ASTM F1522-95(2001)

    Standard Guide for Use of the Steam Stripping Process in Mitigating Chemical Spills (Withdrawn 2007)

    Withdrawn Standard: ASTM F1522-95(2001) | Developed by Subcommittee: F20.22

    WITHDRAWN, NO REPLACEMENT


      Format Pages Price  
    PDF 4 $45.60   ADD TO CART


    Withdrawn Rationale:

    This guide covers the considerations for the use of steam stripping in the mitigation of spilled chemicals (including hydrocarbons) dissolved in ground and surface waters. Aesthetic and socioeconomic factors are not considered; although, these and other factors are often important in spill response.

    Formerly under the jurisdiction of Committee F20 on Hazardous Substances and Oil Spill Response, this guide was withdrawn in November 2007 due to lack of use.

    1. Scope

    1.1 This guide covers the considerations for the use of steam stripping in the mitigation of spilled chemicals (including hydrocarbons) dissolved in ground and surface waters. Aesthetic and socioeconomic factors are not considered; although, these and other factors are often important in spill response.

    1.2 This guide addresses the application of steam stripping alone or in conjunction with other technologies.

    1.3 In making decisions with regards to discharging treated water and operating a boiler, appropriate government authorities must be consulted as required by law.

    1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. In addition, it is the responsibility of the user to ensure that such activity takes place under the control and direction of a qualified person with full knowledge of any potential or appropriate safety and health protocols.



    Referencing This Standard

    DOI: 10.1520/F1522-95R01

    ASTM International is a member of CrossRef.

    Citation Format

    ASTM F1522-95(2001), Standard Guide for Use of the Steam Stripping Process in Mitigating Chemical Spills (Withdrawn 2007), ASTM International, West Conshohocken, PA, 1995, www.astm.org

    Back to Top