Standards Search: A

AIIMASTM - BP-01-08 Portable Document Format-Healthcare (PDF) A Best Practices Guide

A1 - 00(2010) Standard Specification for Carbon Steel Tee Rails See all versions

A2 - 02(2008) Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types See all versions

A3 - 01(2012) Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated) See all versions

A6/A6M - 12 Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling See all versions

A20/A20M - 11 Standard Specification for General Requirements for Steel Plates for Pressure Vessels See all versions

A27/A27M - 10 Standard Specification for Steel Castings, Carbon, for General Application See all versions

A29/A29M - 12 Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for See all versions

A31 - 04(2009) Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels See all versions

A34/A34M - 06(2012) Standard Practice for Sampling and Procurement Testing of Magnetic Materials See all versions

A36/A36M - 08 Standard Specification for Carbon Structural Steel See all versions

A36/A36M-RUS - 08 Стандартные технические условия на углеродистую конструкционную сталь

A36/A36M-SP - 08 Especificación Normalizada para Acero al Carbono Estructural See all versions

A47/A47M - 99(2009) Standard Specification for Ferritic Malleable Iron Castings See all versions

A48/A48M - 03(2012) Standard Specification for Gray Iron Castings See all versions

A49 - 12 Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars See all versions

A53/A53M - 12 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless See all versions

A53/A53M-SP - 12 Especificación Normalizada para Tubos de Acero Negro e Inmersos en Caliente, Galvanizados, Soldados y Sin Costura See all versions

A65 - 07 Standard Specification for Steel Track Spikes See all versions

A66 - 07 Standard Specification for Steel Screw Spikes See all versions

A67 - 00(2010) Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked See all versions

A74 - 09 Standard Specification for Cast Iron Soil Pipe and Fittings See all versions

A82/A82M - 07 Standard Specification for Steel Wire, Plain, for Concrete Reinforcement See all versions

A82/A82M-RUS - 07 Стандартная спецификация на гладкую стальную проволоку для бетонной арматуры

A82/A82M-SP - 07 Especificación Normalizada para Alambre de Acero, Liso, para Refuerzo de Concreto

A90/A90M - 11 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings See all versions

A99 - 03(2009) Standard Specification for Ferromanganese See all versions

A100 - 07(2012) Standard Specification for Ferrosilicon See all versions

A101 - 04(2009) Standard Specification for Ferrochromium See all versions

A102 - 04(2009) Standard Specification for Ferrovanadium See all versions

A105/A105M - 11a Standard Specification for Carbon Steel Forgings for Piping Applications See all versions

A105/A105M-RUS - 11a Стандартная спецификация на стальные поковки из углеродистой стали, применяемые для трубопроводов See all versions

A106/A106M - 11 Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service See all versions

A106/A106M-RUS - 11 Стандартная спецификация на бесшовные трубы из углеродистой стали для применения при высоких температурах See all versions

A108 - 07 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished See all versions

A109/A109M - 08 Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled See all versions

A111 - 99a(2009) Standard Specification for Zinc-Coated (Galvanized) "Iron" Telephone and Telegraph Line Wire See all versions

A116 - 11 Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric See all versions

A121 - 07 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire See all versions

A123/A123M - 12 Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products See all versions

A125 - 96(2007) Standard Specification for Steel Springs, Helical, Heat-Treated See all versions

A126 - 04(2009) Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings See all versions

A128/A128M - 93(2012) Standard Specification for Steel Castings, Austenitic Manganese See all versions

A131/A131M - 08 Standard Specification for Structural Steel for Ships See all versions

A132 - 04(2009) Standard Specification for Ferromolybdenum See all versions

A134 - 96(2012) Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over) See all versions

A135/A135M - 09 Standard Specification for Electric-Resistance-Welded Steel Pipe See all versions

A139/A139M - 04(2010) Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over) See all versions

A143/A143M - 07 Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement See all versions

A144 - 04(2009) Specification for Ferrotungsten See all versions

A146 - 04(2009) Standard Specification for Molybdenum Oxide Products See all versions

A148/A148M - 08 Standard Specification for Steel Castings, High Strength, for Structural Purposes See all versions

A153/A153M - 09 Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware See all versions

A159 - 83(2011) Standard Specification for Automotive Gray Iron Castings See all versions

A167 - 99(2009) Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip See all versions

A176 - 99(2009) Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip See all versions

A178/A178M - 02(2012) Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes See all versions

A179/A179M - 90a(2012) Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes See all versions

A181/A181M - 12 Standard Specification for Carbon Steel Forgings, for General-Purpose Piping See all versions

A182/A182M - 12a Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service See all versions

A183 - 03(2009) Standard Specification for Carbon Steel Track Bolts and Nuts See all versions

