Plastic Pipe Standards

    ASTM's plastic pipe standards are instrumental in specifying, testing, and evaluating the physical, mechanical, design, and installation requirements for plastic, polymeric, or elastomeric pipes, tubing, and fittings, including the seals, threads, and couplings that join them together. Such products are intended for use in high pressure storage vessels, water distribution systems, waste drainage and sewerage systems, agricultural drainage and septic tank leach fields, and existing sewer and conduit rehabilitation. These plastic pipe standards help product manufacturers, industrial processing plants, plumbing companies, and other users and producers of these products to ensure proper and safe fabrication, assessment, installation, and utilization.

    List of plastic pipe standards developed by ASTM:


    Jump to:

    Composite

    DesignationTitle
    F1281 - 11 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
    F1282 - 10 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
    F1488 - 09e1 Standard Specification for Coextruded Composite Pipe
    F1545 - 97(2009) Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges
    F1986 - 01(2011) Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems
    F1987 - 01(2011) Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems
    F2165 - 13 Standard Specification for Flexible Pre-Insulated Piping
    F2262 - 09 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9
    F2435 - 12 Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe
    F2562 / F2562M - 08 Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage
    F2720 / F2720M - 09 Standard Specification for Glass Fiber Reinforced Polyethylene (PE-GF) Spiral Wound Large Diameter Pipe
    F2807 - 13 Standard Specification for Multilayer Polyethylene-Polyamide (PE-PA) Pipe for Pressure Piping Applications
    F2896 - 11 Standard Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids

    DWV

    DesignationTitle
    D2661 - 11 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
    D2665 - 14 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
    D2949 - 10 Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
    D3311 - 11 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
    F409 - 12 Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
    F628 - 12e1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core
    F1412 - 09 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
    F1499 - 12 Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)
    F1673 - 10 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
    F1866 - 13 Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings
    F1901 - 10 Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems
    F2021 - 11 Standard Guide for Design and Installation of Plastic Siphonic Roof Drainage Systems
    F2135 - 01(2012) Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings
    F2390 - 12 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content
    F2536 - 06b(2011) Standard Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs
    F2618 - 09 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems

    Editorial and Terminology

    DesignationTitle
    F412 - 13 Standard Terminology Relating to Plastic Piping Systems

    Energy Piping Systems

    DesignationTitle
    F2619 / F2619M - 13 Standard Specification for High-Density Polyethylene (PE) Line Pipe
    F2686 - 10 Standard Specification for Glass Fiber Reinforced Thermoplastic Pipe
    F2805 - 11 Standard Specification for Multilayer Thermoplastic And Flexible Steel Pipe And Connections
    F2905 / F2905M - 13 Standard Specification for Black Crosslinked Polyethylene (PEX) Line Pipe, Fittings and Joints For Oil and Gas Producing Applications

    Fittings

    DesignationTitle
    D2464 - 13 Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
    D2466 - 13 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
    D2467 - 13a Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
    D2609 - 02(2008) Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
    D2683 - 10e3 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
    D2749 - 13 Standard Symbols for Dimensions of Plastic Pipe Fittings
    D3261 - 12e1 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
    F437 - 09 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
    F438 - 09 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
    F439 - 13 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
    F1055 - 13 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing
    F1498 - 08(2012)e1 Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings
    F1733 - 13 Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
    F1807 - 14 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
    F1865 - 09 Standard Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing
    F1960 - 12 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
    F1961 - 09 Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing
    F1970 - 12e1 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
    F1974 - 09 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe
    F2080 - 12e1 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe
    F2098 - 08 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert and Plastic Insert Fittings
    F2159 - 14 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
    F2176 - 02(2009) Standard Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct
    F2206 - 11 Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock
    F2434 - 14 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing
    F2735 - 09 Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
    F2768 - 09 Standard Specification for Modified Stub ACME Thread Joint with Elastomeric Seal in Plastic Piping Components
    F2854 - 10 Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing
    F2880 - 14 Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes 3/4 in. to 65 in.

