Active Standard ASTM F626 | Developed by Subcommittee: F14.40
Book of Standards Volume: 01.06
Historical (view previous versions of standard)
This specification covers the materials, coating requirements, and inspection of the following fence accessories that are used for chain-link fences: post and line caps; rail and brace ends; top rail sleeves; tie wires, clips, and fasteners; tension and brace bands; tension bars; truss rod assembly; barbed wire arms; color coating of fittings; and fitting size terminology.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
1.1 This specification covers the materials, coating requirements, and inspection of fence accessories for chain-link fence for the following:
1.1.1 Post and line caps,
1.1.2 Rail and brace ends,
1.1.3 Top rail sleeves,
1.1.4 Tie wires, clips, and fasteners,
1.1.5 Tension and brace bands,
1.1.6 Tension bars,
1.1.7 Truss rod assembly,
1.1.8 Barbed wire arms,
1.1.9 Color coating of fittings, and
1.1.10 Fitting size terminology.
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
A641/A641M Specification for Zinc-Coated (Galvanized) Carbon Steel Wire
A809 Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
A817 Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
B26/B26M Specification for Aluminum-Alloy Sand Castings
B85 Specification for Aluminum-Alloy Die Castings
B108 Specification for Aluminum-Alloy Permanent Mold Castings
B117 Practice for Operating Salt Spray (Fog) Apparatus
B209 Specification for Aluminum and Aluminum-Alloy Sheet and Plate
B209M Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric)
B211 Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire
B211M Specification for Aluminum and Aluminum-Alloy Rolled or Cold-Finished Bar, Rod, and Wire (Metric)
B221 Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
B221M Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes (Metric)
B429/B429M Specification for Aluminum-Alloy Extruded Structural Pipe and Tube
B800 Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes--Annealed and Intermediate Tempers
F552 Terminology Relating to Chain Link Fencing
F668 Specification for Polyvinyl Chloride (PVC), Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric
F934 Specification for Colors for Polymer-Coated Chain Link Fence Materials
U.S. Government StandardMIL-R-60346-C Roving, Glass, Fibrous (For Prepreg Tape and Roving, Filament Winding, and Pultrusion Applications) Available from Standardization Documents Order Desk, Bldg. 4 Section D, 700 Robbins Ave., Philadelphia, PA 19111-5094, Attn: NPODS.
ICS Number Code 23.040.40 (Metal fittings); 91.090 (External structures)
UNSPSC Code 30121718(Safety fence and net for rock drop)