A184/A184M - 06(2011) Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement See all versions

A185/A185M - 07 Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete See all versions

A185/A185M-RUS - 07 Стандартная спецификация на стальную сварную гладкую проволочную арматуру для бетона

A185/A185M-SP - 07 Especificación Normalizada para Refuerzo Electrosoldado de Alambre de Acero Liso, para Concreto See all versions

A192/A192M - 02(2012) Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service See all versions

A193/A193M - 12b Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications See all versions

A194/A194M - 12 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both See all versions

A197/A197M - 00(2011) Standard Specification for Cupola Malleable Iron See all versions

A203/A203M - 12 Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel See all versions

A204/A204M - 12 Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum See all versions

A209/A209M - 03(2012) Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes See all versions

A210/A210M - 02(2007) Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes See all versions

A213/A213M - 11a Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes See all versions

A213/A213M-RUS - 11a Стандартная спецификация на бесшовные трубы из ферритной и аустенитной легированной стали для котлов, пароперегревателей и теплообменников See all versions

A214/A214M - 96(2012) Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes See all versions

A216/A216M - 08 Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service See all versions

A216/A216M-RUS - 08 Стандартные технические условия на отливки из углеродистой стали, подходящие для сварки оплавлением, для эксплуатации в условиях высоких температур See all versions

A217/A217M - 11 Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service See all versions

A217/A217M-RUS - 11 Стандартные технические условия на отливки из мартенситной нержавеющей и легированной стали для деталей под давлением для эксплуатации в условиях высоких температуры

A220/A220M - 99(2009) Standard Specification for Pearlitic Malleable Iron See all versions

A225/A225M - 12 Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel See all versions

A227/A227M - 06(2011) Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs See all versions

A228/A228M - 07 Standard Specification for Steel Wire, Music Spring Quality See all versions

A229/A229M - 12 Standard Specification for Steel Wire, Quenched and Tempered for Mechanical Springs See all versions

A230/A230M - 05(2011)e1 Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality See all versions

A231/A231M - 10 Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire See all versions

A232/A232M - 05(2011)e1 Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire See all versions

A234/A234M - 11a Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service See all versions

A239 - 95(2009)e1 Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles See all versions

A240/A240M - 12a Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications See all versions

A242/A242M - 04(2009) Standard Specification for High-Strength Low-Alloy Structural Steel See all versions

A242/A242M-SP - 04(2009) Especificación Normalizada para Acero Estructural de Alta Resistencia y Baja Aleación See all versions

A247 - 10 Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings See all versions

A249/A249M - 10a Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes See all versions

A250/A250M - 05(2009) Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes See all versions

A252 - 10 Standard Specification for Welded and Seamless Steel Pipe Piles See all versions

A254 - 97(2007) Standard Specification for Copper-Brazed Steel Tubing See all versions

A255 - 10 Standard Test Methods for Determining Hardenability of Steel See all versions

A255-RUS - 10 Стандартные методы определения закаливаемости стали

A262 - 10 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels See all versions

A262-RUS - 10 Стандартные методики выявления склонности к межкристаллитной коррозии аустенитных нержавеющих сталей

A263 - 09 Standard Specification for Stainless Chromium Steel-Clad Plate See all versions

A264 - 11 Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate See all versions

A264-RUS - 11 Стандартные технические условия на нержавеющую плакированную хромоникелевую толстолистовую сталь

A265 - 09 Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate See all versions

A266/A266M - 11 Standard Specification for Carbon Steel Forgings for Pressure Vessel Components See all versions

A268/A268M - 10 Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service See all versions

A269 - 10 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service See all versions

A270/A270M - 10 Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing See all versions

A275/A275M - 08 Standard Practice for Magnetic Particle Examination of Steel Forgings See all versions

A276 - 10 Standard Specification for Stainless Steel Bars and Shapes See all versions

A276-RUS - 10 Стандартные технические условия на прутки и профили из нержавеющей стали

A278/A278M - 01(2011) Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C) See all versions

A283/A283M - 12 Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates See all versions

A285/A285M - 12 Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength See all versions

A285/A285M-RUS - 12 Стандартные технические условия на плиты для сосудов под давлением из углеродистой стали с низким и средним пределом прочности на растяжение

A288 - 91(2008) Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators See all versions

A289/A289M - 97(2008) Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators See all versions

A290/A290M - 05(2010) Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears See all versions

A291/A291M - 05(2010) Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears See all versions

A295/A295M - 09 Standard Specification for High-Carbon Anti-Friction Bearing Steel See all versions

A297/A297M - 10 Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application See all versions

A299/A299M - 09 Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon See all versions

A302/A302M - 12 Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel See all versions

A304 - 11 Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements See all versions

