Petroleum Standards

    ASTM's petroleum standards are instrumental in the evaluation and assessment of the physical, mechanical, rheological, thermal, and chemical properties of crude oils, lubricating grease, automobile and aviation gasoline, hydrocarbons, and other naturally occurring energy resources used for various industrial applications. These fuels are tested for their composition, purity, density, miscibility and compatibility with other fluids and materials, toxicity, and thermal stability among others. These petroleum standards allow petroleum refineries, automotive and aviation companies, and other geological and chemical processing plants to appropriately examine and process these fuel oils ensure their quality towards safe and efficient use.

    List of petroleum standards developed by ASTM:


    Jump to:

    Absorption Spectroscopic Methods

    DesignationTitle
    D1840 - 07(2013) Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
    D2008 - 12 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
    D2269 - 10 Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
    D5292 - 99(2014) Standard Test Method for Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy
    D5845 - 01(2011) Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy
    D6277 - 07(2012) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
    D7371 - 12 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
    D7806 - 12 Standard Test Method for Determination of the Fatty Acid Methyl Ester (FAME) Content of a Blend of Biodiesel and Petroleum-Based Diesel Fuel Oil Using Mid-Infrared Spectroscopy

    Additives and Electrical Properties

    DesignationTitle
    D2624 - 09 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
    D4054 - 09 Standard Practice for Qualification and Approval of New Aviation Turbine Fuels and Fuel Additives
    D4171 - 11 Standard Specification for Fuel System Icing Inhibitors
    D4306 - 13 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
    D4308 - 13 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
    D4865 - 09 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
    D5001 - 10 Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)
    D5006 - 11 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels

    Analysis of Lubricants

    DesignationTitle
    D91 - 02(2012) Standard Test Method for Precipitation Number of Lubricating Oils
    D94 - 07(2012) Standard Test Methods for Saponification Number of Petroleum Products
    D189 - 06(2010)e1 Standard Test Method for Conradson Carbon Residue of Petroleum Products
    D322 - 97(2012) Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation
    D483 - 04(2014) Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils
    D524 - 10 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products
    D565 - 99(2013) Standard Test Method for Carbonizable Substances in White Mineral Oil
    D664 - 11a Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
    D892 - 13 Standard Test Method for Foaming Characteristics of Lubricating Oils
    D893 - 14 Standard Test Method for Insolubles in Used Lubricating Oils
    D974 - 12 Standard Test Method for Acid and Base Number by Color-Indicator Titration
    D1093 - 11 Standard Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues
    D2273 - 08(2012) Standard Test Method for Trace Sediment in Lubricating Oils
    D2896 - 11 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
    D2982 - 07(2013) Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils
    D3242 - 11 Standard Test Method for Acidity in Aviation Turbine Fuel
    D3339 - 12 Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration
    D3607 - 08(2012) Standard Test Method for Removing Volatile Contaminants from Used Engine Oils by Stripping
    D4055 - 04(2013) Standard Test Method for Pentane Insolubles by Membrane Filtration
    D4530 - 11 Standard Test Method for Determination of Carbon Residue (Micro Method)
    D4739 - 11 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
    D5770 - 11 Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
    D5800 - 10 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
    D5984 - 11 Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration
    D6082 - 12 Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils
    D6375 - 09(2014) Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
    D7317 - 07(2013) Standard Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method)
    D7579 - 09(2013) Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol
    D7795 - 12 Standard Test Method for Acidity in Ethanol and Ethanol Blends by Titration
    D7946 - 14 Standard Test Method for Initial pH (i-pH)-Value of Petroleum Products

    Automotive Gear Lubricants & Fluids

    DesignationTitle
    D4998 - 13 Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids
    D5579 - 14 Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test
    D5662 - 13 Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers
    D5704 - 14 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles
    D5760 - 13 Standard Specification for Performance of Manual Transmission Gear Lubricants
    D6121 - 14 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
    D7452 - 12 Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading

    Automotive Greases

    DesignationTitle
    D4950 - 13 Standard Classification and Specification for Automotive Service Greases

    Automotive Lubricants

    DesignationTitle
    D3524 - 14 Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography
    D4485 - 11c Standard Specification for Performance of Active API Service Category Engine Oils
    D6794 - 14 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long(6?h) Heating Time
    D6795 - 13 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30 min) Heating Time
    D6891 - 14 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine
    D6922 - 13 Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils
    D6923 - 14 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure
    D6975 - 04(2010) Standard Test Method for Cummins M11 EGR Test
    D6987 / D6987M - 13a Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine
    D7038 - 13 Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants
    D7156 - 13 Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine
    D7422 - 14 Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine
    D7450 - 13 Standard Specification for Performance of Rear Axle Gear Lubricants Intended for API Category GL-5 Service
    D7468 - 13 Standard Test Method for Cummins ISM Test
    D7484 - 13a Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine
    D7549 - 14 Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure

    Aviation Fuels

    DesignationTitle
    D6812 - 04a(2010) Standard Practice for Ground-Based Octane Rating Procedures for Turbocharged/Supercharged Spark Ignition Aircraft Engines
    D6986 - 03(2010) Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)
    D7223 - 11 Standard Specification for Aviation Certification Turbine Fuel
    D7618 - 13 Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel
    D7719 - 14a Standard Specification for High-Octane Unleaded Fuel

    Burner, Diesel, Non-Aviation Gas Turbine, and Marine Fuels

    DesignationTitle
    D187 - 08(2013) Standard Test Method for Burning Quality of Kerosine
    D396 - 14 Standard Specification for Fuel Oils
    D975 - 14a Standard Specification for Diesel Fuel Oils
    D976 - 06(2011) Standard Test Method for Calculated Cetane Index of Distillate Fuels
    D2156 - 09(2013) Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels
    D2157 - 94(2013) Standard Test Method for Effect of Air Supply on Smoke Density in Flue Gases from Burning Distillate Fuels
    D2880 - 14 Standard Specification for Gas Turbine Fuel Oils
    D3699 - 13b Standard Specification for Kerosine
    D4418 - 00(2011) Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines
    D4737 - 10 Standard Test Method for Calculated Cetane Index by Four Variable Equation
    D6078 - 04(2010) Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE)
    D6079 - 11 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
    D6751 - 12 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
    D6898 - 03(2010) Standard Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig
    D7467 - 13 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
    D7544 - 12 Standard Specification for Pyrolysis Liquid Biofuel
    D7688 - 11 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) by Visual Observation

    C4 Hydrocarbons

    DesignationTitle
    D1025 - 10 Standard Test Method for Nonvolatile Residue of Polymerization Grade Butadiene
    D1157 - 91(2014) Standard Test Method for Total Inhibitor Content (TBC) of Light Hydrocarbons
    D2384 - 83(2014) Standard Test Methods for Traces of Volatile Chlorides in Butane-Butene Mixtures
    D2426 - 93(2014) Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography
    D2593 - 93(2014) Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography
    D4423 - 10 Standard Test Method for Determination of Carbonyls In C4 Hydrocarbons
    D4424 - 09(2014) Standard Test Method for Butylene Analysis by Gas Chromatography
    D5274 - 00(2014) Standard Guide for Analysis of 1,3–Butadiene Product
    D5799 - 95(2014) Standard Test Method for Determination of Peroxides in Butadiene
    D7423 - 09(2014) Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection

    Chemical and General Laboratory Tests

    DesignationTitle
    D128 - 98(2008) Standard Test Methods for Analysis of Lubricating Grease
    D1404 / D1404M - 99(2008) Standard Test Method for Estimation of Deleterious Particles in Lubricating Grease
    D4048 - 10 Standard Test Method for Detection of Copper Corrosion from Lubricating Grease
    D4289 - 13 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
    D6185 - 11 Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases

    Chemistry for the Evaluation of In-Service Lubricants

    DesignationTitle
    D7546 - 09 Standard Test Method for Determination of Moisture in New and In-Service Lubricating Oils and Additives by Relative Humidity Sensor
    D7593 - 13 Standard Test Method for Determination of Fuel Dilution for In-Service Engine Oils by Gas Chromatography
    D7899 - 13 Standard Test Method for Measuring the Merit of Dispersancy of In-Service Engine Oils with Blotter Spot Method

    Chromatographic Distribution Methods

    DesignationTitle
    D2887 - 13 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
    D3525 - 04(2010) Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography
    D5442 - 93(2013) Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography
    D6352 - 12 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700°C by Gas Chromatography
    D6417 - 09 Standard Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography
    D7096 - 10 Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography
    D7169 - 11 Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography
    D7213 - 12e1 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 to 615°C by Gas Chromatography
    D7398 - 11 Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100 to 615°C by Gas Chromatography
    D7500 - 12 Standard Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oils—in Boiling Range from 100 to 735°C by Gas Chromatography
    D7798 - 13 Standard Test Method for Boiling Range Distribution of Petroleum Distillates with Final Boiling Points up to 538°C by Ultra Fast Gas Chromatography (UF GC)
    D7807 - 12 Standard Test Method for Determination of Boiling Range Distribution of Hydrocarbon and Sulfur Components of Petroleum Distillates by Gas Chromatography and Chemiluminescence Detection

    Color and Reactivity

    DesignationTitle
    D7667 - 10e2 Standard Test Method for Determination of Corrosiveness to Silver by Automotive Spark-Ignition Engine Fuel—Thin Silver Strip Method
    D7671 - 10e1 Standard Test Method for Corrosiveness to Silver by Automotive Spark–Ignition Engine Fuel–Silver Strip Method

    Combustion and Thermal Properties

    DesignationTitle
    D1322 - 12e2 Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel
    D3241 - 14e1 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
    D7739 - 11 Standard Practice for Thermal Oxidative Stability Measurement via Quartz Crystal Microbalance

    Combustion Characteristics

    DesignationTitle
    D613 - 13 Standard Test Method for Cetane Number of Diesel Fuel Oil
    D909 - 14 Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline
    D2699 - 13b Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    D2700 - 13b Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
    D2885 - 13 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
    D6890 - 13be1 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
    D7170 - 14 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Fixed Range Injection Period, Constant Volume Combustion Chamber Method

    Compatibility

    DesignationTitle
    D6546 - 00(2010) Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications
    D7752 - 11 Standard Practice for Evaluating Compatibility of Mixtures of Hydraulic Fluids

    Consistency and Related Rheological Tests

    DesignationTitle
    D217 - 10 Standard Test Methods for Cone Penetration of Lubricating Grease
    D1092 - 12 Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases
    D1403 - 10 Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment
    D1831 - 11 Standard Test Method for Roll Stability of Lubricating Grease

    Coordinating Subcommittee on Quality Assurance and Statistics

    DesignationTitle
    D3244 - 12 Standard Practice for Utilization of Test Data to Determine Conformance with Specifications
    D6259 - 98(2010) Standard Practice for Determination of a Pooled Limit of Quantitation
    D6299 - 13 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
    D6300 - 14a Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
    D6617 - 13 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
    D6708 - 13 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
    D6792 - 13 Standard Practice for Quality System in Petroleum Products and Lubricants Testing Laboratories
    D7372 - 12 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results
    D7915 - 14 Standard Practice for Application of Generalized Extreme Studentized Deviate (GESD) Technique to Simultaneously Identify Multiple Outliers in a Data Set

    Correlative Methods

    DesignationTitle
    D2501 - 14 Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils
    D2502 - 14 Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils from Viscosity Measurements
    D2889 - 95(2010) Standard Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels
    D2890 - 92(2013) Standard Test Method for Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels
    D3238 - 95(2010) Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method
    D3343 - 05(2010) Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels
    D7215 - 08(2013) Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels

    Corrosion and Water/Air Separability

    DesignationTitle
    D665 - 12 Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water
    D1401 - 12 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
    D3427 - 14 Standard Test Method for Air Release Properties of Petroleum Oils
    D3603 - 07 Standard Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method)

    Corrosion Testing of Sheet Metal Processing Fluids

    DesignationTitle
    D1748 - 10 Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet

    Density Determination (API MPMS Chapter 9.0)

    DesignationTitle
    D6822 - 12b Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method

    Development and Surveillance of Bench Tests Methods

    DesignationTitle
    D7216 - 13 Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers
    D7528 - 13 Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus
    D7563 - 10 Standard Test Method for Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel

    Elemental Analysis

    DesignationTitle
    C1234 - 11 Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations
    D129 - 13 Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method)
    D482 - 13 Standard Test Method for Ash from Petroleum Products
    D808 - 11 Standard Test Method for Chlorine in New and Used Petroleum Products (High Pressure Decomposition Device Method)
    D874 - 13a Standard Test Method for Sulfated Ash from Lubricating Oils and Additives
    D1018 - 11 Standard Test Method for Hydrogen In Petroleum Fractions
    D1091 - 11 Standard Test Methods for Phosphorus in Lubricating Oils and Additives
    D1266 - 13 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
    D1318 - 00(2011) Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method)
    D1552 - 08(2014)e1 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
    D1839 - 14 Standard Test Method for Amyl Nitrate in Diesel Fuels
    D2622 - 10 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
    D2784 - 11 Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp)
    D3120 - 08(2014) Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
    D3227 - 13 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
    D3228 - 08(2014) Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method
    D3230 - 13 Standard Test Method for Salts in Crude Oil (Electrometric Method)
    D3231 - 13 Standard Test Method for Phosphorus in Gasoline
    D3237 - 12 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
    D3246 - 14 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
    D3341 - 05(2011) Standard Test Method for Lead in Gasoline - Iodine Monochloride Method
    D3348 - 12 Standard Test Method for Rapid Field Test for Trace Lead in Unleaded Gasoline (Colorimetric Method)
    D3605 - 00(2011) Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy
    D3701 - 01(2012) Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry
    D3831 - 12 Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
    D4045 - 04(2010) Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry
    D4046 - 14 Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry
    D4047 - 13 Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method
    D4294 - 10 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
    D4628 - 05(2011)e1 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry
    D4629 - 12 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
    D4808 - 01(2012) Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy
    D4927 - 10 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
    D4929 - 07(2014) Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
    D4951 - 09 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
    D4952 - 12 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
    D5056 - 04(2010) Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
    D5059 - 14 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy
    D5184 - 12 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
    D5185 - 13e1 Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    D5291 - 10 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
    D5384 - 14 Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)
    D5453 - 12 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
    D5600 - 14 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    D5622 - 95(2011) Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis
    D5708 - 12 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry
    D5761 - 96(2012) Standard Practice for Emulsification/Suspension of Multiphase Fluid Waste Materials
    D5762 - 12 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
    D5863 - 00a(2011) Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
    D6334 - 12 Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence
    D6443 - 04(2010) Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)
    D6470 - 99(2010) Standard Test Method for Salt in Crude Oils (Potentiometric Method)
    D6481 - 99(2010) Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy
    D6595 - 00(2011) Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry
    D6667 - 10 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
    D6728 - 11 Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry
    D6732 - 04(2010) Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry
    D6920 - 13 Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection
    D7039 - 13 Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
    D7040 - 04(2010) Standard Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
    D7041 - 04(2010)e1 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels, and Oils by Online Gas Chromatography with Flame Photometric Detection
    D7111 - 14 Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    D7171 - 05(2011) Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy
    D7212 - 13 Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter
    D7220 - 12 Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry
    D7260 - 12 Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants
    D7303 - 12 Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry
    D7318 - 13 Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration
    D7319 - 13 Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography
    D7328 - 13 Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
    D7343 - 12 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
    D7455 - 14 Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis
    D7482 - 08 Standard Practice for Sampling, Storage, and Handling of Hydrocarbons for Mercury Analysis
    D7578 - 10e1 Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants
    D7620 - 10 Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection
    D7622 - 10e1 Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
    D7623 - 10 Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method
    D7691 - 11e1 Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    D7740 - 11 Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants
    D7751 - 12 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis
    D7757 - 12 Standard Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
    D7876 - 13 Standard Practice for Practice for Sample Decomposition Using Microwave Heating (With or Without Prior Ashing) for Atomic Spectroscopic Elemental Determination in Petroleum Products and Lubricants

