| ||Format||Pages||Price|| |
|15||$50.00||  ADD TO CART|
|Hardcopy (shipping and handling)||15||$50.00||  ADD TO CART|
This specification describes and grades various levels of performance to provide standard criteria upon which to select suitable hasps and other attachment devices for padlocks and seals. Specially made hasps used by the Department of Defense or other highly sensitive applications are not covered by this specification. The tests specified are laboratory tests, and although they simulate field conditions as to attacks, they do not duplicate these conditions. Hasps that have special attributes not related to security may be used. Test specimen of each size and model shall be selected at random. Four hasps shall be selected for the forcing tests. Test apparatus preparation for the tensile loading device, shock impactor, and torque test fixture are detailed. Forcing tests includes the following: (1) staple axial load test, (2) hasp staple impact test, (3) hasp staple cutting test, and (4) hasp staple torque test. The test value requirements for the forcing tests are specified for the following grades: Grade 1, Grade 2, Grade 3, Grade 4, Grade 5, and Grade 6. The impact fixture assembly including the mounting block, anvil assembly, and weight assembly; assemble torque fixture; staple axial load test fixture; and staple cutting fixture are illustrated in detail.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
1.1 This specification describes and grades various levels of performance to provide users of the standard with criteria upon which to select suitable hasps and other attachment devices. No effort has been made to include criteria for specially made hasps used by the Department of Defense or other highly sensitive applications.
1.2 The tests described are laboratory tests, and although they simulate field conditions as to attacks, they do not duplicate these conditions. Tests described are repeatable in the laboratory.
1.3 Some users of this standard may wish to use hasps that have special attributes not related to security.
1.4 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are provided for information only.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
F883 Performance Specification for Padlocks
ICS Number Code 21.060.10 (Bolts, screws, studs)
UNSPSC Code 46171501(Padlocks); 31162402(Hasps)
|Link to Active (This link will always route to the current Active version of the standard.)|
ASTM F2155-01(2009), Standard Specification for Performance of Hasps and Other Attachment Devices for Padlocks or Seals, ASTM International, West Conshohocken, PA, 2009, www.astm.orgBack to Top