ASTM A809 - 08(2013)

    Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire

    Active Standard ASTM A809 | Developed by Subcommittee: A05.12

    Book of Standards Volume: 01.06


      Format Pages Price  
    PDF 3 $38.00   ADD TO CART
    Hardcopy (shipping and handling) 3 $38.00   ADD TO CART


    Abstract

    This specification covers soft, medium, and hard temper carbon steel wire coated with aluminum by a hot-dip process, supplied in coils for general use. The steel rod from which the wire is to be produced shall be manufactured by any commercially accepted steel making practice. The ingot or pig aluminum used for coating shall conform to impurity limits prescribed for copper and iron. The aluminum-coated wire shall meet the tensile strength, coating weight, and adherence requirements. Tensile and adhesion tests shall be performed.

    This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

    1. Scope

    1.1 This specification covers soft, medium, and hard temper carbon steel wire coated with aluminum by a hot-dip process, supplied in coils for general use.

    1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.


    2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    ASTM Standards

    A370 Test Methods and Definitions for Mechanical Testing of Steel Products

    A428/A428M Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles

    A700 Practices for Packaging, Marking, and Loading Methods for Steel Products for Shipment

    E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

    U.S. Military Standards

    MIL-STD-1188 Commercial Packaging of Supplies and Equipment

    MIL-STD-129 Marking for Shipment and Storage

    U.S. Federal Standard

    Fed.Std.No.123 Marking for Shipment (Civil Agencies)


    ICS Code

    ICS Number Code 77.140.65 (Steel wire, wir ropes and link chains)

    UNSPSC Code

    UNSPSC Code 31152206(Coated steel wire)


    Referencing This Standard

    DOI: 10.1520/A0809-08R13

    ASTM International is a member of CrossRef.

    Citation Format

    ASTM A809-08(2013), Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire, ASTM International, West Conshohocken, PA, 2013, www.astm.org

    Back to Top