A307 - 10 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength See all versions

A307-RUS - 10 Стандартные технические условия на болты и шпильки из углеродистой стали с пределом прочности на растяжение 60 000 фунт/кв. дюйм

A307-SP - 10 Especificación Normalizada para Tornillos y Pernos de Acero al Carbono, con 60 000 PSI de Resistencia a la Tracción

A308/A308M - 10 Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process See all versions

A309 - 01(2012) Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test See all versions

A311/A311M - 04(2010) Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements See all versions

A312/A312M - 12 Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes See all versions

A312/A312M-RUS - 12 Стандартная спецификация на бесшовные сварные и прошедшие интенсивную холодную обработку трубы из аустенитной нержавеющей стали See all versions

A313/A313M - 10e1 Standard Specification for Stainless Steel Spring Wire See all versions

A314 - 08 Standard Specification for Stainless Steel Billets and Bars for Forging See all versions

A319 - 71(2011) Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts See all versions

A320/A320M - 11a Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service See all versions

A320/A320M-RUS - 11a Стандартные технические условия на болтовые соединения из легированной и нержавеющей стали для эксплуатации в условиях низких температур See all versions

A322 - 07 Standard Specification for Steel Bars, Alloy, Standard Grades See all versions

A322-RUS - 07 Стандартная спецификация на прутки из легированных сталей стандартных сортов

A323 - 05(2010) Standard Specification for Ferroboron See all versions

A324 - 08 Standard Specification for Ferrotitanium See all versions

A325M - 09 Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric] See all versions

A325 - 10 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength See all versions

A327/A327M - 11 Standard Test Methods for Impact Testing of Cast Irons See all versions

A328/A328M - 07(2012) Standard Specification for Steel Sheet Piling See all versions

A333/A333M - 11 Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service See all versions

A333/A333M-RUS - 11 Стандартные технические условия на бесшовные и сварные стальные трубы, используемые в условиях низких температур

A334/A334M - 04a(2010) Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service See all versions

A334/A334M-RUS - 04a(2010) Cтандартная спецификация на бесшовные и сварные трубы из углеродистой и легированной стали для использования при низких температурах

A335/A335M - 11 Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service See all versions

A335/A335M-RUS - 11 Стандартная спецификация на бесшовные трубы из ферритной легированной стали для высокотемпературных условий эксплуатации See all versions

A336/A336M - 10a Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts See all versions

A338 - 84(2009) Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C) See all versions

A340 - 03a(2011) Standard Terminology of Symbols and Definitions Relating to Magnetic Testing See all versions

A341/A341M - 00(2011)e1 Standard Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods See all versions

A342/A342M - 04(2012) Standard Test Methods for Permeability of Feebly Magnetic Materials See all versions

A343/A343M - 03(2008) Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame See all versions

A345 - 09 Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications See all versions

A348/A348M - 05(2011) Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame See all versions

A350/A350M - 12 Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components See all versions

A350/A350M-RUS - 12 Стандартная спецификация на поковки из углеродистой и низколегированной стали, требующие испытаний на ударную вязкость для деталей трубопровода See all versions

A351/A351M - 12b Standard Specification for Castings, Austenitic, for Pressure-Containing Parts See all versions

A352/A352M - 06(2012) Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service See all versions

A353/A353M - 09 Standard Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9 % Nickel See all versions

A354 - 11 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners See all versions

A355 - 89(2012) Standard Specification for Steel Bars, Alloys, for Nitriding See all versions

A356/A356M - 11 Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines See all versions

A358/A358M - 08a Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications See all versions

A358/A358M-RUS - 08a Стандартные технические условия на трубы, полученные сваркой плавлением, из аустенитной хром-никелевой нержавеющей стали для эксплуатации при повышенных температурах и общего назначения See all versions

A363 - 03(2009)e1 Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand See all versions

A367 - 11 Standard Test Methods of Chill Testing of Cast Iron See all versions

A368 - 95a(2009) Standard Specification for Stainless Steel Wire Strand See all versions

A369/A369M - 11 Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service See all versions

A370 - 12a Standard Test Methods and Definitions for Mechanical Testing of Steel Products See all versions

A372/A372M - 12 Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels See all versions

A376/A376M - 12 Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service See all versions

A377 - 03(2008)e1 Standard Index of Specifications for Ductile-Iron Pressure Pipe See all versions

A380 - 06 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems See all versions

A381 - 96(2012) Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems See all versions

A384/A384M - 07 Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies See all versions

A385/A385M - 11 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip) See all versions

A387/A387M - 11 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum See all versions

A388/A388M - 11 Standard Practice for Ultrasonic Examination of Steel Forgings See all versions

