ASTM D330 - 07(2013)

    Standard Specification for 2-Butoxyethanol

    Active Standard ASTM D330 | Developed by Subcommittee: D01.35

    Book of Standards Volume: 06.04


      Format Pages Price  
    PDF 2 $37.00   ADD TO CART
    Hardcopy (shipping and handling) 2 $37.00   ADD TO CART


    Abstract

    This specification covers the properties and requirements for 2-butoxyethanol. Specimens shall be suitably sampled and tested, and shall meet specified values of the following properties: apparent specific gravity; color (Pt-Co scale); distillation range (initial boiling point and dry point); water content; and acidity (free acid as acetic acid).

    This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

    1. Scope

    1.1 This specification covers 2-butoxyethanol.

    1.2 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.

    1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

    1.4 For specific hazard information and guidance, see the supplier's Material Safety Data Sheet for materials listed in this specification.


    2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    ASTM Standards

    D268 Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material

    D1078 Test Method for Distillation Range of Volatile Organic Liquids

    D1209 Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)

    D1364 Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)

    D1613 Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products

    D4052 Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter

    D5386 Test Method for Color of Liquids Using Tristimulus Colorimetry

    E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

    E300 Practice for Sampling Industrial Chemicals

    U.S. Federal Standard

    PPP-C-2020 Specification for Packaging of Chemicals, Liquid, Dry, and Paste Available from Standardization Documents Order Desk, DODSSP, Bldg. 4, Section D, 700 Robbins Ave., Philadelphia, PA 19111-5098, http://www.dodssp.daps.mil.


    ICS Code

    ICS Number Code 71.080.60 (Alcohols. Ethers)

    UNSPSC Code

    UNSPSC Code 12352121(Organic hydroxides)


    DOI: 10.1520/D0330

    ASTM International is a member of CrossRef.

    ASTM D330

    Citing ASTM Standards
    Back to Top