ASTM E2352 - 04(2010)

    Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments-Cleanroom Operations

    Active Standard ASTM E2352 | Developed by Subcommittee: E21.05

    Book of Standards Volume: 15.03


    Buy Standard (PDF)
    14 pages
    $48.00
    Buy Standard (Print)
    14 pages
    $48.00

    Historical (view previous versions of standard)


    ASTM E2352

    Abstract

    This practice specifies the basic requirements, procedures, and practices for operating aerospace cleanrooms and controlled environments and the precautions associated with the facility and equipment used. This practice covers the requirements for operational systems, appropriate cleanroom clothing, authorized work personnel, stationary equipments, materials and mobile equipments, proper cleanroom operations, correct cleaning methods, and critical surfaces.

    This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

    1. Scope

    1.1 This practice specifies basic requirements, procedures, and practices for operating aerospace cleanrooms and controlled environments and precautions associated with the facility and equipment used.

    1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.


    2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    ASTM Standards

    D737 Test Method for Air Permeability of Textile Fabrics

    E595 Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment

    E1216 Practice for Sampling for Particulate Contamination by Tape Lift

    E1234 Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft

    E1235 Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft

    E1549 Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations

    E1559 Test Method for Contamination Outgassing Characteristics of Spacecraft Materials

    E1560 Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers

    E1731 Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves

    E2042 Practice for Cleaning and Maintaining Controlled Areas and Clean Rooms

    E2088 Practice for Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle Deposition in Cleanrooms and Associated Controlled Environments

    E2217 Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas

    F25 Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas

    F50 Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles

    F51 Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments

    F318 Practice for Sampling Airborne Particulate Contamination in Cleanrooms for Handling Aerospace Fluids

    Government Standards

    NASA-STD-6001,Test#7 Flammability, Odor, Offgassing and Compatibility Requirements and Test Procedures for Materials in Environments That Support Combustion


    ICS Code

    ICS Number Code 13.040.35 (Cleanrooms and associated controlled environments)

    UNSPSC Code

    UNSPSC Code


    DOI: 10.1520/E2352-04R10

    ASTM International is a member of CrossRef.

    ASTM E2352

    Citing ASTM Standards
    Back to Top