Building Standards

    ASTM's building standards are instrumental in specifying, evaluating, and testing the dimensional, mechanical, rheological, and other performance requirements of the materials used in the manufacture of main and auxiliary building parts and components. These materials include construction sealants, structural members, insulation systems, and other facilities used in conjunction with the erection of the foundation, walls, roofs, ceilings, doors, and windows of both commercial and domestic building structures. These building standards are helpful in guiding manufacturers, construction companies, architectural firms, and other users of such parts and components in their proper fabrication and installation procedures, as well as the possible hazards involved during these processes.

    List of building standards developed by ASTM:


    Jump to:

    Adhesion

    DesignationTitle
    C719 - 14 Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
    C736 - 12 Standard Test Method for Extension-Recovery and Adhesion of Latex Sealants
    C794 - 10 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
    C907 - 03(2012) Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
    C908 - 00(2011) Standard Test Method for Yield Strength of Preformed Tape Sealants
    C910 - 06(2011) Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
    C961 - 06(2011) Standard Test Method for Lap Shear Strength of Sealants
    C1135 - 00(2011) Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
    C1216 / C1216M - 13 Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants
    C1247 - 14 Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids
    C1265 - 94(2011) Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications
    C1367 - 06(2012) Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures
    C1382 - 11 Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
    C1521 - 13 Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints
    C1523 - 10 Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
    C1635 - 06 Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension
    C1736 - 11 Standard Practice for Non-Destructive Evaluation of Adhesion of Installed Weatherproofing Sealant Joints Using a Rolling Device

    Aerosol Foam Sealants

    DesignationTitle
    C1536 - 10 Standard Test Method for Measuring the Yield for Aerosol Foam Sealants
    C1620 - 12 Standard Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants
    C1642 - 07 Standard Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials
    C1643 - 14 Standard Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants
    C1737 - 10 Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing

    Air Leakage and Ventilation Performance

    DesignationTitle
    E241 - 09(2014)e1 Standard Guide for Limiting Water-Induced Damage to Buildings
    E741 - 11 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
    E779 - 10 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization
    E1186 - 03(2009) Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems
    E1258 - 88(2012) Standard Test Method for Airflow Calibration of Fan Pressurization Devices
    E1465 - 08a Standard Practice for Radon Control Options for the Design and Construction of New Low-Rise Residential Buildings
    E1554 / E1554M - 13 Standard Test Methods for Determining Air Leakage of Air Distribution Systems by Fan Pressurization
    E1677 - 11 Standard Specification for Air Barrier (AB) Material or System for Low-Rise Framed Building Walls
    E1827 - 11 Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
    E1998 - 11 Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances
    E2029 - 11 Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
    E2121 - 13 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings
    E2178 - 13 Standard Test Method for Air Permeance of Building Materials
    E2342 - 10 Standard Test Method for Durability Testing of Duct Sealants
    E2357 - 11 Standard Test Method for Determining Air Leakage of Air Barrier Assemblies

    Application of Acoustical Materials and Systems

    DesignationTitle
    C367 / C367M - 09 Standard Test Methods for Strength Properties of Prefabricated Architectural Acoustical Tile or Lay-In Ceiling Panels
    C635 / C635M - 13a Standard Specification for the Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings
    C636 / C636M - 13 Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels
    E557 - 12 Standard Guide for Architectural Design and Installation Practices for Sound Isolation between Spaces Separated by Operable Partitions
    E580 / E580M - 14 Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions
    E1042 - 02(2014) Standard Classification for Acoustically Absorptive Materials Applied by Trowel or Spray
    E1264 - 08e1 Standard Classification for Acoustical Ceiling Products

