WITHDRAWN, NO REPLACEMENT
| ||Format||Pages||Price|| |
|6||$52.80||  ADD TO CART|
This guide describes procedures to be considered for the testing and certification of metal, ore, and metal-related reference materials in the form of blocks, disks, rods, wires, chips, and powders.
Formerly under the jurisdiction of Committee E01 on Analytical Chemistry for Metals, Ores, and Related Materials, this guide was withdrawn in February 2010 in accordance with section 10.5.3.1 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.
1.1 This guide describes procedures to be considered for the testing and certification of metal, ore, and metal-related reference materials in the form of blocks, disks, rods, wires, chips, and powders.
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
E32 Practices for Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition
E34 Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
E50 Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores and Related Materials
E55 Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition
E59 Practice for Sampling Steel and Iron for Determination of Chemical Composition
E88 Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition
E135 Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
E178 Practice for Dealing with Outlying Observations
E255 Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition
E350 Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron
E351 Test Methods for Chemical Analysis of Cast Iron--All Types
E716 Practices for Sampling Aluminum and Aluminum Alloys for Spectrochemical Analysis
E826 Practice for Testing Homogeneity of Materials for the Development of Reference Materials
E877 Practice for Sampling and Sample Preparation of Iron Ores and Related Materials
E1019 Test Method for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and Iron
ISO StandardsISO Guide35 Certification of Reference Materials--General and Statistical Principles
|Link to Active (This link will always route to the current Active version of the standard.)|
ASTM E1724-95(2001), Standard Guide for Testing and Certification of Metal and Metal-Related Reference Materials (Withdrawn 2010), ASTM International, West Conshohocken, PA, 1995, www.astm.orgBack to Top