A388/A388M-RUS - 11 Стандартное практическое руководство по ультразвуковой дефектоскопии стальных поковок

A389/A389M - 10 Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service See all versions

A390 - 06(2011) Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line) See all versions

A391/A391M - 07(2012) Standard Specification for Grade 80 Alloy Steel Chain See all versions

A392 - 11a Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric See all versions

A394 - 08e1 Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare See all versions

A395/A395M - 99(2009) Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures See all versions

A400 - 69(2012) Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties See all versions

A401/A401M - 10 Standard Specification for Steel Wire, Chromium-Silicon Alloy See all versions

A403/A403M - 12 Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings See all versions

A407 - 07 Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs See all versions

A409/A409M - 09 Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service See all versions

A411 - 08 Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire See all versions

A413/A413M - 07(2012) Standard Specification for Carbon Steel Chain See all versions

A414/A414M - 10 Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels See all versions

A416/A416M - 12a Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete See all versions

A418/A418M - 10 Standard Practice for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings See all versions

A420/A420M - 10a Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service See all versions

A420/A420M-RUS - 10a Стандартные технические условия на трубные фитинги из кованой углеродистой и легированной стали для эксплуатации в условиях низких температур

A421/A421M - 10 Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete See all versions

A421/A421M-SP - 10 Alambre de Acero Aliviado de Esfuerzos sin Recubrimiento para Concreto Preesforzado See all versions

A423/A423M - 09 Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes See all versions

A424/A424M - 09a Standard Specification for Steel, Sheet, for Porcelain Enameling See all versions

A426/A426M - 11a Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service See all versions

A427/A427M - 10 Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction See all versions

A428/A428M - 10 Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles See all versions

A434 - 06(2012) Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered See all versions

A435/A435M - 90(2012) Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates See all versions

A435/A435M-RUS - 90(2012) Стандартные технические условия на ультразвуковое испытание стальных плит методом прямого преобразователя See all versions

A436 - 84(2011) Standard Specification for Austenitic Gray Iron Castings See all versions

A437/A437M - 12 Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service See all versions

A439 - 83(2009) Standard Specification for Austenitic Ductile Iron Castings See all versions

A447/A447M - 11 Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service See all versions

A449 - 10 Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use See all versions

A450/A450M - 10 Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes See all versions

A451/A451M - 06(2010) Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service See all versions

A453/A453M - 12 Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels See all versions

A455/A455M - 12 Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese See all versions

A456/A456M - 08 Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings See all versions

A459 - 08 Standard Specification for Zinc-Coated Flat Steel Armoring Tape See all versions

A460 - 11 Standard Specification for Copper-Clad Steel Wire Strand See all versions

A463/A463M - 10 Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process See all versions

A466/A466M - 07(2012) Standard Specification for Weldless Chain See all versions

A467/A467M - 07(2012) Standard Specification for Machine and Coil Chain See all versions

A469/A469M - 07(2012) Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors See all versions

A470/A470M - 05(2010) Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts See all versions

A471/A471M - 09 Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels See all versions

A472/A472M - 07(2012) Standard Specification for Heat Stability of Steam Turbine Shafts and Rotor Forgings See all versions

A473 - 01(2009) Standard Specification for Stainless Steel Forgings See all versions

A474 - 03(2008) Standard Specification for Aluminum-Coated Steel Wire Strand See all versions

A475 - 03(2009)e1 Standard Specification for Zinc-Coated Steel Wire Strand See all versions

A476/A476M - 00(2009) Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls See all versions

A478 - 97(2008) Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire See all versions

A479/A479M - 12 Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels See all versions

A480/A480M - 12 Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip See all versions

A480/A480M-RUS - 12 Стандартная спецификация на общие требования к плитам, листам и полосам, катанным из нержавеющей и жаропрочной стали

A481 - 05(2010) Standard Specification for Chromium Metal See all versions

A482/A482M - 11 Standard Specification for Ferrochrome-Silicon See all versions

A483/A483M - 10 Standard Specification for Silicomanganese See all versions

A484/A484M - 11 Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings See all versions

A484/A484M-RUS - 11 Стандартные технические условия на общие требования для прутков, цилиндрических заготовок и поковок из нержавеющей стали See all versions

A485 - 09 Standard Specification for High Hardenability Antifriction Bearing Steel See all versions

A487/A487M - 93(2012) Standard Specification for Steel Castings Suitable for Pressure Service See all versions

A488/A488M - 10 Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel See all versions

A489 - 12 Standard Specification for Carbon Steel Lifting Eyes See all versions

A490 - 12 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength See all versions

A490M - 12 Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric) See all versions

A491 - 11 Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric See all versions

A492 - 95(2009) Standard Specification for Stainless Steel Rope Wire See all versions