    Building Economics

    DesignationTitle
    E833 - 14 Standard Terminology of Building Economics
    E917 - 13 Standard Practice for Measuring Life-Cycle Costs of Buildings and Building Systems
    E964 - 06(2010) Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems
    E1057 - 06(2010) Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems
    E1074 - 09 Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems
    E1121 - 12 Standard Practice for Measuring Payback for Investments in Buildings and Building Systems
    E1185 - 12 Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems
    E1369 - 11 Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems
    E1557 - 09 Standard Classification for Building Elements and Related Sitework-UNIFORMAT II
    E1699 - 14 Standard Practice for Performing Value Engineering (VE)/Value Analysis (VA) of Projects, Products and Processes
    E1765 - 11 Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Buildings and Building Systems
    E1804 - 12 Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project
    E1946 - 12 Standard Practice for Measuring Cost Risk of Buildings and Building Systems and Other Constructed Projects
    E2013 - 12 Standard Practice for Constructing FAST Diagrams and Performing Function Analysis During Value Analysis Study
    E2083 - 05(2010) Standard Classification for Building Construction Field Requirements, and Office Overhead Profit
    E2103 / E2103M - 13 Standard Classification for Bridge Elements—UNIFORMAT II
    E2150 - 13 Standard Classification for Life-Cycle Environmental Work Elements—Environmental Cost Element Structure
    E2166 - 12 Standard Practice for Organizing and Managing Building Data
    E2168 - 10 Standard Classification for Allowance, Contingency and Reserve Sums in Building Construction Estimating
    E2204 - 11a Standard Guide for Summarizing the Economic Impacts of Building-Related Projects
    E2506 - 11 Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities
    E2514 - 08 Standard Practice for Presentation Format of Elemental Cost Estimates, Summaries, and Analyses
    E2516 - 11 Standard Classification for Cost Estimate Classification System
    E2620 - 08 Standard Classification for Program and Project Estimate Summaries
    E2637 - 13 Standard Guide for Utilizing the Environmental Cost Element Structure Presented by Classification E2150
    E2691 - 11 Standard Practice for Job Productivity Measurement

    Building Preservation and Rehabilitation Technology

    DesignationTitle
    E1857 - 97(2013)e1 Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces
    E2167 - 01(2008) Standard Guide for Selection and Use of Stone Consolidants
    E2260 - 03(2012)e1 Standard Guide for Repointing (Tuckpointing) Historic Masonry

    Community Noise

    DesignationTitle
    E1014 - 12 Standard Guide for Measurement of Outdoor A-Weighted Sound Levels
    E1503 - 14 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System
    E1686 - 10 Standard Guide for Applying Environmental Noise Measurement Methods and Criteria
    E1780 - 12 Standard Guide for Measuring Outdoor Sound Received from a Nearby Fixed Source

    Compression Seal and Lock Strip Gaskets

    DesignationTitle
    C509 - 06(2011) Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material
    C542 - 05(2011) Standard Specification for Lock-Strip Gaskets
    C716 - 06(2011) Standard Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials
    C864 - 05(2011) Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers
    C963 - 00(2012) Standard Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets
    C964 - 07(2012) Standard Guide for Lock-Strip Gasket Glazing
    C1083 - 06(2011) Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials
    C1115 - 06(2011) Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories
    C1166 - 06(2011) Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories
    E2203 - 14 Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories

    Definitions and Editorial

    DesignationTitle
    C634 - 13 Standard Terminology Relating to Building and Environmental Acoustics

    Detention Hardware

    DesignationTitle
    F1577 - 05(2012) Standard Test Methods for Detention Locks for Swinging Doors
    F1643 - 05(2012) Standard Test Methods for Detention Sliding Door Locking Device Assembly
    F1758 - 05(2012) Standard Test Methods for Detention Hinges Used on Detention-Grade Swinging Doors
    F2542 - 05(2012) Standard Test Methods for Physical Assault on Ventilation Grilles for Detention and Correctional Facilities

    Durability Performance of Building Constructions

    DesignationTitle
    E546 - 08 Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units
    E576 - 08 Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position
    E2141 - 12 Standard Test Methods for Assessing the Durability of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units
    E2188 - 10 Standard Test Method for Insulating Glass Unit Performance
    E2189 - 10e1 Standard Test Method for Testing Resistance to Fogging in Insulating Glass Units
    E2190 - 10 Standard Specification for Insulating Glass Unit Performance and Evaluation
    E2240 - 06 Standard Test Method for Assessing the Current-Voltage Cycling Stability at 90°C (194°F) of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units
    E2241 - 06 Standard Test Method for Assessing the Current-Voltage Cycling Stability at Room Temperature of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units
    E2269 - 14 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography
    E2354 - 10 Standard Guide for Assessing the Durability of Absorptive Electrochromic Coatings within Sealed Insulating Glass Units
    E2355 - 10 Standard Test Method for Measuring the Uniformity of an Absorptive Electrochromic Coating on a Glazing Surface
    E2649 - 12 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy

    Exterior Insulation and Finish Systems (EIFS)

    DesignationTitle
    E2098 / E2098M - 13 Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution
    E2110 - 11 Standard Terminology for Exterior Insulation and Finish Systems (EIFS)
    E2134 / E2134M - 14 Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS)
    E2273 - 03(2011) Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies
    E2321 - 03(2011) Standard Practice for Use of Test Methods for Determining the Water Vapor Transmission (WVT) of Exterior Insulation and Finish Systems (EIFS)
    E2359 / E2359M - 13 Standard Test Method for Field Pull Testing of an In-Place Exterior Insulation and Finish System Clad Wall Assembly
    E2430 / E2430M - 13 Standard Specification For Expanded Polystyrene (“EPS”) Thermal Insulation Boards For Use In Exterior Insulation and Finish Systems (“EIFS”)
    E2485 / E2485M - 13 Standard Test Method for Freeze/Thaw Resistance of Exterior Insulation and Finish Systems (EIFS) and Water Resistive Barrier Coatings
    E2486 / E2486M - 13 Standard Test Method for Impact Resistance of Class PB and PI Exterior Insulation and Finish Systems (EIFS)
    E2511 - 09 Standard Guide for Detailing of EIFS-Clad Wall Assemblies
    E2568 - 09e1 Standard Specification for PB Exterior Insulation and Finish Systems
    E2570 / E2570M - 07(2014)e1 Standard Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used under Exterior Insulation and Finish Systems (EIFS) or EIFS with Drainage

    Furnishings and Equipment

    DesignationTitle
    F1534 - 10 Standard Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials After Water Leaching
    F1550 - 10 Test Method for Determination of Fire-Test-Response Characteristics of Components or Composites of Mattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism, by Employing a Bench Scale Oxygen Consumption Calorimeter
    F1870 - 11 Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities

    General Test Methods

    DesignationTitle
    C603 - 14 Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
    C639 - 01(2011) Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
    C661 - 06(2011) Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
    C679 - 03(2009)e1 Standard Test Method for Tack-Free Time of Elastomeric Sealants
    C681 - 14 Standard Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds
    C711 - 14 Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
    C712 - 03(2009) Standard Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants
    C731 - 00(2010) Standard Test Method for Extrudability, After Package Aging, of Latex Sealants
    C765 - 97(2011) Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants
    C771 - 14 Standard Test Method for Weight Loss After Heat Aging of Preformed Tape Sealants
    C772 - 03(2014) Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants
    C782 - 13 Standard Test Method for Softness of Preformed Tape Sealants
    C792 - 04(2008) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
    C879 - 03(2014) Standard Test Methods for Release Papers Used with Preformed Tape Sealants
    C972 - 00(2011) Standard Test Method for Compression-Recovery of Tape Sealant
    C1016 - 14 Standard Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material
    C1087 - 00(2011) Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
    C1183 / C1183M - 13 Standard Test Method for Extrusion Rate of Elastomeric Sealants
    C1241 - 14 Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
    C1246 - 00(2012) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
    C1253 - 14 Standard Test Method for Determining the Outgassing Potential of Sealant Backing
    C1266 - 02(2011) Standard Test Method for Flow Characteristics of Preformed Tape Sealants
    C1294 - 07(2011) Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials
    C1681 - 14 Standard Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain
    C1735 - 11 Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation
    D2202 - 00(2010) Standard Test Method for Slump of Sealants
    D2203 - 01(2011) Standard Test Method for Staining from Sealants
    D2377 - 14 Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants
    D2452 - 03(2009) Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds
    D2453 - 03(2009) Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds

    High Rise Building External Evacuation Devices

    DesignationTitle
    E2484 - 08 Standard Specification for Multi-Story Building External Evacuation Controlled Descent Devices
    E2513 - 07(2012) Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems

    Horizontal and Vertical Structures/Structural Performance of Completed Structures

