Significance and Use
The purpose of this guide is to establish guidelines for audits of amusement rides and devices.
An audit can include inspections, evaluations, or examinations during the design, manufacturing, installation, commissioning, operation, or major modification of an amusement ride or device.
This guide is not intended to require recurring design, manufacturing, installation, commissioning or major modification audits. Rather, it is intended that such audits be performed during the relevant stages of an amusement ride or device’s design, manufacture, installation, commissioning or major modification.
1. Scope
1.1 This guide establishes guidelines for auditing conformance to ASTM Committee F24 Standards during an audit of an amusement ride or device within a defined scope.
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) 
The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
F747 Terminology Relating to Amusement Rides and Devices
F770 Practice for Ownership and Operation of Amusement Rides and Devices
F1159 Practice for Design and Manufacture of Patron Directed, Artificial Climbing Walls, Dry Slide, Coin Operated and Purposeful Water Immersion Amusement Rides and Devices and Air-Supported Structures
F1193 Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices
F2291 Practice for Design of Amusement Rides and Devices
Index Terms
inspection; inspector; Amusement rides/devices; Inspection ;
ICS Code
ICS Number Code 97.200.99 (Other equipment for entertainment)
DOI: 10.1520/F0893-10
ASTM International is a member of CrossRef.
Citing ASTM Standards
[Back to Top]