    Emerging Turbine Fuels

    DesignationTitle
    D7566 - 14a Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons

    Engineering Sciences of High Performance Fluids and Solids (Formally D02.1100)

    DesignationTitle
    D2717 - 95(2009) Standard Test Method for Thermal Conductivity of Liquids
    D2766 - 95(2009) Standard Test Method for Specific Heat of Liquids and Solids
    D2878 - 10 Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils
    D2879 - 10 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
    D2883 - 95(2009) Standard Test Method for Reaction Threshold Temperature of Liquid and Solid Materials
    D3115 - 95(2009) Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear
    D3711 - 95(2009) Standard Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors
    D3825 - 09 Standard Test Method for Dynamic Surface Tension by the Fast-Bubble Technique
    D4056 - 01(2010) Standard Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants
    D4486 - 10 Standard Test Method for Kinematic Viscosity of Volatile and Reactive Liquids
    D6668 - 01(2010) Standard Test Method for Discrimination Between Flammability Ratings of F = 0 and F = 1
    D6793 - 02(2012) Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus

    Environmental Standards for Lubricants

    DesignationTitle
    D5864 - 11 Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components
    D6006 - 11 Standard Guide for Assessing Biodegradability of Hydraulic Fluids
    D6081 - 98(2009) Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation
    D6139 - 11 Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill Shake Flask
    D6384 - 11 Standard Terminology Relating to Biodegradability and Ecotoxicity of Lubricants
    D6731 - 01(2011) Standard Test Method for Determining the Aerobic, Aquatic Biodegradability of Lubricants or Lubricant Components in a Closed Respirometer
    D7373 - 12 Standard Test Method for Predicting Biodegradability of Lubricants Using a Bio-kinetic Model

    Ethylene

    DesignationTitle
    D2504 - 88(2010) Standard Test Method for Noncondensable Gases in C2 and Lighter Hydrocarbon Products by Gas Chromatography
    D2505 - 88(2010) Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography
    D5234 - 92(2012) Standard Guide for Analysis of Ethylene Product
    D6159 - 97(2012) Standard Test Method for Determination of Hydrocarbon Impurities in Ethylene by Gas Chromatography

    Fire Resistant Fluids

    DesignationTitle
    D5306 - 92(2013) Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids

    Flow Properties

    DesignationTitle
    D97 - 12 Standard Test Method for Pour Point of Petroleum Products
    D341 - 09 Standard Practice for Viscosity-Temperature Charts for Liquid Petroleum Products
    D445 - 14e1 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
    D446 - 12 Standard Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers
    D2161 - 10 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
    D2162 - 14 Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards
    D2270 - 10e1 Standard Practice for Calculating Viscosity Index From Kinematic Viscosity at 40 and 100°C
    D2386 - 06(2012) Standard Test Method for Freezing Point of Aviation Fuels
    D2500 - 11 Standard Test Method for Cloud Point of Petroleum Products
    D2532 - 10 Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants
    D2603 - 01(2013) Standard Test Method for Sonic Shear Stability of Polymer-Containing Oils
    D2983 - 09 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
    D3829 - 14 Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil
    D4539 - 10 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
    D4683 - 13 Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150?°C
    D4684 - 14 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
    D4741 - 13 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
    D5133 - 13 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
    D5275 - 11 Standard Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids
    D5293 - 14 Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between –5°C and –35°C Using Cold-Cranking Simulator
    D5481 - 13 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
    D5621 - 07(2013) Standard Test Method for Sonic Shear Stability of Hydraulic Fluids
    D5771 - 12 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)
    D5772 - 10 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)
    D5773 - 10 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
    D5853 - 11 Standard Test Method for Pour Point of Crude Oils
    D5949 - 14 Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)
    D5950 - 14 Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)
    D5972 - 05(2010) Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
    D5985 - 02(2014) Standard Test Method for Pour Point of Petroleum Products (Rotational Method)
    D6022 - 06(2012) Standard Practice for Calculation of Permanent Shear Stability Index
    D6278 - 12e1 Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus
    D6371 - 05(2010) Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels
    D6616 - 07(2012) Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100°C
    D6749 - 02(2012) Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)
    D6821 - 14 Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer
    D6892 - 03(2014) Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)
    D6895 - 06(2012) Standard Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100°C
    D6896 - 14 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
    D7042 - 14 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
    D7109 - 12 Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus at 30 and 90 Cycles
    D7110 - 05a(2011) Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
    D7152 - 11 Standard Practice for Calculating Viscosity of a Blend of Petroleum Products
    D7153 - 05(2010) Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)
    D7154 - 05(2010) Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)
    D7279 - 14 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
    D7346 - 14 Standard Test Method for No Flow Point and Pour Point of Petroleum Products
    D7397 - 10 Standard Test Method for Cloud Point of Petroleum Products (Miniaturized Optical Method)
    D7483 - 13a Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
    D7683 - 11 Standard Test Method for Cloud Point of Petroleum Products (Small Test Jar Method)
    D7689 - 11 Standard Test Method for Cloud Point of Petroleum Products (Mini Method)

    FTIR Testing Practices and Techniques Related to In-Service Lubricants

    DesignationTitle
    D7624 - 10 Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
    D7844 - 12 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
    D7889 - 13 Standard Test Method for Field Determination of In-Service Fluid Properties Using IR Spectroscopy

    Fuel Cleanliness

    DesignationTitle
    D1094 - 07(2013) Standard Test Method for Water Reaction of Aviation Fuels
    D2276 - 06(2014) Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
    D3240 - 11 Standard Test Method for Undissolved Water In Aviation Turbine Fuels
    D3948 - 13 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
    D5452 - 12 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
    D7224 - 13 Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer
    D7797 - 12 Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy – Rapid Screening Method

    Functional Tests - Contamination

    DesignationTitle
    D1264 - 12 Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases
    D1743 - 13 Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
    D4049 - 06(2011) Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray
    D5969 - 11e1 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments
    D6138 - 13 Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)

    Functional Tests - Temperature

    DesignationTitle
    D1478 - 11 Standard Test Method for Low-Temperature Torque of Ball Bearing Grease
    D3336 - 05(2010) Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures
    D3527 - 11 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease

    Functional Tests - Tribology

    DesignationTitle
    D2266 - 01(2008) Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method)
    D2509 - 03(2008) Standard Test Method for Measurement of Load-Carrying Capacity of Lubricating Grease (Timken Method)
    D2596 - 10e1 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)
    D4170 - 10 Standard Test Method for Fretting Wear Protection by Lubricating Greases

    Gas Chromatography Methods

    DesignationTitle
    D2268 - 93(2013) Standard Test Method for Analysis of High-Purity n-Heptane and Isooctane by Capillary Gas Chromatography
    D2427 - 06(2011) Standard Test Method for Determination of C2 through C5 Hydrocarbons in Gasolines by Gas Chromatography
    D3606 - 10 Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography
    D4291 - 04(2013) Standard Test Method for Trace Ethylene Glycol in Used Engine Oil
    D4626 - 95(2010) Standard Practice for Calculation of Gas Chromatographic Response Factors
    D4815 - 13 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography
    D5134 - 13 Standard Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography
    D5441 - 98(2013) Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography
    D5443 - 04(2009)e1 Standard Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200°C by Multi-Dimensional Gas Chromatography
    D5501 - 12e1 Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography
    D5580 - 13 Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography
    D5599 - 00(2010) Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
    D5623 - 94(2014) Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
    D5986 - 96(2011) Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8-C 12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy
    D6160 - 98(2013) Standard Test Method for Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials by Gas Chromatography
    D6296 - 98(2013) Standard Test Method for Total Olefins in Spark-ignition Engine Fuels by Multidimensional Gas Chromatography
    D6584 - 13e1 Standard Test Method for Determination of Total Monoglycerides, Total Diglycerides, Total Triglycerides, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography
    D6729 - 04(2009) Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Metre Capillary High Resolution Gas Chromatography
    D6730 - 01(2011) Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100–Metre Capillary (with Precolumn) High-Resolution Gas Chromatography
    D6733 - 01(2011) Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography
    D6839 - 13 Standard Test Method for Hydrocarbon Types, Oxygenated Compounds, and Benzene in Spark Ignition Engine Fuels by Gas Chromatography
    D7059 - 09(2013) Standard Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography
    D7576 - 10 Standard Test Method for Determination of Benzene and Total Aromatics in Denatured Fuel Ethanol by Gas Chromatography
    D7753 - 12 Standard Test Method for Hydrocarbon Types and Benzene in Light Petroleum Distillates by Gas Chromatography
    D7754 - 11 Standard Test Method for Determination of Trace Oxygenates in Automotive Spark-Ignition Engine Fuel by Multidimensional Gas Chromatography
    D7900 - 13e1 Standard Test Method for Determination of Light Hydrocarbons in Stabilized Crude Oils by Gas Chromatography

    Gasoline and Gasoline-Oxygenate Blends

    DesignationTitle
    D4814 - 14a Standard Specification for Automotive Spark-Ignition Engine Fuel
    D5500 - 98(2008) Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation
    D5598 - 01(2012) Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling
    D6201 - 04(2009) Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation
    D6421 - 99a(2009) Standard Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure

    Gasoline and Oxygenated Fuels

    DesignationTitle
    D7862 - 13 Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel

    Guidelines for In-Services Lubricants Analysis

    DesignationTitle
    D7669 - 11 Standard Guide for Practical Lubricant Condition Data Trend Analysis
    D7720 - 11 Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination
    D7874 - 13 Standard Guide for Applying Failure Mode and Effect Analysis (FMEA) to In-Service Lubricant Testing

    Heavy Duty Engine Oils

    DesignationTitle
    D5966 - 13 Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine
    D5967 - 13 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
    D5968 - 14 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121°C
    D6594 - 14 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135°C
    D6618 - 14 Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine
    D6681 - 14 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure
    D6750 - 14 Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure(0.4?% Fuel Sulfur) and 1N Procedure(0.04?% Fuel Sulfur)
    D6838 - 04(2010) Standard Test Method for Cummins M11 High Soot Test
    D6894 - 13 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine

    Hydraulic Fluids

    DesignationTitle
    D2155 - 12 Standard Test Method for Determination of Fire Resistance of Aircraft Hydraulic Fluids by Autoignition Temperature
    D6046 - 02(2012) Standard Classification of Hydraulic Fluids for Environmental Impact
    D6158 - 10 Standard Specification for Mineral Hydraulic Oils
    D6351 - 10 Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids
    D6547 - 00(2010) Standard Test Method for Corrosiveness of Lubricating Fluid to Bimetallic Couple
    D7044 - 04a(2010) Standard Specification for Biodegradable Fire Resistant Hydraulic Fluids
    D7721 - 11 Standard Practice for Determining the Effect of Fluid Selection on Hydraulic System or Component Efficiency

    Hydrocarbon Measurement for Custody Transfer (Joint ASTM-API)

    DesignationTitle
    D95 - 13e1 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
    D287 - 12b Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
    D473 - 07(2012) Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method
    D1250 - 08(2013) Standard Guide for Use of the Petroleum Measurement Tables
    D1298 - 12b Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
    D1657 - 12e1 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
    D1744 - 13 Standard Test Method for Determination of Water in Liquid Petroleum Products by Karl Fischer Reagent
    D1796 - 11e1 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
    D4006 - 11(2012)e1 Standard Test Method for Water in Crude Oil by Distillation
    D4007 - 11e1 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
    D4057 - 12 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    D4177 - 95(2010) Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
    D4377 - 00(2011) Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration
    D4807 - 05(2010) Standard Test Method for Sediment in Crude Oil by Membrane Filtration
    D4928 - 12 Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration
    D7829 - 13e1 Standard Guide for Sediment and Water Determination in Crude Oil

    Hydrocarbons for Chemical and Special Uses

    DesignationTitle
    D4178 - 82(2012) Standard Practice for Calibrating Moisture Analyzers

    In-Service Lubricant Testing and Condition Monitoring Services

    DesignationTitle
    D7214 - 07a(2012) Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
    D7412 - 09 Standard Test Method for Condition Monitoring of Phosphate Antiwear Additives in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
    D7414 - 09 Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
    D7415 - 09 Standard Test Method for Condition Monitoring of Sulfate By-Products in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
    D7416 - 09 Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Viscome
    D7417 - 10 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
    D7418 - 12 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
    D7596 - 14 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
    D7686 - 11 Standard Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument
    D7898 - 14 Standard Practice for Lubrication and Hydraulic Filter Debris Analysis (FDA) for Condition Monitoring of Machinery
    E2412 - 10 Standard Practice for Condition Monitoring of Used Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

    In-Service Lubricants Particle Counting Practices and Techniques

    DesignationTitle
    D7647 - 10 Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction

    Industrial Applications

    DesignationTitle
    D3707 - 89(2010) Standard Test Method for Storage Stability of Water-in-Oil Emulsions by the Oven Test Method
    D3709 - 89(2010) Standard Test Method for Stability of Water-in-Oil Emulsions Under Low to Ambient Temperature Cycling Conditions
    D4174 - 89(2010) Standard Practice for Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems
    D4898 - 90(2010)e1 Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis
    D5534 - 94(2011)e1 Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids

    Industrial Lubricants and Engineering Sciences of High Performance Fluids and Solids

