Standards

ASTM E2517 - 06


ASTM E2517 - 06 Standard Specification for Cargo Bed Cover, Type III (M35A2, 2 1/2 Ton Cargo Truck/M1078, 2 1/ 2 Ton Lightweight Medium Tactical Vehicle (LMTV)/M1082, 2 1/ 2 Ton LMTV Trailer)


Active Standard ASTM E2517 Developed by Subcommittee: E06.53 |Book of Standards Volume: 04.12

more info 12 pages $ 46.00
more info 12 pages $ 46.00

ASTM License Agreement Shipping & Handling

More E06.53 Standards Related Products
Copyright/Permissions Standard References

ASTM E2517

Abstract

This specification covers the general requirements for the Type III cargo bed cover (CBC). The Type III cargo bed cover is a removable general purpose rigid enclosure for the cargo bed of the 2-1/2 ton cargo truck (M35A2), 2-1/2 ton lightweight medium tactical vehicle (LMTV; M1078), and 2-1/2 ton LMTV trailer (M1082). The CBC provides environmental protection and security for mission equipment and items of general transport.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope

1.1 This specification covers the general requirements for the Type III Cargo Bed Cover (CBC). The Type III Cargo Bed Cover is a removable general purpose rigid enclosure for the cargo bed of the M35A2, 21/2 Ton Cargo Truck/M1078, 2 1/2 Ton Lightweight Medium Tactical Vehicle (LMTV)/M1082, 2 1/2 Ton LMTV Trailer. The CBC provides environmental protection and security for mission equipment and items of general transport.

1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parenthesis are for information only.

The following safety hazards caveat pertains only to the test required portion, Section 4, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.


2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

E1925 Specification for Engineering and Design Criteria for Rigid Wall Relocatable Structures
F501 Test Method for Aerospace Materials Response to Flame, With Vertical Test Specimen

Federal Standard

FED-STD-595 Colors Used in Government Procurement

Military Standards

MIL-CDTL-53072 Chemical Agent Resistant Coating (CARC) System Application Procedures and Quality Control Inspection

Military Handbook

MIL-HDBK-1791 Designing for Internal Aerial Delivery in Fixed Winged Aircraft

OSHA Documents

Title29CFR1910 OHSA Permissible Exposure Limits

The American Conference of Governmental Industrial Hygienists (ACGIH)

ACGIHThresholdLimitV


Index Terms

Cargo Bed; Cover; Shelter; M35A2, 2 1/2; Ton Cargo Truck M1078, 2 1/2; Ton Lightweight Medium Tactical Vehicle (LMTV) M1082, 2 1/2; Ton LMTV Trailer;



ICS Code

ICS Number Code 43.080.10 (Trucks and trailers)



DOI: 10.1520/E2517-06

ASTM International is a member of CrossRef.


Citing ASTM Standards

[Back to Top]

Standards Tracker

Standards Subscriptions


Related Standards:
E2518
E2462
E2463
D5728
F2212
See All