ASTM D5772 - 10

    Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)

    Active Standard ASTM D5772 | Developed by Subcommittee: D02.07

    Book of Standards Volume: 05.02


      Format Pages Price  
    PDF 7 $43.00   ADD TO CART
    Hardcopy (shipping and handling) 7 $43.00   ADD TO CART
    Standard + Redline PDF Bundle 14 $51.60   ADD TO CART


    Significance and Use

    For petroleum products and diesel fuels, the cloud point is an index of the lowest temperature of its utility for certain applications. Wax crystals of sufficient quantity can plug filters used in some fuel systems.

    Petroleum blending operations require precise measurement of the cloud point.

    This test method can determine the temperature of the test specimen at which wax crystals have formed sufficiently to be observed as a cloud, with a resolution of 0.1°C.

    This test method provides results that when rounded to the next lower integer are equivalent to Test Method D2500.

    This test method is more precise than Test Method D2500.

    1. Scope

    1.1 This test method covers the description of the determination of the cloud point of petroleum products and biodiesel fuels that are transparent in layers 40 mm in thickness by an automatic instrument using a linear cooling rate.

    1.2 This test method covers the range of temperatures from 60 to 49°C with temperature resolution of 0.1°C, however, the range of temperatures included in the 1997 interlaboratory cooperative test program only covered the temperature range of 56 to +34°C.

    1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

    1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.


    2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    ASTM Standards

    D2500 Test Method for Cloud Point of Petroleum Products

    D4057 Practice for Manual Sampling of Petroleum and Petroleum Products

    D4177 Practice for Automatic Sampling of Petroleum and Petroleum Products

    Energy Institute Standard

    IP219 Test Method for Cloud Point of Petroleum Products Available from Energy Institute, 61 New Cavendish St., London, WIG 7AR, U.K., http://www.energyinst.org.uk.


    ICS Code

    ICS Number Code 75.080 (Petroleum products in general)

    UNSPSC Code

    UNSPSC Code 15101500(Petroleum and distillates)


    Referencing This Standard

    DOI: 10.1520/D5772-10

    ASTM International is a member of CrossRef.

    Citation Format

    ASTM D5772-10, Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method), ASTM International, West Conshohocken, PA, 2010, www.astm.org

    Back to Top