A493 - 09 Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging See all versions

A494/A494M - 12 Standard Specification for Castings, Nickel and Nickel Alloy See all versions

A495 - 06(2010) Standard Specification for Calcium-Silicon Alloys See all versions

A496/A496M - 07 Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement See all versions

A497/A497M - 07 Standard Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete See all versions

A497/A497M-SP - 07 Especificación Normalizada para Refuerzo Electrosoldado de Alambre de Acero, Corrugado, para Concreto

A498 - 06 Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins See all versions

A499 - 89(2008) Standard Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails See all versions

A500/A500M - 10a Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes See all versions

A500/A500M-RUS - 10a Стандартные технические условия на холодногнутые, сварные и бесшовные круглые и профильные конструкционные трубы из углеродистой стали

A500/A500M-SP - 10a Especificación Normalizada para Tubos Estructurales de Acero al Carbono Conformados en Frío, Electrosoldados y sin Costura, de forma Circular y no Circular See all versions

A501 - 07 Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing See all versions

A501-SP - 07 Especificación Normalizada para Tubos Estructurales de Acero al Carbono Conformados en Caliente, Electrosoldados y sin Costura

A502 - 03(2009) Standard Specification for Rivets, Steel, Structural See all versions

A503/A503M - 01(2011) Standard Specification for Ultrasonic Examination of Forged Crankshafts See all versions

A504/A504M - 08 Standard Specification for Wrought Carbon Steel Wheels See all versions

A505 - 12 Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for See all versions

A506 - 12 Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled See all versions

A507 - 12 Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled See all versions

A508/A508M - 05b(2010) Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels See all versions

A510/A510M - 11 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel See all versions

A511/A511M - 12 Standard Specification for Seamless Stainless Steel Mechanical Tubing See all versions

A512 - 06(2012) Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing See all versions

A513/A513M - 12 Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing See all versions

A514/A514M - 05(2009) Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding See all versions

A515/A515M - 10 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service See all versions

A516/A516M - 10 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service See all versions

A516/A516M-RUS - 10 Стандартная спецификация на толстолистовую углеродистую сталь для сосудов, работающих под давлением для применения при умеренных и низких температурах See all versions

A517/A517M - 10 Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered See all versions

A518/A518M - 99(2012) Standard Specification for Corrosion-Resistant High-Silicon Iron Castings See all versions

A519 - 06(2012) Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing See all versions

A521/A521M - 06(2011) Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use See all versions

A522/A522M - 11 Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service See all versions

A523 - 96(2012) Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits See all versions

A524 - 96(2012) Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures See all versions

A529/A529M - 05(2009) Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality See all versions

A529/A529M-RUS - 05(2009) Стандартные технические условия на высокопрочную марганцево-углеродистую сталь конструкционного качества

A530/A530M - 12 Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe See all versions

A531/A531M - 12 Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings See all versions

A532/A532M - 10 Standard Specification for Abrasion-Resistant Cast Irons See all versions

A533/A533M - 09e1 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel See all versions

A534 - 09 Standard Specification for Carburizing Steels for Anti-Friction Bearings See all versions

A534-RUS - 09 Стандартная спецификация на науглероживание сталей для антифрикционных вкладышей подшипников

A536 - 84(2009) Standard Specification for Ductile Iron Castings See all versions

A537/A537M - 08 Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel See all versions

A540/A540M - 11 Standard Specification for Alloy-Steel Bolting for Special Applications See all versions

A541/A541M - 05(2010) Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components See all versions

A542/A542M - 09 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium See all versions

A542/A542M-RUS - 09 Стандартные технические условия на плиты для сосудов под давлением, закаленные и отпущенные, из стали, легированной хромом и молибденом и хромом, молибденом и ванадием

A543/A543M - 09 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum See all versions

A550 - 06(2010) Standard Specification for Ferrocolumbium See all versions

A551/A551M - 08 Standard Specification for Carbon Steel Tires for Railway and Rapid Transit Applications See all versions

A553/A553M - 10 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel See all versions

A554 - 11 Standard Specification for Welded Stainless Steel Mechanical Tubing See all versions

A555/A555M - 05(2009) Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods See all versions

A556/A556M - 96(2012) Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes See all versions

A560/A560M - 11 Standard Specification for Castings, Chromium-Nickel Alloy See all versions

A561 - 08 Standard Practice for Macroetch Testing of Tool Steel Bars See all versions

A561-RUS - 08 Стандартная методика контроля макроструктуры травлением для сортового проката из инструментальной стали

A562/A562M - 10 Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings See all versions

A563 - 07a Standard Specification for Carbon and Alloy Steel Nuts See all versions

A563M - 07 Standard Specification for Carbon and Alloy Steel Nuts [Metric] See all versions

