
    D1985 - 13 Standard Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks
    D5078 / D5078M - 11 Standard Specification for Crack Filler, Hot-Applied, for Asphalt Concrete and Portland Cement Concrete Pavements
    D5167 - 13 Standard Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation
    D5249 - 10 Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints
    D5329 - 09 Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements
    D5893 / D5893M - 10 Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements
    D6690 - 12 Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements

    Fundamental/Mechanistic Tests

    DesignationTitle
    D3387 - 11 Standard Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM)
    D6931 - 12 Standard Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures
    D7312 - 10 Standard Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST)
    D7313 - 13 Standard Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry
    D7369 - 11 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension Test
    D7460 - 10 Standard Test Method for Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending
    D7552 - 09 Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer

    Highway Traffic Control Materials

    DesignationTitle
    D4280 - 12 Standard Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers
    D4383 - 12 Standard Specification for Plowable, Raised Retroreflective Pavement Markers
    D4505 - 12 Standard Specification for Preformed Retroreflective Pavement Marking Tape for Extended Service Life
    D4592 - 12 Standard Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life
    D4956 - 13 Standard Specification for Retroreflective Sheeting for Traffic Control
    D6628 - 03(2010)e1 Standard Specification for Color of Pavement Marking Materials
    D7585 / D7585M - 10 Standard Practice for Evaluating Retroreflective Pavement Markings Using Portable Hand-Operated Instruments

    Mechanical Tests of Asphalt Mixtures

    DesignationTitle
    D1074 - 09 Standard Test Method for Compressive Strength of Bituminous Mixtures
    D1560 - 09a Standard Test Methods for Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus
    D1561 / D1561M - 13 Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor
    D5581 - 07a(2013) Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)
    D6925 - 09 Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
    D6926 - 10 Standard Practice for Preparation of Bituminous Specimens Using Marshall Apparatus
    D6927 - 06 Standard Test Method for Marshall Stability and Flow of Bituminous Mixtures
    D7115 - 10 Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading

    Methodology for Analyzing Pavement Roughness

    DesignationTitle
    E1170 - 97(2012) Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces
    E1489 - 08(2013) Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device
    E1926 - 08 Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements
    E1927 - 98(2012) Standard Guide for Conducting Subjective Pavement Ride Quality Ratings
    E2034 - 99(2012) Standard Practices for Simulating Truck Response to Longitudinal Profiles of Vehicular Traveled Surfaces
    E2955 - 13 Standard Practice for Simulating Profilograph Response to Longitudinal Profiles of Traveled Surfaces

    Methods for Measuring Profile and Roughness

    DesignationTitle
    E950 / E950M - 09 Standard Test Method for Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer Established Inertial Profiling Reference
    E1082 - 90(2012) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
    E1215 - 93(2012) Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness
    E1274 - 03(2012) Standard Test Method for Measuring Pavement Roughness Using a Profilograph
    E1364 - 95(2012) Standard Test Method for Measuring Road Roughness by Static Level Method
    E1448 / E1448M - 09 Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness
    E1703 / E1703M - 10 Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge
    E2133 - 03(2013) Standard Test Method for Using a Rolling Inclinometer to Measure Longitudinal and Transverse Profiles of a Traveled Surface
    E2560 - 13 Standard Specification for Data Format for Pavement Profile

    Methods of Sampling

    DesignationTitle
    D75 / D75M - 14 Standard Practice for Sampling Aggregates
    D140 / D140M - 14 Standard Practice for Sampling Bituminous Materials
    D979 / D979M - 12 Standard Practice for Sampling Bituminous Paving Mixtures
    D3665 - 12 Standard Practice for Random Sampling of Construction Materials
    D5361 / D5361M - 14 Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing

    Miscellaneous Asphalt Tests

    DesignationTitle
    D70 - 09e1 Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)
    D2042 - 09 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene
    D3142 / D3142M - 11 Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method
    D3143 / D3143M - 13 Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus
    D3279 - 12 Standard Test Method for n-Heptane Insolubles
    D3289 - 08 Standard Test Method for Density of Semi-Solid and Solid Bituminous Materials (Nickel Crucible Method)
    D4124 - 09 Standard Test Method for Separation of Asphalt into Four Fractions
    D5546 - 09 Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge
    D6608 - 12 Standard Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes
    D6703 - 14 Standard Test Method for Automated Heithaus Titrimetry
    D7173 - 14 Standard Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt
    D7553 - 10 Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide

