| ||Format||Pages||Price|| |
|3||$39.00||  ADD TO CART|
|Hardcopy (shipping and handling)||3||$39.00||  ADD TO CART|
Significance and Use
3.1 Tars change in volume with changes in temperature. They are loaded or transferred at widely varying temperatures. Volume correction factors are used to adjust bulk volumes measured at those temperatures with corresponding volumes at a base temperature of either 60°F or 15.6°C for the purposes of custody transfer and accounting operations.
3.2 Correction factors as provided in this table have proven to be sufficiently accurate for the intended purposes.
3.3 The coefficient of expansion for Specification Type RT-12 at 60°F (15.6°C) per degree F is 0.00030.
1.1 This table ( ) has been prepared by the National Institute of Standards and Technology to meet a demand from the tar industry for a short and convenient table for reducing volumes of road tar to the basis of 60°F (15.6°C) when extreme accuracy is not required. The table shows the volume occupied at 60°F (15.6°C) by a quantity of material occupying unit volume at the indicated temperature.
1.2 Units—The values stated in inch-pound units are to be regarded as the standard. The values given in
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
D490 Specification for Road Tar
ICS Number Code 93.080.20 (Road construction materials)
UNSPSC Code 30121700(Road and railroad construction materials); 30121601(Asphalt)
|Link to Active (This link will always route to the current Active version of the standard.)|
ASTM D633-11(2016), Standard Volume Correction Table for Road Tar, ASTM International, West Conshohocken, PA, 2016, www.astm.orgBack to Top