| ||Format||Pages||Price|| |
|5||$42.00||  ADD TO CART|
|Hardcopy (shipping and handling)||5||$42.00||  ADD TO CART|
Significance and Use
4.1 The standards employed in the Process Stream Analyzer PSPV Generation Flow Diagram each have a specific deliverable that when combined into a single system produces a PSPV enabling the representation of product by process stream analyzer.
1.2 Generating a Process Stream Property Value from the application of a process stream analyzer requires the use of several ASTM standards. These standards describe procedures to collect a representative sample, establish and validate the relationship to the primary test method, and calculate a property value with an expected uncertainty. Each standard builds or prepares data, or both, to be used in another standard. The workflow process culminates to produce a process stream analyzer result that represents a user defined batch of product. The sequence in which the standards are to be utilized is defined in this guide.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
D3764 Practice for Validation of the Performance of Process Stream Analyzer Systems
D4177 Practice for Automatic Sampling of Petroleum and Petroleum Products
D6122 Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
D6299 Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
D6624 Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data
D6708 Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
D7235 Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
D7278 Guide for Prediction of Analyzer Sample System Lag Times
D7453 Practice for Sampling of Petroleum Products for Analysis by Process Stream Analyzers and for Process Stream Analyzer System Validation
D7808 Practice For Determining the Site Precision of a Process Stream Analyzer on Process Stream Material
E1655 Practices for Infrared Multivariate Quantitative Analysis
E2617 Practice for Validation of Empirically Derived Multivariate Calibrations
ICS Number Code 25.040.40 (Industrial process measurement and control)