Active Standard ASTM F1712 | Developed by Subcommittee: F14.50
Book of Standards Volume: 01.06
Historical (view previous versions of standard)
This specification covers chain-link fencing material applications for high security applications. Fabric shall be attached with tie wires or other appropriate fasteners. Fabric shall be attached with tie wires or other appropriate fasteners. Fabric, shall be attached to the terminal post using tension bars with tension bands or vertical straps. Barbed wire shall be installed, in accordance with the requirement, with one or more strands, depending on the degree of security required, or in conjunction with the use of barbed tape obstacles. Fabric shall be secured to tension wire using steel hog rings.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
1.1 This specification covers chain-link fencing material applications for high security applications.
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
A121 Specification for Metallic-Coated Carbon Steel Barbed Wire
A392 Specification for Zinc-Coated Steel Chain-Link Fence Fabric
A491 Specification for Aluminum-Coated Steel Chain-Link Fence Fabric
A824 Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence
F567 Practice for Installation of Chain-Link Fence
F626 Specification for Fence Fittings
F668 Specification for Polyvinyl Chloride (PVC), Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric
F900 Specification for Industrial and Commercial Steel Swing Gates
F934 Specification for Colors for Polymer-Coated Chain Link Fence Materials
F1043 Specification for Strength and Protective Coatings on Steel Industrial Fence Framework
F1184 Specification for Industrial and Commercial Horizontal Slide Gates
F1345 Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric
F1379 Terminology Relating to Barbed Tape
F1664 Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence
F1665 Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence
F1910 Specification for Long Barbed Tape Obstacles
F1911 Practice for Installation of Barbed Tape
F2200 Specification for Automated Vehicular Gate Construction
UL StandardUL325 Door, Drapery, Gate, Louver, and Window Operators and Systems Available from Underwriters Laboratories (UL), 2600 N.W. Lake Rd., Camas, WA 98607-8542, http://www.ul.com.
Chain Link Fence Manufacturers InstituteWLG2445 Chain Link Fence Wind Load Guide for the Selection of Line Post and Line Post Spacing Available from Chain Link Fence Manufacturers Institute, 10015 Old Columbia Road, Suite B-215, Columbia, MD 21046, http://www.chainlinkinfo.org.
ICS Number Code 91.090 (External structures)
UNSPSC Code 31151609(Chain links)