    DesignationTitle
    E72 - 14a Standard Test Methods of Conducting Strength Tests of Panels for Building Construction
    E73 - 13 Standard Practice for Static Load Testing of Truss Assemblies
    E196 - 06(2012) Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs
    E455 - 11 Standard Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings
    E529 - 04(2011) Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction
    E564 - 06(2012) Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings
    E575 - 05(2011) Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies
    E661 - 03(2009) Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads
    E695 - 03(2009) Standard Method for Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading
    E1803 - 14 Standard Test Methods for Determining Strength Capacities of Structural Insulated Panels
    E2126 - 11 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings
    E2127 - 01a(2007) Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction
    E2322 - 03(2009) Standard Test Method for Conducting Traverse and Concentrated Load Tests on Panels used in Floor and Roof Construction

    Lead Hazards Associated with Buildings

    DesignationTitle
    E1605 - 04(2012) Standard Terminology Relating to Lead in Buildings
    E1613 - 12 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
    E1644 - 04(2012)e1 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
    E1645 - 01(2007) Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
    E1726 - 01(2009) Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
    E1728 - 10 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
    E1753 - 13 Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films
    E1775 - 07 Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
    E1792 - 03(2011) Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
    E1795 - 12 Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
    E1796 - 03(2011)e1 Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings
    E1797 - 12 Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
    E1908 - 10 Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)
    E1979 - 12 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
    E2115 - 06 Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities
    E2120 - 10 Standard Practice for Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films
    E2239 - 12 Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities
    E2252 - 12 Standard Practice for Selection of Lead Hazard Reduction Methods for Identified Risks in Residential Housing or Child Occupied Facilities
    E2255 / E2255M - 13 Standard Practice for Conducting Visual Assessments for Lead Hazards in Buildings
    E2271 - 05a(2012)e1 Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Dwellings, and in Other Child-Occupied Facilities
    E2913 - 14 Standard Practice for Hotplate Digestion of Lead from Composited Wipe Samples
    E2914 - 14 Standard Practice for Ultrasonic Extraction of Lead from Composited Wipe Samples

    Materials and Processes for Durable Rigidwall Relocatable Structures

    DesignationTitle
    E864 - 12 Standard Practice for Surface Preparation of Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
    E865 - 12 Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels
    E866 - 11 Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
    E874 - 11 Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels
    E990 - 13 Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Structural Panels
    E1091 - 13 Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels
    E1307 - 10 Standard Practice for Surface Preparation and Structural Adhesive Bonding of Precured, Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels
    E1555 - 12 Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair
    E1556 - 12 Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair
    E1730 - 09 Standard Specification for Rigid Foam for Use in Structural Sandwich Panel Cores
    E1749 - 10 Standard Terminology Relating to Rigid Wall Relocatable Shelters
    E1773 - 10 Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants
    E1793 - 11 Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters
    E1794 - 13 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200°F Elevated Humidity Service), Type II Panels
    E1800 - 13 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160°F Elevated Humidity Service), Type I Panels
    E1801 - 09 Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters
    E1826 - 12 Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded
    E1851 - 09 Standard Test Method for Electromagnetic Shielding Effectiveness of Durable Rigid Wall Relocatable Structures
    E1925 - 10 Specifiction for Engineering and Design Criteria for Rigid Wall Relocatable Structures
    E1974 - 11 Standard Specification for Shelter, Electrical Equipment S-250/G
    E1975 - 09 Standard Specification for Shelter, Electrical, Equipment S-280/G
    E1976 - 11 Standard Specification for Shelter, Tactical, Nonexpandable
    E1977 - 11 Standard Specification for Shelter, Tactical, Expandable, One-Side
    E1978 - 11 Standard Specification for Shelter, Tactical, Expandable, Two-Side
    E2004 - 10 Standard Test Method for Facing Cleavage of Sandwich Panels
    E2377 - 10 Standard Specification for Shelter, Electrical Equipment, Lightweight
    E2462 - 10 Standard Performance Specification for Cargo Bed Cover (CBC) HMMWV, Type I
    E2463 - 11 Standard Performance Specification for Cargo Bed Cover (CBC) M105A2 Trailer, Type II
    E2517 - 13 Standard Specification for Cargo Bed Cover, Type III (M35A2, 2 1/2 Ton Cargo Truck/M1078, 2 1/2 Ton Lightweight Medium Tactical Vehicle (LMTV)/ M1082, 2 1/2 Ton LMTV Trailer)
    E2518 - 11 Standard Specification for Cargo Bed Cover, Type IV (M923, 5 Ton Cargo Truck/M1083, 5 Ton Medium Tactical Vehicle (MTV)/ M1082, 5 Ton MTV Trailer)

