Withdrawn Rationale:
These test methods cover the testing of methylcellulose.
Formerly under the jurisdiction of Committee D01 on Paint and Related Coatings, Materials, and Applications, these test methods were withdrawn in December 2003 in accordance with section 10.6.3.1 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.
1. Scope
1.1 These test methods cover the testing of methylcellulose.
1.2 The test methods appear in the following order:
Sections Moisture 4 and 5 Ash-as Sulfate 6 to 8 Chlorides-as Sodium Chloride 9 to 11 Alkalinity-as Na2CO3 12 to 14 Iron 15 to 19 Heavy Metals 20 to 22 Methoxyl Content 23 to 26 Viscosity: Water-Soluble Methylcellulose 27 to 29 Alkali-Soluble Methylcellulose 30 to 31 pH 32 Solids 33 to 34 Density 35 to 39 1.3 This standard does not purport to address the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.> For a specific hazard statement, see Note 1.
Keywords
Acidity, alkalinity, pH-paints/related coatings/materials; Ash-paints/related coatings/materials; Chloride content-paints/related coatings/materials; Density-paints/related coatings/materials; Iron content-paint driers; Methoxyl content; Moisture analysis-paints/related coatings/materials; Viscosity-paints/related coatings/materials; Water-insoluble matter content; methylcellulose, test,; Ball drop method; Cellulose and cellulose derivatives; Methylcellulose; methylcellulose, testing,; Heavy metals; heavy metals in methylcellulose, test;
DOI: 10.1520/D1347-72R95
ASTM International is a member of CrossRef.
Citing ASTM Standards
[Back to Top]
