Significance and Use
This guide is primarily intended to assist decision-makers and spill-responders in contingency planning, spill response, and training.
This guide is not specific to site or type of oil.
1.1 This guide covers the use of chemical cleaning agents on oiled shorelines. This guide is not applicable to other chemical agents nor to the use of such products in open waters.
1.2 The purpose of this guide is to provide information that will enable spill responders to decide whether to use chemical shoreline cleaning agents as part of the oil spill cleanup response.
1.3 This is a general guide only. It is assumed that conditions at the spill site have been assessed and that these conditions are suitable for the use of cleaning agents. It is assumed that permission has been obtained to use the chemical agents. Variations in the behavior of different types of oil are not dealt with in this guide and may change some of the parameters noted herein.
1.4 This guide covers two different types of shoreline cleaners: those that disperse oil into the water and those that disperse little oil into the water under low energy levels. The selection criteria for these two types can differ widely. This guide does not cover dispersants.
1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
F1686 Guide for Surveys to Document and Assess Oiling Conditions on Shorelines
chemical treating agent; oiled shorelines; oil-spill cleanup; shoreline cleanup; surface washing agent; Chemical treating agent; Environmental control/fate; Marine environments--oil spill control/response; Oil-contaminated shorelines; Oil spill control systems; Shoreline cleaning (of marine environments); Surface washing agent
ICS Number Code 13.020.40 (Pollution, pollution control and conservation)
ASTM International is a member of CrossRef.
Citing ASTM Standards
[Back to Top]