    Mechanical and Electrical System Noise

    DesignationTitle
    E477 - 13 Standard Test Method for Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
    E1124 - 10 Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method
    E1222 - 90(2009) Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems
    E1265 - 04(2013) Standard Test Method for Measuring Insertion Loss of Pneumatic Exhaust Silencers
    E1574 - 98(2014) Standard Test Method for Measurement of Sound in Residential Spaces
    E2202 - 02(2009) Standard Practice for Measurement of Equipment-Generated Continuous Noise for Assessment of Health Hazards
    E2459 - 05(2011) Standard Guide for Measurement of In-Duct Sound Pressure Levels from Large Industrial Gas Turbines and Fans

    Performance of Building Enclosures

    DesignationTitle
    E1825 - 06(2012) Standard Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems
    E2099 - 00(2014)e1 Standard Practice for the Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems
    E2128 - 12 Standard Guide for Evaluating Water Leakage of Building Walls
    E2266 - 11 Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion
    E2270 - 13 Standard Practice for Periodic Inspection of Building Facades for Unsafe Conditions
    E2505 - 07(2014) Standard Practice for Industrial Rope Access
    E2556 / E2556M - 10 Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical Attachment
    E2813 - 12 Standard Practice for Building Enclosure Commissioning
    E2841 - 11 Standard Guide for Conducting Inspections of Building Facades for Unsafe Conditions
    E2925 - 14 Standard Specification for Manufactured Polymeric Drainage and Ventilation Materials Used to Provide a Rainscreen Function

    Performance of Metal Roof Systems

    DesignationTitle
    E1514 - 98(2011) Standard Specification for Structural Standing Seam Steel Roof Panel Systems
    E1592 - 05(2012) Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference
    E1637 - 98(2011) Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems
    E1646 - 95(2011) Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference
    E1680 - 11 Standard Test Method for Rate of Air Leakage Through Exterior Metal Roof Panel Systems
    E2140 - 01(2009) Standard Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head

    Performance of Railing Systems and Glass for Floors and Stairs

    DesignationTitle
    E894 - 88(2010) Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings
    E935 - 13e1 Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings
    E985 - 00(2006) Standard Specification for Permanent Metal Railing Systems and Rails for Buildings
    E1481 - 00A(2014)e1 Standard Terminology of Railing Systems and Rails for Buildings
    E2353 - 14 Standard Test Methods for Performance of Glazing in Permanent Railing Systems, Guards, and Balustrades
    E2358 - 04(2010) Standard Specification for the Performance of Glass in Permanent Glass Railing Systems, Guards, and Balustrades
    E2751 / E2751M - 13 Standard Practice for Design and Performance of Supported Laminated Glass Walkways

    Performance of Windows, Doors, Skylights and Curtain Walls

    DesignationTitle
    E283 - 04(2012) Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
    E330 / E330M - 14 Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference
    E331 - 00(2009) Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
    E405 - 04(2012) Standard Test Methods for Wear Testing Rotary Operators for Windows
    E547 - 00(2009) Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference
    E783 - 02(2010) Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors
    E987 - 88(2009) Standard Test Methods for Deglazing Force of Fenestration Products
    E997 - 14 Standard Test Method for Evaluating Glass Breakage Probability Under the Influence of Uniform Static Loads by Proof Load Testing
    E998 - 12 Standard Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Nondestructive Method
    E1105 - 00(2008) Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference
    E1233 / E1233M - 14 Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential
    E1300 - 12ae1 Standard Practice for Determining Load Resistance of Glass in Buildings
    E1423 - 14 Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems
    E1424 - 91(2008) Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen
    E1425 - 14 Standard Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems
    E1748 - 95(2009) Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System
    E1886 - 13a Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials
    E1996 - 14 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes
    E2025 - 99(2006) Standard Test Method for Evaluating Fenestration Components and Assemblies for Resistance to Impact Energies
    E2068 - 00(2008) Standard Test Method for Determination of Operating Force of Sliding Windows and Doors
    E2112 - 07 Standard Practice for Installation of Exterior Windows, Doors and Skylights
    E2264 - 05(2013) Standard Practice for Determining the Effects of Temperature Cycling on Fenestration Products
    E2268 - 04(2011) Standard Test Method for Water Penetration of Exterior Windows, Skylights, and Doors by Rapid Pulsed Air Pressure Difference
    E2319 - 04(2011) Standard Test Method for Determining Air Flow Through the Face and Sides of Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
    E2395 - 06(2013) Standard Specification for Voluntary Security Performance of Window and Door Assemblies with and without Glazing Impact
    E2431 - 12 Standard Practice for Determining the Resistance of Single Glazed Annealed Architectural Flat Glass to Thermal Loadings
    E2461 - 12 Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs
    E2692 - 10 Standard Test Method for Structural Performance of Thermal Barriers in Fenestration Products ,
    F588 - 14 Standard Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact
    F842 - 14 Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact

    Physical Barriers

    DesignationTitle
    A627 - 03(2011) Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities
    F1450 - 12a Standard Test Methods for Hollow Metal Swinging Door Assemblies for Detention and Correctional Facilities
    F1592 - 12 Standard Test Methods for Detention Hollow Metal Vision Systems
    F1915 - 05(2012) Standard Test Methods for Glazing for Detention Facilities
    F2322 - 12 Standard Test Methods for Physical Assault on Vertical Fixed Barriers for Detention and Correctional Facilities

    Serviceability

    DesignationTitle
    E154 / E154M - 08a(2013)e1 Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover
    E605 - 93(2011) Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
    E736 - 00(2011) Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members
    E759 - 92(2011) Standard Test Method for Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members
    E760 - 92(2011) Standard Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members
    E761 - 92(2011) Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members
    E859 - 93(2011) Standard Test Method for Air Erosion of Sprayed Fire-Resistive Materials (SFRMs) Applied to Structural Members
    E937 - 93(2011) Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
    E1155 - 14 Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers
    E1155M - 14 Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers (Metric)
    E1399 / E1399M - 97(2013)e1 Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems
    E1486 - 14 Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
    E1486M - 14 Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria (Metric)
    E1513 - 93(2011) Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs)
    E1612 / E1612M - 94(2013)e1 Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
    E1643 - 11 Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs
    E1745 - 11 Standard Specification for Plastic Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs
    E1783 / E1783M - 96(2013)e1 Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
    E1993 / E1993M - 98(2013)e1 Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs
    E2174 - 14 Standard Practice for On-Site Inspection of Installed Firestops
    E2393 - 10a Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers
    E2634 - 11 Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems
    E2785 - 14 Standard Test Method for Exposure of Firestop Materials to Severe Environmental Conditions
    E2786 - 10 Standard Test Methods for Measuring Expansion of Intumescent Materials Used in Firestop and Joint Systems
    E2923 - 14 Standard Practice for Longevity Assessment of Firestop Materials Using Differential Scanning Calorimetry
    E2924 - 14 Standard Practice for Intumescent Coatings

    Solid Fuel Burning Appliances

    DesignationTitle
    E1509 - 12 Standard Specification for Room Heaters, Pellet Fuel-Burning Type
    E1602 - 03(2010)e1 Standard Guide for Construction of Solid Fuel Burning Masonry Heaters
    E2515 - 11 Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution Tunnel
    E2558 - 13 Standard Test Method for Determining Particulate Matter Emissions from Fires in Wood-Burning Fireplaces
    E2618 - 13 Standard Test Method for Measurement of Particulate Emissions and Heating Efficiency of Solid Fuel-Fired Hydronic Heating Appliances
    E2779 - 10 Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters
    E2780 - 10 Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters
    E2817 - 11 Standard Test Method for Test Fueling Masonry Heaters

    Sound Absorption

    DesignationTitle
    C384 - 04(2011) Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method
    C423 - 09a Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method
    C522 - 03(2009)e1 Standard Test Method for Airflow Resistance of Acoustical Materials
    E795 - 05(2012) Standard Practices for Mounting Test Specimens During Sound Absorption Tests
    E1050 - 12 Standard Test Method for Impedance and Absorption of Acoustical Materials Using a Tube, Two Microphones and a Digital Frequency Analysis System
    E2235 - 04(2012) Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods

    Sound Transmission

    DesignationTitle
    E90 - 09 Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
    E336 - 14 Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings
    E413 - 10 Classification for Rating Sound Insulation
    E492 - 09 Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine
    E596 - 96(2009) Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
    E756 - 05(2010) Standard Test Method for Measuring Vibration-Damping Properties of Materials
    E966 - 10e1 Standard Guide for Field Measurements of Airborne Sound Insulation of Building Facades and Facade Elements
    E989 - 06(2012) Standard Classification for Determination of Impact Insulation Class (IIC)
    E1007 - 13b Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
    E1123 - 86(2009) Standard Practices for Mounting Test Specimens for Sound Transmission Loss Testing of Naval and Marine Ship Bulkhead Treatment Materials
    E1289 - 08 Standard Specification for Reference Specimen for Sound Transmission Loss
    E1332 - 10a Standard Classification for Rating Outdoor-Indoor Sound Attenuation
    E1414 / E1414M - 11a Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum
    E1704 - 95(2010) Standard Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures
    E2179 - 03(2009) Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors
    E2249 - 02(2008) Standard Test Method for Laboratory Measurement of Airborne Transmission Loss of Building Partitions and Elements Using Sound Intensity
    E2611 - 09 Standard Test Method for Measurement of Normal Incidence Sound Transmission of Acoustical Materials Based on the Transfer Matrix Method
    E2964 - 14 Standard Test Method for Measurement of the Normalized Insertion Loss of Doors

    Specifications, Guides and Practices

    DesignationTitle
    C834 - 14 Standard Specification for Latex Sealants
    C919 - 12 Standard Practice for Use of Sealants in Acoustical Applications
    C920 - 14a Standard Specification for Elastomeric Joint Sealants
    C1021 - 08(2014) Standard Practice for Laboratories Engaged in Testing of Building Sealants
    C1184 - 14 Standard Specification for Structural Silicone Sealants
    C1193 - 13 Standard Guide for Use of Joint Sealants
    C1249 - 06a(2010) Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications
    C1281 - 14 Standard Specification for Preformed Tape Sealants for Glazing Applications
    C1311 - 14 Standard Specification for Solvent Release Sealants
    C1330 - 02(2013) Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants
    C1369 - 07(2014) Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units
    C1375 - 00(2014) Standard Guide for Substrates Used in Testing Building Seals and Sealants
    C1392 - 00(2014) Standard Guide for Evaluating Failure of Structural Sealant Glazing
    C1394 - 03(2012) Standard Guide for In-Situ Structural Silicone Glazing Evaluation
    C1401 - 14 Standard Guide for Structural Sealant Glazing
    C1472 - 10 Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
    C1481 - 12 Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)
    C1487 - 02(2012) Standard Guide for Remedying Structural Silicone Glazing
    C1518 - 04(2009) Standard Specification for Precured Elastomeric Silicone Joint Sealants
    C1520 - 02(2010) Standard Guide for Paintability of Latex Sealants
    C1564 - 04(2009) Standard Guide for Use of Silicone Sealants for Protective Glazing Systems
    C1756 - 14 Standard Guide for Comparing Sealant Behavior to Reference Photographs

    Speech Privacy

    DesignationTitle
    E1110 - 06(2011) Standard Classification for Determination of Articulation Class
    E1111 - 07 Standard Test Method for Measuring the Interzone Attenuation of Open Office Components
    E1130 - 08 Standard Test Method for Objective Measurement of Speech Privacy in Open Plan Spaces Using Articulation Index
    E1179 - 13 Standard Specification for Sound Sources Used for Testing Open Office Components and Systems
    E1374 - 06(2011) Standard Guide for Open Office Acoustics and Applicable ASTM Standards
    E1573 - 09 Standard Test Method for Evaluating Masking Sound in Open Offices Using A-Weighted and One-Third Octave Band Sound Pressure Levels
    E2638 - 10 Standard Test Method for Objective Measurement of the Speech Privacy Provided by a Closed Room

    Structural Performance of Connections in Building Construction

    DesignationTitle
    E488 / E488M - 10 Standard Test Methods for Strength of Anchors in Concrete Elements
    E754 - 80(2006) Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints
    E1190 - 11 Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members
    E1512 - 01(2007) Standard Test Methods for Testing Bond Performance of Bonded Anchors
    E2265 - 09 Standard Terminology for Anchors and Fasteners in Concrete and Masonry

