WITHDRAWN, NO REPLACEMENT
| ||Format||Pages||Price|| |
|3||$46.80||  ADD TO CART|
This performance specification covers woven fabrics comprised of any textile fiber or mixture of fibers, to be used in men's and boys' coveralls, dungarees, overalls, and shop-coats.
Formerly under the jurisdiction of Committee D13 on Textiles and the direct responsibility of Subcommittee D13.61 on Apparel, this performance specification was withdrawn in January 2011 in accordance with section 10.5.3.1 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.
1.1 This performance specification covers woven fabrics comprised of any textile fiber or mixture of fibers, to be used in men's and boys' coveralls, dungarees, overalls, and shop-coats.
1.2 These requirements apply to both the length and width directions for those properties where fabric direction is pertinent.
1.3 This performance specification is not applicable to woven fabrics used for interlinings and industrial-protective clothing.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
D123 Terminology Relating to Textiles
D434 Test Method for Resistance to Slippage of Yarns in Woven Fabrics Using a Standard Seam
D1424 Test Method for Tear Resistance of Woven Fabrics by Falling-Pendulum (Elmendorf) Apparatus
D2261 Test Method for Tearing Strength of Woven Fabrics by the Tongue (Single Rip) Method (Constant-Rate-of-Extension Tensile Testing Machine)
D2262 Test Method for Tearing Strength of Woven Fabrics by the Tongue (Single Rip) Method (Constant-Rate-of-Traverse Tensile Testing Machine)
D2724 Test Methods for Bonded, Fused, and Laminated Apparel Fabrics
D2905 Practice for Statements on Number of Specimens for Textiles
D5034 Test Method for Breaking Force and Elongation of Textile Fabrics (Grab Test)
AATCC Test MethodsEvaluation Procedure No. 3 AATCC Chromatic Transference Scale
Federal Standard16 CFR, Chapter II-Consumer Product Safety Commission, Subchapter D--Flammable Fabrics Act Regulations
Military StandardMIL-STD-105D Sampling Procedure and Tables for Inspection by Attributes
|Link to Active (This link will always route to the current Active version of the standard.)|
ASTM D4109-02, Standard Performance Specification for Men's and Boys' Woven Coverall, Dungaree, Overall, and Shop-Coat Fabrics (Withdrawn 2011), ASTM International, West Conshohocken, PA, 2002, www.astm.orgBack to Top