ASTM F2014 - 00(2013)

    Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications

    Active Standard ASTM F2014 | Developed by Subcommittee: F25.11

    Book of Standards Volume: 01.07


    Buy Standard (PDF)
    16 pages
    $48.00
    Buy Standard (Print)
    16 pages
    $48.00

    Historical (view previous versions of standard)


    ASTM F2014

    Abstract

    This specification covers the pipe materials and dimensions for producing non-reinforced extruded tee connections manufactured by mechanical forming processes. The term ?extruded tee connection? applies to butt-weld or socket-weld connections. The non-reinforced extruded pipe tee connection is an alternative to the tee fittings, nozzle, and other welded connections. The non-reinforced extruded pipe tee connection has been widely used for systems in the marine, process piping, food, pharmaceutical, and similar industries. Different materials that have acceptable forming qualities to produce extruded tee connections shall consist of copper, copper-nickel alloy, titanium, steel, and stainless steel. The extruded tee connection shall be free from burrs and cracks, which would affect the suitability for the intended service.

    This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

    1. Scope

    1.1 This specification covers the pipe materials and dimensions for producing non-reinforced extruded tee connections manufactured by mechanical forming processes. The term “extruded tee connection” applies to butt-weld or socket-weld connections. This specification refers to the forming process that leads to welding or brazing.

    1.2 The non-reinforced extruded pipe tee connection is an alternative to the tee fittings, nozzle, and other welded connections.

    1.3 The non-reinforced extruded pipe tee connection has been widely used for systems in the marine, process piping, food, pharmaceutical, and similar industries.

    1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

    1.5 The extruded tee connection will be welded in accordance with Specification F722. Brazing of tee connections will be in accordance with ANSI B31.5.


    2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    ANSI Standards

    B31.1 Power Piping Available from American National Standards Institute (ANSI), 25 W. 43rd St., 4th Floor, New York, NY 10036.

    B31.3 Chemical Plant and Petroleum Refining Piping

    B31.5 Refrigeration Piping

    B36.10M Welded and Seamless Wrought Steel Pipe

    ASTM Standards

    A53/A53M Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless

    A106/A106M Specification for Seamless Carbon Steel Pipe for High-Temperature Service

    A135 Specification for Electric-Resistance-Welded Steel Pipe

    A139/A139M Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)

    A178/A178M Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes

    A199/A199M Specification for Seamless Cold-Drawn Intermediate Alloy-Steel Heat-Exchanger and Condenser Tubes

    A200 Specification for Seamless Intermediate Alloy-Steel Still Tubes for Refinery Service

    A209/A209M Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes

    A210/A210M Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes

    A250/A250M Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes

    A252 Specification for Welded and Seamless Steel Pipe Piles

    A312/A312M Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes

    A333/A333M Specification for Seamless and Welded Steel Pipe for Low-Temperature Service

    A334/A334M Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service

    A500 Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes

    A512 Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing

    A519 Specification for Seamless Carbon and Alloy Steel Mechanical Tubing

    A587 Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry

    A589 Specification for Seamless and Welded Carbon Steel Water-Well Pipe

    A672 Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures

    B88 Specification for Seamless Copper Water Tube

    B88M Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys B0881

    B280 Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service

    B337 Specification for Seamless and Welded Titanium and Titanium Alloy Pipe

    B338 Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers

    B466/B466M Specification for Seamless Copper-Nickel Pipe and Tube

    B467 Specification for Welded Copper-Nickel Pipe

    F722 Specification for Welded Joints for Shipboard Piping Systems

    ISO Standard

    ISO-4200 Plain End Steel Tubes, Welded and Seamless--General Table‚ÄČ5 of Dimensions and Masses Per Unit Length


    ICS Code

    ICS Number Code 23.040.60 (Flanges, couplings and joints)

    UNSPSC Code

    UNSPSC Code 40170000(Pipe piping and pipe fittings)


    DOI: 10.1520/F2014-00R13

    ASTM International is a member of CrossRef.

    ASTM F2014

    Citing ASTM Standards
    Back to Top