    Terminology and Editorial

    DesignationTitle
    E631 - 06 Standard Terminology of Building Constructions

    Terminology of Building Seals and Sealants

    DesignationTitle
    C717 - 14a Standard Terminology of Building Seals and Sealants

    Weathering

    DesignationTitle
    C510 - 05a(2011) Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants
    C732 - 06(2012) Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants
    C734 - 06(2012) Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
    C793 - 05(2010) Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
    C1248 - 08(2012) Standard Test Method for Staining of Porous Substrate by Joint Sealants
    C1257 - 06a(2012) Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
    C1442 - 14 Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
    C1501 - 14 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
    C1519 - 10 Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
    C1589 / C1589M - 14 Standard Practice for Outdoor Weathering of Construction Seals and Sealants

    Whole Buildings and Facilities

    DesignationTitle
    E1480 - 92(2013) Standard Terminology of Facility Management (Building-Related)
    E1660 - 95a(2012) Standard Classification for Serviceability of an Office Facility for Support for Office Work
    E1661 - 95a(2012) Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness
    E1662 - 95a(2012) Standard Classification for Serviceability of an Office Facility for Sound and Visual Environment
    E1663 - 03(2010) Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology
    E1664 - 95a(2012) Standard Classification for Serviceability of an Office Facility for Layout and Building Factors
    E1665 - 95a(2012) Standard Classification for Serviceability of an Office Facility for Facility Protection
    E1666 - 95a(2012) Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions
    E1667 - 95a(2012) Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants
    E1668 - 95a(2012) Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff
    E1669 - 95a(2012) Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding
    E1670 - 95a(2012) Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance
    E1671 - 95a(2012) Standard Classification for Serviceability of an Office Facility for Cleanliness
    E1679 - 13 Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility, and for Determining What Serviceability is Provided or Proposed
    E1692 - 95a(2012) Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants
    E1693 - 95(2012) Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets
    E1694 - 95a(2012) Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies
    E1700 - 13 Standard Classification for Serviceability of an Office Facility for Structure and Building Envelope
    E1701 - 95(2012) Standard Classification for Serviceability of an Office Facility for Manageability
    E1836 / E1836M - 09e1 Standard Practice for Building Floor Area Measurements for Facility Management
    E2026 - 07 Standard Guide for Seismic Risk Assessment of Buildings
    E2136 - 04(2013) Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Durability
    E2151 - 02(2010) Standard Terminology of Guides for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings
    E2156 - 04(2013) Standard Guide for Evaluating Economic Performance of Alternative Designs, Systems, and Materials in Compliance with Performance Standard Guides for Single-Family Attached and Detached Dwellings
    E2267 - 04(2013) Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Indoor Air Quality
    E2320 - 04(2012) Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions
    E2351 - 04a(2013) Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Functionality
    E2557 - 07 Standard Practice for Probable Maximum Loss (PML) Evaluations for Earthquake Due-Diligence Assessments
    E2619 / E2619M - 09e1 Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in Buildings

    Other standards developed by ASTM committees:


    3D Imaging Standards

    Additive Manufacturing Standards

    Adhesive Standards

    Aerospace Material Standards

    Analytical Chemistry Standards

    Asset Management Standards

    Atmospheric Analysis Standards

    Biotechnology Standards

    Construction Standards

    Business Copy Product Standards

    Carbon Standards

    Catalyst Standards

    Cement Standards and Concrete Standards

    Coal Standards and Gas Standards

    Composite Standards

    Computerized System Standards

    Consumer Product Evaluation Standards

    Copper Standards

    Corrosion Standards and Wear Standards

    Durability of Nonmetallic Material Standards

    Electrical Insulating Material Standards

    Electrical Standards and Magnetic Conductor Standards

    Electronics Standards

    Environmental Standards

    Fastener Standards

    Fatigue Standards and Fracture Standards

    Fire Standards and Flammability Standards

    Forensic Science Standards

    Geotechnical Engineering Standards

    Glass Standards and Ceramic Standards

    Industrial Chemical Standards

    Industrial Hygiene Standards and Safety Standards

    Laboratory Testing Standards

    Leather Standards

    Masonry Standards

    Medical Device Standards and Implant Standards