    Pavement Management and Data Needs

    DesignationTitle
    D5340 - 12 Standard Test Method for Airport Pavement Condition Index Surveys
    D6433 - 11 Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys
    E1166 - 00(2009) Standard Guide for Network Level Pavement Management
    E1656 / E1656M - 11 Standard Guide for Classification of Automated Pavement Condition Survey Equipment
    E1777 - 09 Standard Guide for Prioritization of Data Needs for Pavement Management
    E1778 - 98a(2008) Standard Terminology Relating to Pavement Distress
    E1889 - 97(2009) Standard Guide for Pavement Management Implementation
    E2840 - 11 Standard Practice for Pavement Condition Index Surveys for Interlocking Concrete Roads and Parking Lots

    Pavement Testing and Evaluation

    DesignationTitle
    D1195 / D1195M - 09 Standard Test Method for Repetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements
    D1196 / D1196M - 12 Standard Test Method for Nonrepetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements
    D4602 - 93(2008) Standard Guide for Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection Equipment
    D4694 - 09 Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device
    D4695 - 03(2008) Standard Guide for General Pavement Deflection Measurements
    D4748 - 10 Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar
    D5858 - 96(2008) Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory
    D6951 / D6951M - 09 Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
    D7228 - 06a(2011) Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures
    E2583 - 07(2011) Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)
    E2835 - 11 Standard Test Method for Measuring Deflections using a Portable Impulse Plate Load Test Device

    Plant-Mixed Asphalt Surfaces and Bases

    DesignationTitle
    D2489 / D2489M - 08 Standard Practice for Estimating Degree of Particle Coating of Bituminous-Aggregate Mixtures
    D6932 / D6932M - 08(2013) Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Mixtures
    D7064 / D7064M - 08(2013) Standard Practice for Open-Graded Friction Course (OGFC) Mix Design

    Preformed Joint Fillers, Sealers and Sealing Systems

    DesignationTitle
    D517 - 98(2008) Standard Specification for Asphalt Plank
    D545 - 14 Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)
    D994 / D994M - 11 Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type)
    D1751 - 04(2013)e1 Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types)
    D1752 - 04a(2013) Standard Specification for Preformed Sponge Rubber Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction
    D2628 - 91(2011) Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
    D2835 - 89(2012) Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements
    D3542 - 08(2013) Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges
    D4070 - 08 Standard Specification for Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures
    D5973 - 97(2012) Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing
    D6924 - 03(2012) Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges
    D7174 - 05(2011) Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction

    Quality Control, Inspection and Testing Agencies

    DesignationTitle
    D3666 - 13 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
    D4561 - 11 Standard Practice for Quality Control Systems for Organizations Producing and Applying Bituminous Paving Materials
    D5506 - 08 Standard Practice for Organizations Engaged in the Certification of Personnel Testing and Inspecting Bituminous Paving Materials
    D7495 - 12 Standard Specification for Minimum Requirements for Accreditation Bodies that Accredit Agencies Testing and Inspecting Road and Paving Materials

    Rheological Tests

    DesignationTitle
    D5 / D5M - 13 Standard Test Method for Penetration of Bituminous Materials
    D113 - 07 Standard Test Method for Ductility of Bituminous Materials
    D139 - 12 Standard Test Method for Float Test for Bituminous Materials
    D2170 / D2170M - 10 Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens)
    D2171 / D2171M - 10 Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
    D2493 / D2493M - 09 Standard Viscosity-Temperature Chart for Asphalts
    D4957 - 08 Standard Test Method for Apparent Viscosity of Asphalt Emulsion Residues and Non-Newtonian Bitumens by Vacuum Capillary Viscometer
    D5801 - 12 Standard Test Method for Toughness and Tenacity of Bituminous Materials
    D6084 / D6084M - 13 Standard Test Method for Elastic Recovery of Bituminous Materials by Ductilometer
    D6648 - 08 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
    D6723 - 12 Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)
    D6816 - 11 Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders
    D7175 - 08 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
    D7405 - 10a Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
    D7643 - 10 Standard Practice for Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders
    D7741 / D7741M - 11e1 Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Hand Held Viscometer

    Specific Gravity and Density of Asphalt Mixtures

    DesignationTitle
    D1188 - 07e1 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
    D2041 / D2041M - 11 Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures
    D2726 / D2726M - 14 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
    D2950 / D2950M - 14 Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods
    D3203 / D3203M - 11 Standard Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures
    D3549 / D3549M - 11 Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens
    D6752 / D6752M - 11 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
    D6857 / D6857M - 11 Standard Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method
    D6995 - 05(2013) Standard Test Method for Determining Field VMA based on the Maximum Specific Gravity of the Mix (Gmm)
    D7063 / D7063M - 11 Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Bituminous Paving Mixture Samples
    D7113 / D7113M - 10 Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods
    D7227 / D7227M - 11e1 Standard Practice for Rapid Drying of Compacted Asphalt Specimens Using Vacuum Drying Apparatus

