ASTM D3909 / D3909M - 97b(2012)e1

    Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced With Mineral Granules

    Active Standard ASTM D3909 / D3909M | Developed by Subcommittee: D08.04

    Book of Standards Volume: 04.04


    Buy Standard (PDF)
    2 pages
    $37.00
    Buy Standard (Print)
    2 pages
    $37.00
    Buy Standard + Redline (PDF)
    4 pages
    $44.40

    Historical (view previous versions of standard)


    ASTM D3909 / D3909M

    Abstract

    This specification covers asphalt-impregnated and coated glass felt roll roofing surfaced on the weather side with mineral granules, for use as a cap sheet in the construction of built-up roofs. The glass felt shall be a thin porous sheet composed predominately of fine glass fibers uniformly deposited in a nonwoven pattern. It shall contain a water-insoluble agent and may be reinforced with random, or parallel oriented glass yarns, or both, which may be gathered or twisted, bonded or unbonded. The products shall meet physical property requirements as to pliability, mass loss and behavior on heating, moisture, and dimensions (width, mass, and area).

    This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

    1. Scope

    1.1 This specification covers asphalt-impregnated and coated glass felt roll roofing surfaced on the weather side with mineral granules, for use as a cap sheet in the construction of built-up roofs.

    1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.


    2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    ASTM Standards

    D228 Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing

    D1079 Terminology Relating to Roofing and Waterproofing


    ICS Code

    ICS Number Code 91.100.50 (Binders. Sealing materials)

    UNSPSC Code

    UNSPSC Code 30121601(Asphalt); 30151501(Roll roofing)


    DOI: 10.1520/D3909_D3909M-97BR12E01

    ASTM International is a member of CrossRef.

    ASTM D3909 / D3909M

    Citing ASTM Standards
    Back to Top