    DesignationTitle
    D2510 - 94(2012) Standard Test Method for Adhesion of Solid Film Lubricants
    D2715 - 92(2012) Standard Test Method for Volatilization Rates of Lubricants in Vacuum
    D2779 - 92(2012) Standard Test Method for Estimation of Solubility of Gases in Petroleum Liquids
    D2884 - 93(2012) Standard Test Method for Yield Stress of Heterogeneous Propellants by Cone Penetration Method
    D3342 - 90(2012) Standard Test Method for Dispersion Stability of New (Unused) Rolling Oil Dispersions in Water
    D3429 - 93(2012) Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids
    D3523 - 92(2012) Standard Test Method for Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test)
    D3704 - 96(2012) Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion
    D3705 - 86(2009) Standard Test Method for Misting Properties of Lubricating Fluids
    D3827 - 92(2012) Standard Test Method for Estimation of Solubility of Gases in Petroleum and Other Organic Liquids
    D6425 - 11 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine
    D6743 - 11 Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids
    D7217 - 11 Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
    D7421 - 11 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Linear-Oscillation (SRV) Test Machine
    D7755 - 11 Standard Practice for Determining the Wear Volume on Standard Test Pieces Used by High-Frequency, Linear-Oscillation (SRV) Test Machine

    Integrated Testers, Instrumentation Techniques for In-Service Lubricants

    DesignationTitle
    D7685 - 11 Standard Practice for In-Line, Full Flow, Inductive Sensor for Ferromagnetic and Non-ferromagnetic Wear Debris Determination and Diagnostics for Aero-Derivative and Aircraft Gas Turbine Engine Bearings

    J2 Spark and Compression Ignition Aviation Engine Fuels

    DesignationTitle
    D6227 - 14 Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component
    D7547 - 14a Standard Specification for Hydrocarbon Unleaded Aviation Gasoline
    D7592 - 14 Standard Specification for Specification for Grade 94 Unleaded Aviation Gasoline Certification and Test Fuel
    D7796 - 12 Standard Test Method for Analysis of Ethyl tert-Butyl Ether (ETBE) by Gas Chromatography
    D7826 - 13 Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives

    Jet Fuel Specifications

    DesignationTitle
    D1655 - 14 Standard Specification for Aviation Turbine Fuels
    D6424 - 04a(2010) Standard Practice for Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines
    D6615 - 14a Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
    D6824 - 13e1 Standard Test Method for Determining Filterability of Aviation Turbine Fuel
    D7872 - 13 Standard Test Method for Determining the Concentration of Pipeline Drag Reducer Additive in Aviation Turbine Fuels

    Liquefied Petroleum Gas

    DesignationTitle
    D1265 - 11 Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method
    D1267 - 12 Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method)
    D1835 - 13 Standard Specification for Liquefied Petroleum (LP) Gases
    D1837 - 11 Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases
    D1838 - 14 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
    D2158 - 11 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases
    D2420 - 13 Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)
    D2421 - 13 Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis
    D2597 - 10 Standard Test Method for Analysis of Demethanized Hydrocarbon Liquid Mixtures Containing Nitrogen and Carbon Dioxide by Gas Chromatography
    D2598 - 12 Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis
    D2713 - 13 Standard Test Method for Dryness of Propane (Valve Freeze Method)
    D3700 - 14 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
    D5305 - 12 Standard Test Method for Determination of Ethyl Mercaptan in LP-Gas Vapor
    D7756 - 13 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection
    D7828 - 12 Standard Test Method for Determination of Residue Composition in Liquefied Petroleum Gas (LPG) Using Automated Thermal Desorption/Gas Chromatography (ATD/GC)
    D7901 - 14a Standard Specification for Dimethyl Ether for Fuel Purposes

    Liquid Chromatography

    DesignationTitle
    D1319 - 13 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    D2001 - 07(2012) Standard Test Method for Depentanization of Gasoline and Naphthas
    D2007 - 11 Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method
    D2549 - 02(2012) Standard Test Method for Separation of Representative Aromatics and Nonaromatics Fractions of High-Boiling Oils by Elution Chromatography
    D3712 - 05(2011) Standard Test Method of Analysis of Oil-Soluble Petroleum Sulfonates by Liquid Chromatography
    D5186 - 03(2009) Standard Test Method for Determination of Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography
    D6379 - 11 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection
    D6550 - 10 Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography
    D6591 - 11 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Middle Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection
    D7347 - 07e1 Standard Test Method for Determination of Olefin Content in Denatured Ethanol by Supercritical Fluid Chromatography
    D7419 - 13 Standard Test Method for Determination of Total Aromatics and Total Saturates in Lube Basestocks by High Performance Liquid Chromatography (HPLC) with Refractive Index Detection
    D7524 - 10 Standard Test Method for Determination of Static Dissipater Additives (SDA) in Aviation Turbine Fuel and Middle Distillate Fuels—High Performance Liquid Chromatograph (HPLC) Method
    D7591 - 12 Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography

    Lubricating Grease

    DesignationTitle
    D4290 - 07(2012) Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions
    D4693 - 07(2012) Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings
    D5706 - 11 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
    D5707 - 11 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
    D7420 - 11 Standard Test Method for Determining Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
    D7594 - 11 Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
    D7718 - 11 Standard Practice for Obtaining In-Service Samples of Lubricating Grease

    Lubricating Properties

    DesignationTitle
    D6813 - 02a(2013) Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps
    D6973 - 14 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
    D7043 - 12 Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump

    Manufactured Carbon and Graphite Products

    DesignationTitle
    C559 - 90(2010) Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles
    C560 - 88(2010)e1 Standard Test Methods for Chemical Analysis of Graphite
    C561 - 91(2010)e1 Standard Test Method for Ash in a Graphite Sample
    C562 - 91(2010)e1 Standard Test Method for Moisture in a Graphite Sample
    C565 - 93(2010)e1 Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials
    C611 - 98(2010)e1 Standard Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature
    C625 - 95(2010) Standard Practice for Reporting Irradiation Results on Graphite
    C651 - 13 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
    C662 - 70(2010) Standard Specification for Impervious Graphite Pipe and Threading
    C695 - 91(2010) Standard Test Method for Compressive Strength of Carbon and Graphite
    C709 - 09 Standard Terminology Relating to Manufactured Carbon and Graphite
    C714 - 05(2010) Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method
    C747 - 93(2010)e1 Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
    C748 - 98(2010)e1 Standard Test Method for Rockwell Hardness of Graphite Materials
    C749 - 13 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
    C769 - 09 Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining Young's Modulus
    C781 - 08(2014) Standard Practice for Testing Graphite and Boronated Graphite Materials for High-Temperature Gas-Cooled Nuclear Reactor Components
    C783 - 85(2010)e1 Standard Practice for Core Sampling of Graphite Electrodes
    C808 - 75(2010)e1 Standard Guideline for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials
    C816 - 85(2010)e1 Standard Test Method for Sulfur in Graphite by Combustion-Iodometric Titration Method
    C838 - 96(2010)e1 Standard Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes
    C886 - 98(2010)e1 Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials
    C1025 - 91(2010)e1 Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
    C1039 - 85(2010)e1 Standard Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes
    C1179 - 91(2010)e1 Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
    D7219 - 08(2014) Standard Specification for Isotropic and Near-isotropic Nuclear Graphites
    D7301 - 11 Standard Specification for Nuclear Graphite Suitable for Components Subjected to Low Neutron Irradiation Dose
    D7542 - 09 Standard Test Method for Air Oxidation of Carbon and Graphite in the Kinetic Regime
    D7775 - 11e1 Standard Guide for Measurements on Small Graphite Specimens
    D7779 - 11 Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature
    D7846 - 12 Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Graphites