    Specifications and Test for Tar and Tar Products

    DesignationTitle
    D20 - 03(2009) Standard Test Method for Distillation of Road Tars
    D490 - 92(2011) Standard Specification for Road Tar
    D633 - 11 Standard Volume Correction Table for Road Tar
    D1665 - 98(2009) Standard Test Method for Engler Specific Viscosity of Tar Products
    D2728 - 98(2009) Standard Practice for Paving Uses and Application Temperatures for Road Tars

    Statistical Procedures and Evaluation of Data

    DesignationTitle
    D4460 - 97(2009) Standard Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods
    D6607 - 00(2009) Standard Practice for Inclusion of Precision Statement Variation in Specification Limits

    Surface Characteristics Related to Tire Pavement Slip Resistance

    DesignationTitle
    E303 - 93(2013) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
    E660 - 90(2011) Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine
    E965 - 96(2006) Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique
    E1845 - 09 Standard Practice for Calculating Pavement Macrotexture Mean Profile Depth
    E2157 - 09 Standard Test Method for Measuring Pavement Macrotexture Properties Using the Circular Track Meter
    E2380 / E2380M - 09 Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter

    Terminology

    DesignationTitle
    D8 - 13b Standard Terminology Relating to Materials for Roads and Pavements

    Terminology

    DesignationTitle
    E867 - 06(2012) Standard Terminology Relating to Vehicle-Pavement Systems

    Tire and Slider Characteristics

    DesignationTitle
    E501 - 08 Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests
    E524 - 08 Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests
    E1551 - 08 Standard Specification for Special Purpose, Smooth–Tread Tire, Operated on Fixed Braking Slip Continuous Friction Measuring Equipment
    E1844 - 08 Standard Specification for A Size 10 & 4–5 Smooth-Tread Friction Test Tire

    Traffic Monitoring

    DesignationTitle
    E1318 - 09 Standard Specification for Highway Weigh-in-Motion (WIM) Systems with User Requirements and Test Methods
    E1957 - 04(2010) Standard Practice for Installing Using Pneumatic Tubes with Roadway Traffic Counters and Classifiers
    E2259 - 03a(2011) Standard Guide for Archiving and Retrieving ITS-Generated Data
    E2300 - 09 Standard Specification for Highway Traffic Monitoring Devices
    E2415 - 05(2012) Standard Practice for Installing Piezoelectric Highway Traffic Sensors
    E2467 - 05(2012) Standard Practice for Developing Axle Count Adjustment Factors
    E2468 - 05(2012) Standard Practice for Metadata to Support Archived Data Management Systems
    E2532 - 09 Standard Test Methods for Evaluating Performance of Highway Traffic Monitoring Devices
    E2561 - 07a(2012) Standard Practice for the Installation of Inductive Loop Detectors
    E2667 - 09 Standard Practice for Acquiring Intersection Turning Movement Traffic Data
    E2759 - 10 Standard Practice for Highway Traffic Monitoring Truth-in-Data

    Vehicle Roadside Communication

    DesignationTitle
    E2213 - 03(2010) Standard Specification for Telecommunications and Information Exchange Between Roadside and Vehicle Systems — 5 GHz Band Dedicated Short Range Communications (DSRC) Medium Access Control (MAC) and Physical Layer (PHY) Specifications

    Other standards developed by ASTM committees:


    3D Imaging Standards

    Additive Manufacturing Standards

    Adhesive Standards

    Aerospace Material Standards

    Analytical Chemistry Standards

    Asset Management Standards

    Atmospheric Analysis Standards

    Biotechnology Standards

    Construction Standards

    Business Copy Product Standards

    Carbon Standards

    Catalyst Standards

    Cement Standards and Concrete Standards

    Coal Standards and Gas Standards

    Composite Standards

    Computerized System Standards

    Consumer Product Evaluation Standards

    Copper Standards

    Corrosion Standards and Wear Standards

    Durability of Nonmetallic Material Standards

    Electrical Insulating Material Standards

    Electrical Standards and Magnetic Conductor Standards

    Electronics Standards

    Environmental Standards

    Fastener Standards

    Fatigue Standards and Fracture Standards

    Fire Standards and Flammability Standards

    Forensic Science Standards

    Geotechnical Engineering Standards

    Glass Standards and Ceramic Standards

    Industrial Chemical Standards

    Industrial Hygiene Standards and Safety Standards

    Laboratory Testing Standards

    Leather Standards

    Masonry Standards

    Medical Device Standards and Implant Standards