ASTM D2689-88(1999)

    Standard Practices for Testing Alkyd Resins (Withdrawn 2008)

    Withdrawn Standard: ASTM D2689-88(1999) | Developed by Subcommittee: D01.33

    WITHDRAWN, NO REPLACEMENT


      Format Pages Price  
    PDF 3 $45.60   ADD TO CART


    Withdrawn Rationale:

    Formerly under the jurisdiction of Committee D01 on Paint and Related Coatings, Materials, and Applications, this practice was withdrawn in January 2008 in accordance with section 10.5.3.1 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.

    1. Scope

    1.1 These practices cover test methods for testing alkyd resins as listed in Table 1. They are the test methods most often used to characterize alkyds. All of the analytical test methods were subjected to interlaboratory testing using oil-modified alkyds. Their adaptability to other types of alkyds has not been studied. Although each test method specifies a recommended amount of specimen for starting a separate analysis, several of the procedures can be conducted on the same starting specimen, if desired. For example, the tests for unsaponifiable matter, fatty acid content, oil identification, and phthalic acid content could all be run on a consecutive basis, if all were required.



    Referencing This Standard

    DOI: 10.1520/D2689-88R99

    ASTM International is a member of CrossRef.

    Citation Format

    ASTM D2689-88(1999), Standard Practices for Testing Alkyd Resins (Withdrawn 2008), ASTM International, West Conshohocken, PA, 1999, www.astm.org

    Back to Top