Standards

ASTM D2022 - 89(2008)


ASTM D2022 - 89(2008) Standard Test Methods of Sampling and Chemical Analysis of Chlorine-Containing Bleaches


Active Standard ASTM D2022 Developed by Subcommittee: D12.12 |Book of Standards Volume: 15.04

more info 9 pages $ 41.00
more info 9 pages $ 41.00

Historical (view previous versions of standard) ASTM License Agreement Shipping & Handling

More D12.12 Standards Related Products
Find Labs Copyright/Permissions Standard References

ASTM D2022

Abstract

These test methods detail the standard procedures for the sampling and chemical analysis of chlorine-containing bleaches including sodium hypochlorite (soda bleach) solutions, calcium hypochlorite, and chloroisocyanuric acids and their derived salts. Tests for sodium hypochlorite include the determination of available chlorine, sodium chlorate, total chorine, sodium chloride, total alkalinity as sodium oxide, and free alkali as sodium hydroxide. Tests for calcium hypochlorite, include the determination of available chlorine, and water. And finally, tests for chloroisocyanuric acids and their derived salts include the determination of available chlorine by iodometric-thiosulfate and arsenite-iodometric methods, and moisture.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope

1.1 These test methods cover the sampling and chemical analysis of chlorine-containing bleaches. The methods appear in the following order:

Sections
Sodium Hypochlorite (Soda Bleach) Solutions:
Sampling 5
Available Chlorine6-9
Sodium Chlorate10-14
Total Chlorine15-18
Sodium Chloride19 and 20
Total Alkalinity as Sodium Oxide (Na2O)21-24
Free Alkali as Sodium Hydroxide (NaOH)25-28
Calcium Hypochlorite:
Sampling30
Available Chlorine31-34
Water35-40
Chloroisocyanuric Acids and Their Derived Salts:
Sampling42
Available Chlorine (IodometricThiosulfate Method)43-46
Available Chlorine (ArseniteIodometric Method)47-50
Moisture51-54

1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Material Safety Data Sheets are available for reagents and materials. Review them for hazards prior to usage.


2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

D1193 Specification for Reagent Water



Keywords

bleaches; chlorine; hypochlorite; iodometric titrations; Acidity, alkalinity, pH--detergent materials; Alkalies content; Bleaches; Chemical analysis--cleaning (detergent) materials/applications; Chloride analysis--cleaning agents/detergents; Chlorine bleaches; Chlorine content; Detergent materials/systems--bleaches; Liquid chemicals; Sampling cleaning materials/applications; Sodium chlorate content; Sodium chloride content; Water content--chemicals;



ICS Code

ICS Number Code 71.100.99 (Other products of the chemical industry)



DOI: 10.1520/D2022-89R08

ASTM International is a member of CrossRef.


Citing ASTM Standards

[Back to Top]

Standards Tracker

Standards Subscriptions


Related Standards:
E256
D5384
D2522
D808
D6284
See All