Abstract
This specification covers synthetic primary amyl acetate (98 % grade). The apparent specific gravity, color property, distillation range, water property, acidity, and ester value shall be tested to meet the requirements prescribed.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
1. Scope
1.1 This specification covers synthetic primary amyl acetate (98 % grade).
1.2 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4 For specific hazard information and guidance, see the supplier's Material Safety Data Sheet for material listed in this specification.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) 
The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
D268 Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material
D1078 Test Method for Distillation Range of Volatile Organic Liquids
D1209 Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
D1364 Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)
D1476 Test Method for Heptane Miscibility of Lacquer Solvents
D1613 Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
D1617 Test Method for Ester Value of Solvents and Thinners
D4052 Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
D5386 Test Method for Color of Liquids Using Tristimulus Colorimetry
E1 Specification for ASTM Liquid-in-Glass Thermometers
E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E300 Practice for Sampling Industrial Chemicals
U.S. Federal Specification
PPP-C-2020 Chemicals, Liquid, Dry, and Paste: Packaging of Available from Standardization Documents Order Desk, DODSSP, Bldg. 4, Section D, 700 Robbins Ave., Philadelphia, PA 19111-5098, http://dodssp.daps.dla.mil.
Keywords
amyl acetate; ester; solvent;
ICS Code
ICS Number Code 87.060.30 (Solvents)
DOI: 10.1520/D3540-12
ASTM International is a member of CrossRef.
Citing ASTM Standards
[Back to Top]
