ASTM F2154 - 13

    Standard Specification for Sound-Absorbing Board, Fibrous Glass, Perforated Fibrous Glass Cloth Faced

    Active Standard ASTM F2154 | Developed by Subcommittee: F25.02

    Book of Standards Volume: 01.07


      Format Pages Price  
    PDF 4 $37.00   ADD TO CART
    Hardcopy (shipping and handling) 4 $37.00   ADD TO CART
    Standard + Redline PDF Bundle 8 $44.40   ADD TO CART


    Abstract

    This specification covers fibrous glass sound-absorbing board with a perforated fibrous glass cloth facing for sound reduction in ship spaces with high noise levels. It also measures and describes the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessment of materials, products, or assemblies under actual fire conditions. The sound-absorbing board shall conform to the following performance requirements: density, surface flame spread and smoke generation properties, facing separation, and sound absorption coefficients.

    This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

    Significance and Use

    1. Scope

    1.1 This specification covers fibrous glass sound-absorbing board with a perforated fibrous glass cloth facing for sound reduction in ship spaces with high noise levels. This specification is primarily for materials used on ships. Additional requirements, testing, and certification are required for use of this material aboard U.S. Coast Guard inspected vessels in the United States.

    1.2 Supplemental requirements and exceptions to the requirements discussed herein for ships of the US Navy are included in Supplementary Requirements S1.

    1.3 This standard measures and describes the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessment of materials, products, or assemblies under actual fire conditions.

    1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.


    2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    ASTM Standards

    C423 Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method

    C634 Terminology Relating to Building and Environmental Acoustics

    D3951 Practice for Commercial Packaging

    E84 Test Method for Surface Burning Characteristics of Building Materials

    ANSI Standard

    ANSI/ASQCZ1.4 Sampling Procedures and Tables for Inspection by Attributes Available from American National Standards Institute (ANSI), 25 W. 43rd St., 4th Floor, New York, NY 10036, http://www.ansi.org.


    ICS Code

    ICS Number Code 91.120.20 (Acoustics in buildings. Sound insulation)

    UNSPSC Code

    UNSPSC Code 30140000(Insulation)


    DOI: 10.1520/F2154-13

    ASTM International is a member of CrossRef.

    ASTM F2154

    Citing ASTM Standards
    Back to Top