ASTM E1024-97(2004)

    Withdrawn Standard: ASTM E1024-97(2004) Standard Guide for Chemical Analysis of Metals and Metal Bearing Ores by Flame Atomic Absorption Spectrophotometry (Withdrawn 2004)

    Developed by Subcommittee: E01.20

    WITHDRAWN, NO REPLACEMENT

    Buy Standard (PDF)
    3 pages
    $44.40


    Withdrawn Rationale:

    This guide covers general recommendations for the use of atomic absorption spectrophotometers in the flame mode for the chemical analysis of metals and metal bearing ores by ASTM methods.

    Formerly under the jurisdiction of Committee E01 on Analytical Chemistry for Metals, Ores, and Related Materials, this guide was withdrawn in October 2004 because it is no longer in practice.

    1. Scope

    1.1 This guide covers general recommendations for the use of atomic absorption spectrophotometers in the flame mode for the chemical analysis of metals and metal bearing ores by ASTM methods. It describes tests to determine whether the instrument's performance is satisfactory and recommends procedures for taking atomic absorption measurements. Additional information may be found in Practice E663.

    1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.


    DOI: 10.1520/E1024-97R04

    ASTM International is a member of CrossRef.


    Citing ASTM Standards
    Back to Top