    Gas

    DesignationTitle
    D2513 - 14e1 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
    F689 - 97(2011) Standard Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe Within Metallic Casings
    F905 - 04(2011) Standard Practice for Qualification of Polyethylene Saddle-Fused Joints
    F1025 - 94(2011) Standard Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe
    F1041 - 02(2008) Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing
    F1563 - 01(2011) Standard Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing
    F1734 - 03(2009) Standard Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe
    F1804 - 08(2012) Standard Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation
    F1924 - 12 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
    F1948 - 12 Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing
    F1973 - 13e1 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems
    F2138 - 12 Standard Specification for Excess Flow Valves for Natural Gas Service
    F2145 - 13 Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing
    F2207 - 06(2013) Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe
    F2509 - 12 Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
    F2600 - 09(2013) Standard Specification for Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe and Tubing
    F2767 - 12 Standard Specification for Electrofusion Type Polyamide-12 Fittings for Outside Diameter Controlled Polyamide-12 Pipe and Tubing for Gas Distribution
    F2785 - 12 Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
    F2817 - 13 Standard Specification for Poly (Vinyl Chloride) (PVC) Gas Pressure Pipe and Fittings For Maintenance or Repair
    F2818 - 10 Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing
    F2830 - 11 Standard Specification for Manufacture and Joining of Polyethylene (PE) Gas Pressure Pipe With a Peelable Polypropylene (PP) Outer Layer
    F2897 - 14 Standard Specification for Tracking and Traceability Encoding System of Natural Gas Distribution Components (Pipe, Tubing, Fittings, Valves, and Appurtenances)
    F2945 - 12a Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings
    F2968 / F2968M - 14 Standard Specification for Black Crosslinked Polyethylene (PEX) Pipe, Fittings and Joints For Gas Distribution Applications

    Joining

    DesignationTitle
    D2235 - 04(2011) Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
    D2564 - 12 Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems
    D2657 - 07 Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings
    D2672 - 96a(2009) Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement
    D2855 - 96(2010) Standard Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings
    D3122 - 95(2009) Standard Specification for Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings
    D3138 - 04(2011) Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components
    D3139 - 98(2011) Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
    D3212 - 07(2013) Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
    F402 - 05(2012) Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings
    F477 - 10 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
    F493 - 10 Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings
    F656 - 10 Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings
    F913 - 02(2014) Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe
    F1056 - 04(2011) Standard Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings
    F1290 - 98a(2011) Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings
    F1674 - 11 Standard Test Method for Joint Restraint Products for Use with PVC Pipe
    F2487 - 13 Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene and Polypropylene Pipelines
    F2510 / F2510M - 07(2013) Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated High Density Polyethylene Drainage Pipes
    F2620 - 13 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
    F2946 - 12 Standard Specification for PVC Hub and Elastomeric Seal (Gasket) Tee Connection for Joining Plastic Pipe to Insitu Pipelines and Manholes

    Land Drainage

    DesignationTitle
    D2852 - 95(2008) Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings
    F405 - 13 Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings
    F449 - 02(2014) Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
    F481 - 97(2008) Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields
    F667 - 12 Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings
    F758 - 95(2007)e1 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage
    F810 - 12 Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields
    F2418 - 13 Standard Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers
    F2648 / F2648M - 13 Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications
    F2787 - 13 Standard Practice for Structural Design of Thermoplastic Corrugated Wall Stormwater Collection Chambers
    F2922 - 13e1 Standard Specification for Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers
    F2986 - 12 Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate Applications

