ASTM D5651 - 13

    Standard Test Method for Surface Bond Strength of Wood-Base Fiber and Particle Panel Materials

    Active Standard ASTM D5651 | Developed by Subcommittee: D07.03

    Book of Standards Volume: 04.10

      Format Pages Price  
    PDF 3 $37.00   ADD TO CART
    Hardcopy (shipping and handling) 3 $37.00   ADD TO CART
    Standard + Redline PDF Bundle 6 $44.40   ADD TO CART

    Significance and Use

    3.1 This test method provides a measure of the bond quality of the fibers, or particles, at the surface of wood-base fiber and particle panel materials including particleboard, medium-density fiberboard (MDF) and oriented strand board (OSB). Surface bond strength is a measure of the strength and resistance to delamination of the bond between overlay materials and panel surfaces and is an important consideration when these overlay materials, such as wood veneers, saturated papers, or plastic overlays, are to be bonded to the panel surface during secondary manufacturing.

    1. Scope

    1.1 This test method is a measure of the cohesive bond strength of the fibers, or particles, on the surface of wood-base fiber and particle panels (for example, particleboard and medium-density fiberboard) in the direction perpendicular to the plane of the panel.

    1.1.1 To determine the internal cohesive bond strength of wood-base fiber and particle panels, use Section 11 of Test Methods D1037.

    1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

    1.3 This test method does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

    2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    ASTM Standards

    D1037 Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials

    E122 Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process

    ICS Code

    ICS Number Code 83.180 (Adhesives)

    UNSPSC Code

    UNSPSC Code 11122002(Particleboard); 14121505(Fiberboards)

    DOI: 10.1520/D5651

    ASTM International is a member of CrossRef.

    ASTM D5651

    Citing ASTM Standards
    Back to Top