    Mass Spectroscopy

    DesignationTitle
    D2425 - 04(2009) Standard Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry
    D2650 - 10 Standard Test Method for Chemical Composition of Gases By Mass Spectrometry
    D2786 - 91(2011) Standard Test Method for Hydrocarbon Types Analysis of Gas-Oil Saturates Fractions by High Ionizing Voltage Mass Spectrometry
    D2789 - 95(2011) Standard Test Method for Hydrocarbon Types in Low Olefinic Gasoline by Mass Spectrometry
    D3239 - 91(2011) Standard Test Method for Aromatic Types Analysis of Gas-Oil Aromatic Fractions by High Ionizing Voltage Mass Spectrometry
    D5769 - 10 Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry
    D7845 - 13 Standard Test Method for Determination of Chemical Species in Marine Fuel Oil by Multidimensional Gas Chromatography – Mass Spectrometry

    Metal Deformation Fluids and Lubricants

    DesignationTitle
    D2881 - 12(2014) Standard Classification for Metalworking Fluids and Related Materials
    D4042 - 93(2014) Standard Test Method for Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils

    Metal Removal Fluids and Lubricants

    DesignationTitle
    D1662 - 08(2014) Standard Test Method for Active Sulfur in Cutting Oils
    D2711 - 11 Standard Test Method for Demulsibility Characteristics of Lubricating Oils
    D4627 - 12 Standard Test Method for Iron Chip Corrosion for Water–Miscible Metalworking Fluids
    D5619 - 00(2011) Standard Test Method for Comparing Metal Removal Fluids Using the Tapping Torque Test Machine
    D6203 - 06(2012) Standard Test Method for Thermal Stability of Way Lubricants
    D6553 - 00(2010) Standard Test Method for Coolant Compatibility of Way Lubricants

    Non-Lubricating Process Fluids

    DesignationTitle
    D5372 - 04(2014) Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids
    D6200 - 01(2012) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
    D6482 - 06(2011) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
    D6549 - 06(2011) Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
    D6666 - 04(2014) Standard Guide for Evaluation of Aqueous Polymer Quenchants
    D6710 - 02(2012) Standard Guide for Evaluation of Hydrocarbon-Based Quench Oil
    D7646 - 10 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
    D7665 - 10 Standard Guide for Evaluation of Biodegradable Heat Transfer Fluids
    D7863 - 13 Standard Guide for Evaluation of Convective Heat Transfer Coefficient of Liquids

    Oxidation of Greases

    DesignationTitle
    D942 - 02(2007) Standard Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Pressure Vessel Method
    D5483 - 05(2010) Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry

    Oxidation of Lubricants

    DesignationTitle
    D4871 - 11 Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus
    D5763 - 11 Standard Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware

    Oxidation of Lubricants

    DesignationTitle
    D2893 - 04(2014)e1 Standard Test Method for Oxidation Characteristics of Extreme-Pressure Lubrication Oils
    D4636 - 14 Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils
    D5846 - 07(2012) Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus
    D6186 - 08(2013) Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)

    Oxidation of Turbine Oils

    DesignationTitle
    D943 - 04a(2010)e1 Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils
    D2272 - 14 Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
    D4310 - 10 Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils
    D6514 - 03(2008) Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils
    D6810 - 13 Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry
    D6971 - 09(2014) Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry
    D7590 - 09(2014) Standard Guide for Measurement of Remaining Primary Antioxidant Content In In-Service Industrial Lubricating Oils by Linear Sweep Voltammetry
    D7873 - 13e1 Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120°C Without the Inclusion of Water (Dry TOST Method)

    Oxidation Testing of Engine Oils

    DesignationTitle
    D4742 - 08e1 Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)
    D6335 - 09 Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test
    D7097 - 09 Standard Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test-TEOST MHT
    D7098 - 08e1 Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B

    Oxygenated Fuels and Components

    DesignationTitle
    D4806 - 14 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
    D5797 - 13 Standard Specification for Fuel Methanol (M70-M85) for Automotive Spark-Ignition Engines
    D5798 - 14 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
    D5983 - 13 Standard Specification for Methyl Tertiary-Butyl Ether (MTBE) for Downstream Blending for Use in Automotive Spark-Ignition Engine Fuel
    D6423 - 08 Standard Test Method for Determination of pHe of Ethanol, Denatured Fuel Ethanol, and Fuel Ethanol (Ed75-Ed85)
    D7794 - 12 Standard Practice for Blending Mid-Level Ethanol Fuel Blends for Flexible-Fuel Vehicles with Automotive Spark-Ignition Engines

    Passenger Car Engine Oils

    DesignationTitle
    D6557 - 13 Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils
    D6593 - 14 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
    D6709 - 14 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)
    D6837 - 13 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIB Spark Ignition Engine
    D6984 - 14 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine
    D7320 - 13 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine
    D7603 - 13 Standard Test Method for Determination of Storage Stability and Compatibility in Automotive Gear Oils

    Performance Assessment and Validation of Process Stream Analyzer Systems

    DesignationTitle
    D3764 - 13 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
    D6122 - 13 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
    D6624 - 12 Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data
    D7235 - 10 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
    D7278 - 11 Standard Guide for Prediction of Analyzer Sample System Lag Times
    D7453 - 09 Standard Practice for Sampling of Petroleum Products for Analysis by Process Stream Analyzers and for Process Stream Analyzer System Validation
    D7808 - 12 Standard Practice for Determining the Site Precision of a Process Stream Analyzer on Process Stream Material
    D7825 - 12 Standard Guide for Generating a Process Stream Property Value through the Application of a Process Stream Analyzer

    Physical and Chemical Methods

    DesignationTitle
    D611 - 12 Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents
    D1015 - 05(2010) Standard Test Method for Freezing Points of High-Purity Hydrocarbons
    D1016 - 05(2010) Standard Test Method for Purity of Hydrocarbons from Freezing Points
    D1159 - 07(2012) Standard Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration
    D1217 - 12 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
    D1218 - 12 Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids
    D1480 - 12 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
    D1481 - 12 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
    D1747 - 09(2014) Standard Test Method for Refractive Index of Viscous Materials
    D2503 - 92(2012) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
    D2710 - 09(2013) Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration
    D4052 - 11 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
    D5002 - 13 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
    D7777 - 13 Standard Test Method for Density, Relative Density, or API Gravity of Liquid Petroleum by Portable Digital Density Meter

    Physical Tests

    DesignationTitle
    D566 - 02(2009) Standard Test Method for Dropping Point of Lubricating Grease
    D972 - 02(2008) Standard Test Method for Evaporation Loss of Lubricating Greases and Oils
    D1742 - 06(2013) Standard Test Method for Oil Separation from Lubricating Grease During Storage
    D2265 - 06 Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range
    D2595 - 96(2008)e1 Standard Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range
    D4425 - 09 Standard Test Method for Oil Separation From Lubricating Grease by Centrifuging (Koppers Method)