    Olefin Based Pipe

    DesignationTitle
    D2239 - 12a Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
    D2737 - 12a Standard Specification for Polyethylene (PE) Plastic Tubing
    D3035 - 14a Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
    F714 - 13 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
    F876 - 13a Standard Specification for Crosslinked Polyethylene (PEX) Tubing
    F894 - 13 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
    F1533 - 01(2009) Standard Specification for Deformed Polyethylene (PE) Liner
    F1759 - 97(2010) Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
    F2160 - 10 Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
    F2623 - 08 Standard Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing
    F2649 - 08a Standard Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor Tanks
    F2736 - 13 Standard Specification for 6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe
    F2737 - 11 Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units
    F2769 - 10 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems
    F2788 / F2788M - 13 Standard Specification for Metric-sized Crosslinked Polyethylene (PEX) Pipe
    F2929 - 13 Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig
    F2987 - 12 Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Heap Leach Aeration Applications
    F3034 - 13 Standard Specification for Billets made by Winding Molten Extruded Stress-Rated High Density Polyethylene (HDPE)

    Sewer

    DesignationTitle
    D2321 - 14 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
    D2680 - 01(2009) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
    D2729 - 11 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
    D3034 - 14 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
    F585 - 13 Standard Guide for Insertion of Flexible Polyethylene Pipe Into Existing Sewers
    F679 - 13a Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
    F794 - 03(2009) Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
    F949 - 10 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
    F1336 - 07 Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings
    F1417 - 11a Standard Practice for Installation Acceptance of Plastic Non-pressure Sewer Lines Using Low-Pressure Air
    F1675 - 13 Standard Practice for Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
    F1732 - 12 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material
    F1803 - 06 Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter
    F2306 / F2306M - 13 Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications
    F2658 - 07(2013) Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings
    F2762 - 11e1 Standard Specification for 12 to 30 in. (300 to 750 mm) Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
    F2763 - 11 Standard Specification for 30 to 60 in. [750 to 1500 mm] Triple Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
    F2764 / F2764M - 11ae2 Standard Specification for 30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications
    F2881 - 11 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
    F2947 / F2947M - 14 Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications

    Test Methods

    DesignationTitle
    D1598 - 02(2009) Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
    D1599 - 99(2011) Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
    D2122 - 98(2010) Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
    D2290 - 12 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
    D2412 - 11 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
    D2444 - 99(2010) Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
    D2837 - 13e1 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
    D6070 - 02(2010) Standard Test Methods for Physical Properties of Smooth-Wall, Coilable, Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable
    F610 / F610M - 10 Standard Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique
    F725 - 03(2013) Standard Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards
    F948 - 94(2011) Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
    F1057 - 10 Standard Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique
    F1365 - 91(2013) Standard Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals
    F1429 - 99(2009) Standard Test Method for Assembly Force of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located in the Bell
    F1473 - 13 Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins
    F1588 - 96(2011) Standard Test Method for Constant Tensile Load Joint Test (CTLJT)
    F1802 - 04(2010) Standard Test Method for Performance Testing of Excess Flow Valves
    F2018 - 00(2010) Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
    F2023 - 13 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water
    F2136 - 08 Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
    F2164 - 13 Standard Practice for Field Leak Testing of Polyethylene (PE) and Crosslinked Polyethylene (PEX) Pressure Piping Systems Using Hydrostatic Pressure
    F2231 - 02(2013) Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes
    F2261 - 06(2011) Standard Test Method for Pressure Rating Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 and 80 Socket-Type
    F2263 - 14 Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water
    F2331 - 11 Standard Test Method for Determining Chemical Compatibility of Substances in Contact with Thermoplastic Pipe and Fittings Materials
    F2433 - 05(2013) Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness
    F2634 - 10 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
    F2657 - 07(2012) Standard Test Method for Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX) Tubing
    F2786 - 10 Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Media Under Pressure (Pneumatic Leak Testing)
    F2928 - 13 Standard Practice for Specimens and Testing Conditions for Testing Polyethylene (PE) Pipe Butt Fusions Using Tensile and Hydrostatic Test Methods