A564/A564M - 10 Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes See all versions

A565/A565M - 10 Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service See all versions

A568/A568M - 11b Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for See all versions

A571/A571M - 01(2011) Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service See all versions

A572/A572M - 12 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel See all versions

A572/A572M-RUS - 12 Стандартные технические условия на высокопрочную низколегированную ниобиево-ванадиевую конструкционную сталь See all versions

A572/A572M-SP - 12 Especificación Normalizada para Acero Estructural de Alta Resistencia de Baja Aleación de Columbio-Vanadio See all versions

A573/A573M - 05(2009) Standard Specification for Structural Carbon Steel Plates of Improved Toughness See all versions

A574 - 12 Standard Specification for Alloy Steel Socket-Head Cap Screws See all versions

A574M - 12 Standard Specification for Alloy Steel Socket-Head Cap Screws (Metric) See all versions

A575 - 96(2007) Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades See all versions

A575-RUS - 96(2007) Стандартные технические условия на прутки из коммерческой углеродистой стали М-марок

A576 - 90b(2012) Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality See all versions

A577/A577M - 90(2012) Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates See all versions

A578/A578M - 07(2012) Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications See all versions

A579/A579M - 04a(2009) Standard Specification for Superstrength Alloy Steel Forgings See all versions

A579/A579M-RUS - 04a(2009) Стандартная спецификация на поковки из сверхпрочной легированной стали

A580/A580M - 12a Standard Specification for Stainless Steel Wire See all versions

A581/A581M - 95b(2009) Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods See all versions

A582/A582M - 12e1 Standard Specification for Free-Machining Stainless Steel Bars See all versions

A586 - 04a(2009)e1 Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand See all versions

A587 - 96(2012) Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry See all versions

A588/A588M - 10 Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance See all versions

A588/A588M-SP - 10 Especificación Normalizada para Acero Estructural de Alta Resistencia y Baja Aleación, con Punto Mínimo de Fluencia de hasta 50 ksi [345 MPa], con Resistencia a la Corrosión Atmosférica See all versions

A589/A589M - 06(2012) Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe See all versions

A592/A592M - 10 Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels See all versions

A595/A595M - 11 Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use See all versions

A596/A596M - 95(2009)e1 Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens See all versions

A597 - 87(2010) Standard Specification for Cast Tool Steel See all versions

A598/A598M - 02(2007) Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores See all versions

A599/A599M - 07(2012) Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet See all versions

A600 - 92a(2010) Standard Specification for Tool Steel High Speed See all versions

A601/A601M - 10 Standard Specification for Electrolytic Manganese Metal See all versions

A602 - 94(2009) Standard Specification for Automotive Malleable Iron Castings See all versions

A603 - 98(2009)e1 Standard Specification for Zinc-Coated Steel Structural Wire Rope See all versions

A604/A604M - 07(2012) Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets See all versions

A606/A606M - 09a Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance See all versions

A608/A608M - 12 Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures See all versions

A609/A609M - 12 Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof See all versions

A610 - 79(2009) Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size See all versions

A612/A612M - 12 Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service See all versions

A615/A615M - 12 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement See all versions

A615/A615M-SP - 12 Especificación Normalizada para Barras de Acero al Carbono Lisas y Corrugadas para Refuerzo de Concreto See all versions

A618/A618M - 04(2010) Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing See all versions

A623 - 11 Standard Specification for Tin Mill Products, General Requirements See all versions

A623M - 11 Standard Specification for Tin Mill Products, General Requirements [Metric] See all versions

A624/A624M - 03(2008)e1 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced See all versions

A625/A625M - 08 Standard Specification for Tin Mill Products, Black Plate, Single-Reduced See all versions

A626/A626M - 03(2008)e1 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced See all versions

A627 - 03(2011) Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities See all versions

A630 - 03(2009) Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate See all versions

A632 - 04(2009) Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service See all versions

A633/A633M - 01(2011) Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates See all versions

A633/A633M-RUS - 01(2011) Стандартные технические условия на плиты из нормализованной высокопрочной низколегированной конструкционной стали

A635/A635M - 09b Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for See all versions

A635/A635M-RUS - 09b Стандартные технические условия на сталь, тонколистовую и полосовую, в рулонах большой толщины, горячекатаную, легированную, углеродистую, конструкционную, высокопрочную низколегированную и высокопрочную низколегированную с улучшенной формуемостью, общие требования

A636 - 08 Standard Specification for Nickel Oxide Sinter See all versions

A638/A638M - 10 Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service See all versions

A640 - 97(2009)e1 Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable See all versions

A641/A641M - 09a Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire See all versions

