Abstract
This specification covers standard dimensional requirements for glass distillation flasks. It includes general purpose flasks and flasks designed for specific tests especially in the petroleum testing area. Distillation flasks shall be of the following types: Type I and Type II. Type II distilling flasks shall be of the following classes: Class 1; Class 2; Class 3; Class 4; and Class 5.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
1. Scope
1.1 This specification covers standard dimensional requirements for glass distillation flasks. It includes general purpose flasks and flasks designed for specific tests especially in the petroleum testing area.
Note 1—For packaging standards, choose among Specifications E920, E1157, and E1133.
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
2. Referenced Documents (purchase separately)
The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
D20 Test Method for Distillation of Road Tars
D86 Test Method for Distillation of Petroleum Products at Atmospheric Pressure
D216 Method of Test for Distillation of Natural Gasoline
D233 Test Methods of Sampling and Testing Turpentine
D246 Test Method for Distillation of Creosote and Creosote-Coal Tar Solutions
D285 Test Method for DISTILLATION OF CRUDE PETROLEUM
D402 Test Method for Distillation of Cutback Asphaltic (Bituminous) Products
D447 Test Method for Distillation Of Plant Spray Oils
D801 Test Methods for Sampling and Testing Dipentene
D802 Test Methods for Sampling and Testing Pine Oils
D850 Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials
D1078 Test Method for Distillation Range of Volatile Organic Liquids
D2569 Test Method for Distillation of Pitch
E3 Guide for Preparation of Metallographic Specimens
E4 Practices for Force Verification of Testing Machines
E438 Specification for Glasses in Laboratory Apparatus
E671 Specification for Maximum Permissible Thermal Residual Stress in Annealed Glass Laboratory Apparatus
E920 Specification for Commercially Packaged Laboratory Apparatus
E921 Specification for Export Packaged Laboratory Apparatus
E1133 Practice for Performance Testing of Packaged Laboratory Apparatus for United States Government Procurements
E1157 Specification for Sampling and Testing of Reusable Laboratory Glassware
Other Documents
U.S. Bureau of Mines Method 100.13 Available from Standardization Documents Order Desk, DODSSP, Bldg. 4, Section D, 700 Robbins Ave., Philadelphia, PA 19111-5098, http://dodssp.daps.dla.mil.
Keywords
distilling; flasks; glass; Distillation flasks--specifications; Filter flasks; Flasks (laboratory)--specifications; Glass laboratory apparatus--specifications; Laboratory apparatus--specifications ;
ICS Code
ICS Number Code 71.040.20 (Laboratory ware and related apparatus)
DOI: 10.1520/E1405-98R10
ASTM International is a member of CrossRef.
Citing ASTM Standards
[Back to Top]