ASTM E1410-91(2005)

    Standard Practice for Specifying Data for Evaluation of Energy Used in Residential Buildings (Withdrawn 2014)

    Withdrawn Standard: ASTM E1410-91(2005) | Developed by Subcommittee: E06.25

    WITHDRAWN, NO REPLACEMENT


      Format Pages Price  
    PDF 5 $51.60   ADD TO CART


    Withdrawn Rationale:

    This practice covers the measurement of energy used for space conditioning and domestic water heating in both single and multifamily buildings. It is intended to assist those who design test methods for field monitoring projects. It establishes a uniform set of guidelines for specifying the data needed to evaluate energy used for space conditioning and domestic water heating in residential buildings, and is intended to promote the exchange of data and to improve measurement practices.

    Formerly under the jurisdiction of Committee E06 on Performance of Buildings, this practice was withdrawn in January 2014 in accordance with section 10.6.3 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.

    1. Scope

    1.1 This practice covers the measurement of energy used for space conditioning and domestic water heating in both single and multifamily buildings. It is intended to assist those who design test methods for field monitoring projects. It establishes a uniform set of guidelines for specifying the data needed to evaluate energy used for space conditioning and domestic water heating in residential buildings, and is intended to promote the exchange of data and to improve measurement practices.

    1.2 This practice neither specifies the complete experimental design nor defines the data analysis technique to be used.

    1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.



    2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    ANSI/ASHRAE Standards

    ANSI/ASHRAEStandard1 Methods of Testing for Seasonal Efficiency of Unitary Air Conditioners and Heat Pumps

    Other Standards

    US/DOE10CFR430.22(e) Appliance Efficiency Standards Available from the Superintendent of Documents, U.S. Government Printing Office, Washington, D.C. 20402. U.S. Department of Energy, Report No. DOE/CE-0220. Title 10--Energy, Chapter 11-- Department of Energy, Subchapter D--Energy Conservation . Part 430--Energy Conservation Program for Consumer Products.

    ASTM Standards

    C1060 Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings

    E631 Terminology of Building Constructions

    E741 Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution

    E779 Test Method for Determining Air Leakage Rate by Fan Pressurization


    DOI: 10.1520/E1410-91R05

    ASTM International is a member of CrossRef.