ASTM D2634 - 07(2013)

    Standard Specification for Methyl Amyl Acetate (95 % Grade)

    Active Standard ASTM D2634 | Developed by Subcommittee: D01.35

    Book of Standards Volume: 06.04


      Format Pages Price  
    PDF 2 $38.00   ADD TO CART
    Hardcopy (shipping and handling) 2 $38.00   ADD TO CART


    Abstract

    This specification covers methyl amyl acetate2 (95 % grade) for use in paint, varnish, and related products. The apparent specific gravity, color property, distillation range, non-volatile matter, odor property, water property, acidity, and ester value shall be tested to meet the requirements prescribed.

    This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

    1. Scope

    1.1 This specification covers methyl amyl acetate2 (95 % grade) for use in paint, varnish, and related products.

    1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

    1.3 For specific hazard information and guidance, see the supplier's Material Safety Data Sheet for materials listed in this specification.

    1.4 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.


    2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    ASTM Standards

    D268 Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material

    D1078 Test Method for Distillation Range of Volatile Organic Liquids

    D1209 Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)

    D1296 Test Method for Odor of Volatile Solvents and Diluents

    D1353 Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products

    D1364 Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)

    D1476 Test Method for Heptane Miscibility of Lacquer Solvents

    D1613 Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products

    D1617 Test Method for Ester Value of Solvents and Thinners

    D4052 Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter

    D5386 Test Method for Color of Liquids Using Tristimulus Colorimetry

    E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

    E300 Practice for Sampling Industrial Chemicals

    U.S. Federal Specification

    PPP-C-2020 Packaging of Chemicals, Liquid, Dry, and Paste Available from Standardization Documents Order Desk, DODSSP, Bldg. 4, Section D, 700 Robbins Ave., Philadelphia, PA 19111-5098, http://www.dodssp.daps.mil.


    ICS Code

    ICS Number Code 87.060.30 (Solvents)

    UNSPSC Code

    UNSPSC Code 13101717(Polyester urethane AU)


    Referencing This Standard

    DOI: 10.1520/D2634

    ASTM International is a member of CrossRef.

    Citation Format

    ASTM D2634-07(2013), Standard Specification for Methyl Amyl Acetate (95 % Grade), ASTM International, West Conshohocken, PA, 2013, www.astm.org

    Back to Top