A644 - 09a Standard Terminology Relating to Iron Castings See all versions

A645/A645M - 10 Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated See all versions

A646/A646M - 06(2011) Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings See all versions

A648 - 12 Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe See all versions

A649/A649M - 10 Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery See all versions

A650/A650M - 03(2008) Standard Specification for Tin Mill Products, Black Plate, Double Reduced See all versions

A653/A653M - 11 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process See all versions

A656/A656M - 12 Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability See all versions

A657/A657M - 03(2008)e1 Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced See all versions

A659/A659M - 12 Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled See all versions

A660/A660M - 11 Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service See all versions

A662/A662M - 12 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service See all versions

A663/A663M - 12 Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties See all versions

A664 - 11 Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications See all versions

A666 - 10 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar See all versions

A667/A667M - 87(2012) Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders See all versions

A668/A668M - 04(2009) Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use See all versions

A671/A671M - 10 Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures See all versions

A671/A671M-RUS - 10 Стандартные технические условия на стальную трубу, полученную электросваркой оплавлением, для температуры окружающей среды и пониженных температур

A672/A672M - 09 Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures See all versions

A673/A673M - 07(2012) Standard Specification for Sampling Procedure for Impact Testing of Structural Steel See all versions

A674 - 10 Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids See all versions

A675/A675M - 03(2009) Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties See all versions

A675/A675M-RUS - 03(2009) Стандартная спецификация на горячедеформируемую углеродистую сортовую сталь специального качества. Механические свойства

A677 - 07 Standard Specification for Nonoriented Electrical Steel Fully Processed Types See all versions

A679/A679M - 06(2012) Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn See all versions

A681 - 08 Standard Specification for Tool Steels Alloy See all versions

A683 - 05(2010) Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types See all versions

A684/A684M - 12 Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled See all versions

A686 - 92(2010) Standard Specification for Tool Steel, Carbon See all versions

A688/A688M - 12 Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes See all versions

A689 - 97(2007)e1 Standard Specification for Carbon and Alloy Steel Bars for Springs See all versions

A690/A690M - 07(2012) Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments See all versions

A691/A691M - 09 Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures See all versions

A691/A691M-RUS - 09 Стандартные технические условия на трубу из углеродистой и легированной стали, полученную электросваркой оплавлением, для эксплуатации в условиях высокого давления при высоких температурах

A693 - 06 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip See all versions

A694/A694M - 08 Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service See all versions

A696 - 90a(2012) Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components See all versions

A697/A697M - 03(2008) Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods See all versions

A698/A698M - 07 Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields See all versions

A700 - 05 Standard Practices for Packaging, Marking, and Loading Methods for Steel Products for Shipment See all versions

A700-RUS - 05 Стандартные методы упаковки, маркировки и погрузки стальных изделий при их отправке потребителю

A701/A701M - 10 Standard Specification for Ferromanganese-Silicon See all versions

A702 - 89(2006) Standard Specification for Steel Fence Posts and Assemblies, Hot Wrought See all versions

A703/A703M - 12b Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts See all versions

A704/A704M - 06(2011) Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement See all versions

A705/A705M - 95(2009) Standard Specification for Age-Hardening Stainless Steel Forgings See all versions

A706/A706M - 09b Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement See all versions

A706/A706M-SP - 09b Especificación Normalizada para Barras de Acero de Baja Aleación Lisas y Corrugadas para Refuerzo de Concreto See all versions

A707/A707M - 10 Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service See all versions

A709/A709M - 11 Standard Specification for Structural Steel for Bridges See all versions

A710/A710M - 02(2007) Standard Specification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates See all versions

A710/A710M-RUS - 02(2007) Стандартные технические условия на плиты из дисперсноупрочненной низкоуглеродистой никель-медь-хром-молибден-ниобиевой легированной конструкционной стали

A711/A711M - 07(2012) Standard Specification for Steel Forging Stock See all versions

A712 - 07 Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys See all versions

A713 - 04(2010) Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components See all versions

A713-RUS - 04(2010) Стандартная спецификация на стальную проволоку, пружины из высокоуглеродистой стали, для термообрабатываемых деталей

A714 - 99(2009)e1 Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe See all versions

A716 - 08 Standard Specification for Ductile Iron Culvert Pipe See all versions

A717/A717M - 12 Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens See all versions

A719/A719M - 02(2007) Standard Test Method for Lamination Factor of Magnetic Materials See all versions

A720/A720M - 02(2011) Standard Test Method for Ductility of Nonoriented Electrical Steel See all versions

A721/A721M - 02(2011) Standard Test Method for Ductility of Oriented Electrical Steel See all versions

A722/A722M - 12 Standard Specification for Uncoated High-Strength Steel Bars for Prestressing Concrete See all versions