    Trenchless Plastic Pipeline Technology

    DesignationTitle
    F1216 - 09 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
    F1504 - 14 Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation
    F1606 - 05 Standard Practice for Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner
    F1697 - 09 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit
    F1698 - 02(2008) Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits
    F1735 - 09 Standard Specification for Poly (Vinyl Chloride)(PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits
    F1741 - 08 Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits
    F1743 - 08 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)
    F1867 - 06(2012) Standard Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation
    F1871 - 11 Standard Specification for Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation
    F1947 - 10 Standard Practice for Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits
    F1962 - 11 Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings
    F2019 - 11 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)
    F2561 - 11 Standard Practice for Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in-Place Liner
    F2599 - 11 Standard Practice for The Sectional Repair of Damaged Pipe By Means of An Inverted Cured-In-Place Liner
    F2718 - 09 Standard Specification for Polyethylene (PE) and Cement Materials for an Encapsulated Cement Mortar Formed in Place Liner System (FIPLS) for the Rehabilitation of Water Pipelines
    F2719 - 09 Standard Practice for Installation of Polyethylene (PE) and Encapsulated Cement Mortar Formed in Place Lining System (FIPLS) for the Rehabilitation of Water Pipelines
    F2831 - 12 Standard Practice for Internal Non Structural Epoxy Barrier Coating Material Used In Rehabilitation of Metallic Pressurized Piping Systems
    F2984 - 13 Standard Specification for Segmental Panel System for the Grout-in-Place-Liner (GIPL) Rehabilitation Method of Existing Man-Entry Size Sewers, Culverts, and Conduits
    F2994 - 13 Standard Practice for Utilization of Mobile, Automated Cured-In-Place Pipe (CIPP) Impregnation Systems

    Vinyl Based Pipe

    DesignationTitle
    D1785 - 12 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
    D2152 - 13 Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
    D2241 - 09 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
    F441 / F441M - 13e1 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
    F442 / F442M - 13e1 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)
    F512 - 12 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
    F891 - 10 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
    F1483 - 12 Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe
    F1760 - 01(2011) Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content

    Water

    DesignationTitle
    D2774 - 12 Standard Practice for Underground Installation of Thermoplastic Pressure Piping
    D2846 / D2846M - 09be1 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
    F480 - 14 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80
    F645 - 13 Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems
    F877 - 11a Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
    F1668 - 08 Standard Guide for Construction Procedures for Buried Plastic Pipe
    F2389 - 10 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
    F2806 - 10e1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)
    F2829 - 10 Standard Specification for Metric-Sized Crosslinked Polyethylene (PEX) Pipe Systems
    F2855 - 12 Standard Specification for Chlorinated Poly(Vinyl Chloride)/Aluminum/Chlorinated Poly(Vinyl Chloride) (CPVC-AL-CPVC) Composite Pressure Tubing
    F2969 - 12 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) IPS Dimensioned Pressure Pipe

    Other standards developed by ASTM committees:


    3D Imaging Standards

    Additive Manufacturing Standards

    Adhesive Standards

    Aerospace Material Standards

    Analytical Chemistry Standards

    Asset Management Standards

    Atmospheric Analysis Standards

    Biotechnology Standards

    Construction Standards

    Business Copy Product Standards

    Carbon Standards

    Catalyst Standards

    Cement Standards and Concrete Standards

    Coal Standards and Gas Standards

    Composite Standards

    Computerized System Standards

    Consumer Product Evaluation Standards

    Copper Standards

    Corrosion Standards and Wear Standards

    Durability of Nonmetallic Material Standards

    Electrical Insulating Material Standards

    Electrical Standards and Magnetic Conductor Standards

    Electronics Standards

    Environmental Standards

    Fastener Standards

    Fatigue Standards and Fracture Standards

    Fire Standards and Flammability Standards

    Forensic Science Standards

    Geotechnical Engineering Standards

    Glass Standards and Ceramic Standards

    Industrial Chemical Standards

    Industrial Hygiene Standards and Safety Standards

    Laboratory Testing Standards

    Leather Standards

    Masonry Standards

    Medical Device Standards and Implant Standards