ASTM D2518-99(2004)

    Standard Specification for Woven Glass Fabrics for Electrical Insulation (Withdrawn 2013)

    Withdrawn Standard: ASTM D2518-99(2004) | Developed by Subcommittee: D09.07

    WITHDRAWN, NO REPLACEMENT


      Format Pages Price  
    PDF 3 $45.60   ADD TO CART


    Formerly under the jurisdiction of Committee D09 on Electrical and Electronic Insulating Materials, this practice was withdrawn in January 2013 in accordance with section 10.5.3.1 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.

    -->

    Withdrawn Rationale:

    This specification applies to straight-cut (as opposed to bias-cut) plain weave greige (unfinished) glass fabric produced from continuous-filament yarns and suitable for use in the production of coated or treated fabric for electrical insulating purposes.

    Formerly under the jurisdiction of Committee D09 on Electrical and Electronic Insulating Materials, this practice was withdrawn in January 2013 in accordance with section 10.5.3.1 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.

    1. Scope

    1.1 This specification applies to straight-cut (as opposed to bias-cut) plain weave greige (unfinished) glass fabric produced from continuous-filament yarns and suitable for use in the production of coated or treated fabric for electrical insulating purposes.

    1.2 Excluded from this specification are woven glass fabric tapes and fabrics intended for use primarily in laminated constructions.

    1.3 The values stated in inch-pound units are to be regarded as the standard. The values in parentheses are for information only.



    2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    ASTM Standards

    D123 Terminology Relating to Textiles

    D578 Specification for Glass Fiber Strands

    D1711 Terminology Relating to Electrical Insulation

    D1777 Test Method for Thickness of Textile Materials

    D1931 Specification for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation

    D3636 Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials

    D3773 Test Methods for Length of Woven Fabric

    D3774 Test Method for Width of Textile Fabric

    D3775 Test Method for Warp (End) and Filling (Pick) Count of Woven Fabrics

    D3776 Test Methods for Mass Per Unit Area (Weight) of Fabric

    D4029 Specification for Finished Woven Glass Fabrics

    D4963 Test Method for Ignition Loss of Glass Strands and Fabrics

    D5035 Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method)


    Referencing This Standard

    DOI: 10.1520/D2518-99R04

    ASTM International is a member of CrossRef.

    Citation Format

    ASTM D2518-99(2004), Standard Specification for Woven Glass Fabrics for Electrical Insulation (Withdrawn 2013), ASTM International, West Conshohocken, PA, 1999, www.astm.org

    Back to Top