Withdrawn Rationale:
This specification covers exterior gypsum soffit board, designed to be used for exterior soffits and carport ceilings that are completely protected from contact with liquid water.
Formerly under the jurisdiction of Committee C11 on Gypsum and Related Building Materials and Systems, this specification was withdrawn in December 2004 and replaced by Specification C 1396/C 1396M for Gypsum Board.
For referenced ASTM standards, visit the ASTM website, www.astm.org, or contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM Standards volume information, refer to the standard's Document Summary page on the ASTM website.
1. Scope
1.1 This specification covers exterior gypsum soffit board, designed to be used for exterior soffits and carport ceilings that are completely protected from contact with liquid water.
Note 1—Specification C 840 contains application procedures for exterior gypsum soffit board.
1.2 The values stated in either inch-pound units or SI (metric) are to be regarded separately as the standard. Within the text, the SI units are shown in brackets. The values stated in each system shall be used independently of the other. Values from the two systems shall not be combined.
1.3 The text of this standard references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.
Index Terms
exterior soffit; gypsum; gypsum board; gypsum soffit board; type X
DOI: 10.1520/C0931_C0931M-04E01
ASTM International is a member of CrossRef.
Citing ASTM Standards
[Back to Top]
