Developed by Subcommittee: D06.92
WITHDRAWN, NO REPLACEMENT
This specification covers copies from office copying machines where the copied material is expected to have maximum or substantial life expectancy.
Formerly under the jurisdiction of Committee D06 on Paper and Paper Products, this specification was withdrawn in August 2010 due to a lack of interest in properties-based specifications for paper.
1.1 This specification covers copies from office copying machines where the copied material is expected to have maximum or substantial life expectancy.
1.2 This specification is divided into two parts, paper and imaged copy. The parts appear as follows:
1.3 Part 1 describes the procurement process for obtaining paper that will have the proper life expectancy for the intended purpose.
1.4 Part 2 describes a procedure for estimating the durability of the image on copy from an office copying machine.
1.5 As indicated in Appendix and , this specification may be used as a guide.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
D585 Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Product
D1030 Test Method for Fiber Analysis of Paper and Paperboard
D1968 Terminology Relating to Paper and Paper Products
D3424 Practice for Evaluating the Relative Lightfastness and Weatherability of Printed Matter
D4714 Test Method for Determination of Effect of Moist Heat (50 % Relative Humidity and 90C) on Properties of Paper and Board
D4988 Test Method for Determination of Alkalinity of Paper as Calcium Carbonate (Alkaline Reserve of Paper)
D5625 Test Method for Measuring Length, Width, and Squareness of Sheeted Paper and Paper Products
D5634 Guide for Selection of Permanent and Durable Offset and Book Papers
F1319 Test Method for Determination of Abrasion and Smudge Resistance of Images Produced from Business Copy Products (Crockmeter Method)
TAPPI StandardsT544 Effect of Moist Heat on Properties of Paper and Board
ISO StandardISO9706 Paper for Documents--Specifications for Permanence--Normative Annex--Special instructions for determining kappa number