WITHDRAWN, NO REPLACEMENT
| ||Format||Pages||Price|| |
|6||$52.80||  ADD TO CART|
This practice covers the analysis of extracts of environmental samples for lead content using field-portable electroanalytical devices.
Formerly under the jurisdiction of Committee E06 on Performance of Buildings, this practice was withdrawn in February 2010 in accordance with section 10.5.3.1 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.
1.1 This practice covers the analysis of extracts of environmental samples for lead content using field-portable electroanalytical devices.
1.2 Matrices of concern in this practice include paint, settled dust, soil, and air particulate.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
D1193 Specification for Reagent Water
D5438 Practice for Collection of Floor Dust for Chemical Analysis
E1553 Practice for Collection of Airborne Particulate Lead During Abatement and Construction Activities
E1605 Terminology Relating to Lead in Buildings
E1613 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
E1644 Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
E1645 Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
E1726 Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
E1727 Practice for Field Collection of Soil Samples for Lead Determination by Atomic Spectrometry Techniques
E1728 Practice for Field Collection of Settled Dust Samples Using Wipe Sampling Methods for Lead Determination by Atomic Spectrometry Techniques
E1729 Practice for Field Collection of Dried Paint Samples for Lead Determination by Atomic Spectrometry Techniques
E1741 Practice for Preparation of Airborne Particulate Lead Samples Collected During Abatement and Construction Activities for Subsequent Analysis by Atomic Spectrometry
E1775 Guide for Evaluating the Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
E1973 Practice for Collection of Surface Dust by Air Sampling Pump Vacuum Technique for Subsequent Lead Determination
Federal StandardTitle 40, CFR Part 261, Appendix II—Method 1 Toxic Characteristic Leaching Procedure (TCLP)
|Link to Active (This link will always route to the current Active version of the standard.)|
ASTM E2051-01, Standard Practice for the Determination of Lead in Paint, Settled Dust, Soil and Air Particulate by Field-Portable Electroanalysis (Withdrawn 2010), ASTM International, West Conshohocken, PA, 2001, www.astm.orgBack to Top