A723/A723M - 10 Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application See all versions

A724/A724M - 09 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Layered Pressure Vessels See all versions

A726 - 05(2010) Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types See all versions

A727/A727M - 11 Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness See all versions

A729/A729M - 09e1 Standard Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service See all versions

A732/A732M - 09 Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures See all versions

A733 - 03(2009)e1 Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples See all versions

A734/A734M - 12 Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered See all versions

A735/A735M - 12 Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service See all versions

A736/A736M - 03(2007) Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium and Nickel-Copper-Manganese-Molybdenum-Columbium Alloy Steel See all versions

A737/A737M - 09 Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel See all versions

A738/A738M - 12 Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service See all versions

A739 - 90a(2012) Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both See all versions

A740 - 98(2008) Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric) See all versions

A741 - 11e1 Standard Specification for Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail See all versions

A742/A742M - 03(2008) Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe See all versions

A743/A743M - 06(2010) Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application See all versions

A744/A744M - 10e1 Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service See all versions

A745/A745M - 12 Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings See all versions

A746 - 09 Standard Specification for Ductile Iron Gravity Sewer Pipe See all versions

A747/A747M - 12 Standard Specification for Steel Castings, Stainless, Precipitation Hardening See all versions

A748/A748M - 87(2012) Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use See all versions

A749/A749M - 08 Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for See all versions

A751 - 11 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products See all versions

A751-RUS - 11 Стандартные методы испытаний, практические руководства и терминология для проведения химического анализа стальной продукции

A753 - 08 Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080) See all versions

A754/A754M - 11 Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence See all versions

A755/A755M - 11 Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products See all versions

A756 - 09 Standard Specification for Stainless Anti-Friction Bearing Steel See all versions

A757/A757M - 10 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service See all versions

A758/A758M - 10 Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness See all versions

A759 - 10 Standard Specification for Carbon Steel Crane Rails See all versions

A760/A760M - 10 Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains See all versions

A761/A761M - 04(2009) Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches See all versions

A762/A762M - 08 Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains See all versions

A763 - 93(2009) Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels See all versions

A764 - 07(2012) Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs See all versions

A765/A765M - 07(2012) Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements See all versions

A767/A767M - 09 Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement See all versions

A767/A767M-SP - 09 Especificación Normalizada para Barras de Acero Cincadas (Galvanizadas) para Refuerzo de Concreto See all versions

A768/A768M - 05(2010) Standard Specification for Vacuum-Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotors and Shafts See all versions

A769/A769M - 05(2010) Standard Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes See all versions

A770/A770M - 03(2012) Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications See all versions

A772/A772M - 00(2011)e1 Standard Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current See all versions

A773/A773M - 01(2009) Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs See all versions

A774/A774M - 09 Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures See all versions

A775/A775M - 07b Standard Specification for Epoxy-Coated Steel Reinforcing Bars See all versions

A775/A775M-SP - 07b Especificación Normalizada para Barras de Acero de Refuerzo Recubiertas con Epoxi

A778 - 01(2009)e1 Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products See all versions

A779/A779M - 10 Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted, Stress-Relieved for Prestressed Concrete See all versions

A780/A780M - 09 Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings See all versions

A781/A781M - 12b Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use See all versions

A786/A786M - 05(2009) Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates See all versions

A787/A787M - 09 Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing See all versions

A788/A788M - 11 Standard Specification for Steel Forgings, General Requirements See all versions

A789/A789M - 10a Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service See all versions

A789/A789M-RUS - 10a Стандартные технические условия на бесшовные и сварные стальные трубы общего назначения из ферритной/аустенитной нержавеющей стали

A790/A790M - 11 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe See all versions

A792/A792M - 10 Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process See all versions

A793 - 96(2009) Standard Specification for Rolled Floor Plate, Stainless Steel See all versions

A794/A794M - 12 Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled See all versions

A795/A795M - 08(2012) Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use See all versions

A796/A796M - 10 Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications See all versions

A798/A798M - 07 Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications See all versions

A799/A799M - 10 Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content See all versions

A800/A800M - 10 Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof See all versions

A801 - 09 Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650) See all versions

A802/A802M - 95(2010)e1 Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination See all versions

A803/A803M - 12 Standard Specification for Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes See all versions

A804/A804M - 04(2009)e1 Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens See all versions

A805/A805M - 09 Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled See all versions

A807/A807M - 02(2008) Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications See all versions

A809 - 08 Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire See all versions

A810 - 01(2009)e1 Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh See all versions

A810-RUS - 01(2009)e1 Стандартная спецификация на оцинкованную обмоточную сетку для стальных труб

A811 - 03(2008) Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy (P/M) Techniques See all versions

A813/A813M - 09 Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe See all versions

A814/A814M - 08 Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe See all versions