    Physical/Chemical Properties

    DesignationTitle
    D87 - 09(2014) Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
    D127 - 08 Standard Test Method for Drop Melting Point of Petroleum Wax, Including Petrolatum
    D612 - 88(2012) Standard Test Method for Carbonizable Substances in Paraffin Wax
    D721 - 06(2011) Standard Test Method for Oil Content of Petroleum Waxes
    D937 - 07(2012) Standard Test Method for Cone Penetration of Petrolatum
    D938 - 12 Standard Test Method for Congealing Point of Petroleum Waxes, Including Petrolatum
    D1321 - 10 Standard Test Method for Needle Penetration of Petroleum Waxes
    D1465 - 10 Standard Test Method for Blocking and Picking Points of Petroleum Wax
    D1833 - 87(2012) Standard Test Method for Odor of Petroleum Wax
    D2423 - 90(2012)e1 Standard Test Method for Surface Wax on Waxed Paper or Paperboard
    D2534 - 88(2012) Standard Test Method for Coefficient of Kinetic Friction for Wax Coatings
    D2669 - 06(2012)e1 Standard Test Method for Apparent Viscosity of Petroleum Waxes Compounded with Additives (Hot Melts)
    D3235 - 06(2011) Standard Test Method for Solvent Extractables in Petroleum Waxes
    D3236 - 88(2014) Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials
    D3344 - 90(2010) Standard Test Method for Total Wax Content of Corrugated Paperboard
    D3521 - 86(2012) Standard Test Method for Surface Wax Coating On Corrugated Board
    D3708 - 88(2010) Standard Test Method for Weight of Wax Applied During Curtain Coating Operation
    D3944 - 12 Standard Test Method for Solidification Point of Petroleum Wax
    D4419 - 90(2010) Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)

    Practices and Techniques for Prediction and Determination of Microscopic Wear and Wear-related Properties

    DesignationTitle
    D7670 - 10 Standard Practice for Processing In-service Fluid Samples for Particulate Contamination Analysis Using Membrane Filters
    D7684 - 11 Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants
    D7690 - 11 Standard Practice for Microscopic Characterization of Particles from In-Service Lubricants by Analytical Ferrography
    D7919 - 14 Standard Guide for Filter Debris Analysis (FDA) Using Manual or Automated Processes

    Preparation of Standard Hydrocarbon Blends

    DesignationTitle
    D4051 - 10 Standard Practice for Preparation of Low-Pressure Gas Blends
    D4307 - 99(2010) Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
    D6596 - 00(2011) Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials
    D7717 - 11 Standard Practice for Preparing Volumetric Blends of Denatured Fuel Ethanol and Gasoline Blendstocks for Laboratory Analysis

    Properties of Fuels, Petroleum Coke and Carbon Material

    DesignationTitle
    D61 - 75(2010) Standard Test Method for Softening Point of Pitches (Cube-in-Water Method)
    D71 - 94(2009) Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)
    D130 - 12 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
    D156 - 12 Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)
    D240 - 09 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
    D1405 / D1405M - 08(2013) Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
    D1500 - 12 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
    D2318 - 14 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch
    D2319 / D2319M - 14 Standard Test Method for Softening Point of Pitch (Cube-in-Air Method)
    D2320 - 98(2012) Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
    D2392 - 96(2011) Standard Test Method for Color Of Dyed Aviation Gasolines
    D2415 - 98(2012) Standard Test Method for Ash in Coal Tar and Pitch
    D2416 - 84(2009) Standard Test Method for Coking Value of Tar and Pitch (Modified Conradson)
    D2638 - 10 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
    D2764 - 99(2009) Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch
    D3104 - 14 Standard Test Method for Softening Point of Pitches (Mettler Softening Point Method)
    D3338 / D3338M - 09(2014)e1 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
    D3461 - 97(2012) Standard Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method)
    D3703 - 13 Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels, Gasoline and Diesel Fuels
    D4072 - 98(2013) Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch
    D4292 - 10 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke
    D4296 - 83(2009) Standard Practice for Sampling Pitch
    D4312 - 95a(2010) Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)
    D4422 - 13 Standard Test Method for Ash in Analysis of Petroleum Coke
    D4529 - 01(2011) Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
    D4616 - 95(2013) Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch
    D4715 - 98(2012) Standard Test Method for Coking Value of Tar and Pitch (Alcan)
    D4746 - 14 Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration
    D4809 - 13 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
    D4868 - 00(2010) Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels
    D4892 - 14 Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)
    D4893 - 94(2009) Standard Test Method for Determination of Pitch Volatility
    D4930 - 06(2011) Standard Test Method for Dust Control Material on Calcined Petroleum Coke
    D4931 - 06(2011) Standard Test Method for Gross Moisture in Green Petroleum Coke
    D5003 - 06a(2011) Standard Test Method for Hardgrove Grindability Index (HGI) of Petroleum Coke
    D5004 - 11 Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
    D5018 - 89(2009) Standard Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches
    D5187 - 10 Standard Test Method for Determination of Crystallite Size (Lc of Calcined Petroleum Coke by X-Ray Diffraction
    D5502 - 00(2010) Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry
    D5709 - 09 Standard Test Method for Sieve Analysis of Petroleum Coke
    D6045 - 12 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method
    D6120 - 97(2012) Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature
    D6258 - 09(2014) Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
    D6353 - 06(2011) Standard Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum Production
    D6354 - 12 Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production
    D6374 - 12 Standard Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure
    D6376 - 10 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-Ray Fluorescence Spectroscopy
    D6447 - 09(2014) Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis
    D6558 - 00a(2010) Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks
    D6559 - 00a(2010) Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks
    D6744 - 06(2011)e1 Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
    D6745 - 11 Standard Test Method for Linear Thermal Expansion of Electrode Carbons
    D6756 - 10 Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
    D6791 - 11 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke
    D6969 - 03(2008) Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis
    D6970 - 03(2013)e1 Standard Practice for Collection of Calcined Petroleum Coke Samples for Analysis
    D7058 - 04(2014) Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer
    D7095 - 04(2014) Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip
    D7280 - 06(2011) Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch by Stainless Steel Crucible Filtration
    D7454 - 14e1 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus

    Propylene

    DesignationTitle
    D2163 - 14e1 Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography
    D2712 - 91(2010) Standard Test Method for Hydrocarbon Traces in Propylene Concentrates By Gas Chromatography
    D4864 - 14 Standard Test Method for Determination of Traces of Methanol in Propylene Concentrates by Gas Chromatography
    D5273 - 92(2012) Standard Guide for Analysis of Propylene Concentrates
    D5303 - 92(2012) Standard Test Method for Trace Carbonyl Sulfide in Propylene by Gas Chromatography

    Recycled Products

    DesignationTitle
    D6074 - 08 Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils
    D6448 - 09 Standard Specification for Industrial Burner Fuels from Used Lubricating Oils
    D6823 - 08(2013) Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils
    D7666 - 12 Standard Specification for Triglyceride Burner Fuel

    Research Techniques

    DesignationTitle
    D7342 - 07 Standard Test Method for Shear Stability of Lubricating Grease in Presence of Water (Water Stability Test)
    D7527 - 10 Standard Test Method for Measurement of Antioxidant Content in Lubricating Greases by Linear Sweep Voltammetry

    Sampling (API MPMS Chapter 8.0)

    DesignationTitle
    D5842 - 14 Standard Practice for Sampling and Handling of Fuels for Volatility Measurement
    D5854 - 96(2010) Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products

    Sediment and Water (API MPMS Chapter 10.0)

    DesignationTitle
    D6304 - 07 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration

    Solid Lubricants

    DesignationTitle
    D2511 - 93(2014) Standard Test Method for Thermal Shock Sensitivity of Solid Film Lubricants
    D2625 - 94(2010) Standard Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method)
    D2649 - 04(2014) Standard Test Method for Corrosion Characteristics of Solid Film Lubricants
    D2714 - 94(2014) Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine
    D2981 - 94(2014) Standard Test Method for Wear Life of Solid Film Lubricants in Oscillating Motion
    D3702 - 94(2014) Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine

    Specifications

    DesignationTitle
    D6080 - 12a Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids

    Stability and Cleanliness of Liquid Fuels

    DesignationTitle
    D381 - 12 Standard Test Method for Gum Content in Fuels by Jet Evaporation
    D525 - 12a Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method)
    D873 - 12 Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method)
    D2068 - 14 Standard Test Method for Determining Filter Blocking Tendency
    D2274 - 10 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
    D2709 - 96(2011)e1 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
    D4176 - 04(2009) Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
    D4625 - 04(2009) Standard Test Method for Distillate Fuel Storage Stability at 43°C (110°F)
    D4740 - 04(2014) Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test
    D4860 - 13 Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating)
    D4870 - 09 Standard Test Method for Determination of Total Sediment in Residual Fuels
    D5304 - 11 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure
    D5705 - 14 Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils
    D6021 - 12 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection
    D6217 - 11 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
    D6426 - 13 Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils
    D6468 - 08(2013) Standard Test Method for High Temperature Stability of Middle Distillate Fuels
    D6469 - 12 Standard Guide for Microbial Contamination in Fuels and Fuel Systems
    D6560 - 12 Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products
    D6748 - 02a(2012) Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer)
    D6974 - 09(2013)e1 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures
    D7060 - 12 Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)
    D7061 - 12 Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device
    D7112 - 12 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
    D7157 - 12 Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (n-Heptane Phase Separation; Optical Detection)
    D7261 - 13 Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer
    D7321 - 14 Standard Test Method for Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration
    D7451 - 08a(2013) Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark Ignition Fuels
    D7462 - 11 Standard Test Method for Oxidation Stability of Biodiesel (B100) and Blends of Biodiesel with Middle Distillate Petroleum Fuel (Accelerated Method)
    D7463 - 14a Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water
    D7464 - 08(2013) Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing
    D7501 - 12a Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT)
    D7525 - 09 Standard Test Method for Oxidation Stability of Spark Ignition Fuel—Rapid Small Scale Oxidation Test (RSSOT)
    D7545 - 14 Standard Test Method for Oxidation Stability of Middle Distillate Fuels—Rapid Small Scale Oxidation Test (RSSOT)
    D7548 - 09 Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products
    D7577 - 12 Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends
    D7619 - 12b Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
    D7621 - 14 Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
    D7687 - 11 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel, Fuel/Water Mixtures, and Fuel-Associated Water with Sample Concentration by Filtration
    D7827 - 12 Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene from Heavy Fuel Oils as Separability Number by an Optical Device
    D7847 - 12 Standard Guide for Interlaboratory Studies for Microbiological Test Methods

    Standards Acceleration

    DesignationTitle
    D7589 - 14 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine

    Task Group A: Quality Assurance and Quality Control

    DesignationTitle
    D7776 - 12 Standard Guide for Self-Assessment of Quality System Practices in Petroleum Products and Lubricant Testing Laboratories
    D7778 - 12 Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method

    Temperature Determination (API MPMS Chapter 7.0)

    DesignationTitle
    D1550 - 94(2009) Standard ASTM Butadiene Measurement Tables
    D2962 - 10 Standard Practice for Calculating Volume-Temperature Correction For Coal-Tar Pitches

    Terminology

    DesignationTitle
    D4175 - 09ae4 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants

    Test Equipment, Procedures, and Instrumentation

    DesignationTitle
    D7668 - 14a Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method

    Thermal Stability

    DesignationTitle
    D2070 - 91(2010) Standard Test Method for Thermal Stability of Hydraulic Oils
    D2619 - 09 Standard Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)

    Tribiological Properties of Industrial Fluids and Lubricates

    DesignationTitle
    D2422 - 97(2013) Standard Classification of Industrial Fluid Lubricants by Viscosity System
    D2670 - 95(2010) Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method)
    D2782 - 02(2014) Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method)
    D2783 - 03(2009)e1 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)
    D3233 - 93(2009)e1 Standard Test Methods for Measurement of Extreme Pressure Properties of Fluid Lubricants (Falex Pin and Vee Block Methods)
    D4172 - 94(2010) Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method)
    D5182 - 97(2014) Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)
    D5183 - 05(2011) Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine

    Turbine Oil Monitoring, Problems and Systems

    DesignationTitle
    D4293 - 83(2008) Standard Specification for Phosphate Ester Based Fluids for Turbine Lubrication
    D4304 - 13 Standard Specification for Mineral and Synthetic Lubricating Oil Used in Steam or Gas Turbines
    D4378 - 13 Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines
    D6224 - 09 Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment
    D6439 - 11 Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems

    Turbine Oils

    DesignationTitle
    D7155 - 11 Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils
    D7843 - 12 Standard Test Method for Measurement of Lubricant Generated Insoluble Color Bodies in In-Service Turbine Oils using Membrane Patch Colorimetry

    Two-Stroke Cycle Gasoline

    DesignationTitle
    D4682 - 13 Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants
    D4857 - 12 Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards
    D4858 - 13 Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines
    D4859 - 13 Standard Specification for Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines-TC
    D4863 - 13 Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants

    Volatility

    DesignationTitle
    D56 - 05(2010) Standard Test Method for Flash Point by Tag Closed Cup Tester
    D86 - 12 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
    D92 - 12b Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
    D93 - 13e1 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
    D323 - 08(2014) Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
    D1160 - 13 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
    D2892 - 13 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
    D3828 - 12a Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
    D4953 - 06(2012) Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)
    D5188 - 14 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber and Piston Based Method)
    D5191 - 13 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
    D5236 - 13 Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)
    D5482 - 07(2013) Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method—Atmospheric)
    D6377 - 10 Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx (Expansion Method)
    D6378 - 10 Standard Test Method for Determination of Vapor Pressure (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)
    D6450 - 12e1 Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
    D6849 - 13 Standard Practice for Storage and Use of Liquefied Petroleum Gases (LPG) in Sample Cylinders for LPG Test Methods
    D6897 - 09 Standard Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)
    D7094 - 12e1 Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
    D7236 - 07(2013) Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)
    D7344 - 11a Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Mini Method)
    D7345 - 08 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Micro Distillation Method

    Other standards developed by ASTM committees:


    3D Imaging Standards

    Additive Manufacturing Standards

    Adhesive Standards

    Aerospace Material Standards

    Analytical Chemistry Standards

    Asset Management Standards

    Atmospheric Analysis Standards

    Biotechnology Standards

    Construction Standards

    Business Copy Product Standards

    Carbon Standards

    Catalyst Standards

    Cement Standards and Concrete Standards

    Coal Standards and Gas Standards

    Composite Standards

    Computerized System Standards

    Consumer Product Evaluation Standards

    Copper Standards

    Corrosion Standards and Wear Standards

    Durability of Nonmetallic Material Standards

    Electrical Insulating Material Standards

    Electrical Standards and Magnetic Conductor Standards

    Electronics Standards

    Environmental Standards

    Fastener Standards

    Fatigue Standards and Fracture Standards

    Fire Standards and Flammability Standards

    Forensic Science Standards

    Geotechnical Engineering Standards

    Glass Standards and Ceramic Standards

    Industrial Chemical Standards

    Industrial Hygiene Standards and Safety Standards

    Laboratory Testing Standards

    Leather Standards

    Masonry Standards

    Medical Device Standards and Implant Standards