E50 Environmental Assessment, Risk Management and Corrective Action


    About the Event

    A Workshop on Estimating LNAPL Transmissivity will be held Thursday, January 30, 2014. Sponsored by ASTM Committee E50.04 on Corrective Action, the workshop will be held at the Hyatt Regency Houston in Houston, Texas, in conjunction with the January standards development meetings of the committee.

    Objective
    The objective of this workshop is to provide a basic understanding of how LNAPL Transmissivity can be estimated and how to use estimated values in understanding practical limits for hydraulic recovery of petroleum. This information may then be used in making effective decisions with regards to LNAPL assessment, management, and remediation.

    Who should attend?
    The target audience for this workshop is environmental consultants, environmental project managers, regulatory project managers, and technical staff. Attendees should have a basic understanding of hydrogeologic processes and non-aqueous phase liquid (NAPL) fundamentals. It is recommended that all attendees become familiar with the E2856 Standard in order to maximize the use of their time at the workshop.


    Registration Information

    Online registration opens approximately 8 weeks before the workshop and closes January 22, 2014. The fees to attend this workshop are listed below.

    Students – A student's fee is waived, provided that he/she is a full-time student and is not employed full time. After registering online, the student must check in at the ASTM Registration Desk on site and present his/her student ID. The waived fee includes admission to the technical sessions only.

    All attendees, including presenters and ASTM members, are urged to register online for this event so that space requirements can be accommodated. If you do not register online by the closing date, then you must register upon arrival at the workshop. All attendees must check in at the ASTM registration desk upon arrival at workshop.

    Cancellation

    A refund of the workshop fee will be honored only if requested at least 7 business days prior to the workshop. To cancel your registration and request a refund, please contact Hannah Sparks at hsparks@astm.org or 610-832-9678.

    If you have questions concerning online registration, please contact Hannah Sparks in Symposia Operations at hsparks@astm.org, Tel: 610-832-9677, or ASTM Technical Support at support@astm.org or 1-800-262-1373 (domestic) or 610-832-9578 (international).

    OnlineOn Site
    ASTM Member Fee160.00185.00
    Non-Member Fee185.00210.00
    Student FeeWaivedWaived

    Continuing Education Units

    Workshop attendees interested in receiving 0.7 Continuing Education Units (CEUs) should complete a CEU application form at the adjournment of the workshop, and then submit it to the ASTM staff member on site. A certificate will be sent to the attendee approximately 4 to 6 weeks after the workshop.


    Technical Chair Contact Information

    Additional information about the workshop is available from Workshop Chairman Tripp Fischer, P.G. Brownfield Science Technology, Inc., Cochranville, PA, tfischer@bstiweb.com, tel: 610-593- 5500.


    Hotel Information

    All meetings will be held at the Hyatt Regency Houston, 1200 Louisiana St, Houston, TX 77002. Reservations may be made by via our online reservation system at Reservation at Hyatt Regency Houston.

    Select your dates and proceed as instructed. Should you need to speak with a hotel representative please call 888-421-1442 (you must mention ASTM in order to receive the group rate).

    Group rate will be honored until the ASTM block is full but no later than December 27, 2013. ASTM rates are $129 single/double plus 17% tax. The Hyatt Regency Houston has a limited number of rooms at the government per diem rate of $118 plus 17% tax. You must present your ID at the front desk upon check-in. You may be charged a higher rate if reservations are received after the cut-off date, or when the block is full.

    IMPORTANT! ASTM rates are non-commissionable. If you book your reservation through a travel agent they must ask for a non-commissioned ASTM Group Rate. ASTM cannot adjust your higher rate if commissions were paid to a travel agency.

    ADVANCE DEPOSIT: Hyatt Regency Houston requires a credit card to guarantee your reservation.

    CONFIRMATION NOTICES: A confirmation number is provided to you electronically once your reservation has been submitted.

    CANCELLATION/CHANGE POLICY: At the Hyatt Regency Houston, notice of cancellation must be received within 72 hours prior to arrival.

    Check the ASTM website for updates on overflow hotel room availability.

    INTERNET: The Hyatt Regency Houston provides complimentary standard wireless internet connection in all paid guest rooms. The price for access through the hotel is $9.99 for 24 hours.


    Transportation and Directions

    The hotel is located approximately 20miles/20 minutes from the William P. Hobby Airport and 45 miles/45 minutes from the George W. Bush Airport. The hotel's phone number is 713-654-1234. The website for the hotel is Hyatt Regency Houston Information. NOTE: DO NOT make your hotel reservation from this site, for you will be quoted a rate higher than the group rate. Please refer to the reservation link on page one.

    For information on the city of Houston, visit the Houston Convention and Visitors Bureau Website at: Houston Convention and Visitors Bureau

    AIRPORT SHUTTLE SERVICE: Super Shuttle provides regularly scheduled shuttle service from William P. Hobby Airport for $22 and the George W. Bush Airport for $26. Taxis cost approximately $30 from the Hobby Airport and $50 from the Bush Airport.

    PARKING: Valet parking is $30 per night with in and out privileges.


    Standards Development Meetings

    Meeting schedules of Committee E50 are posted on the ASTM web site at www.astm.org/COMMIT/COMMITTEE/E50.htm or contact the ASTM staff manager, Kate McClung at kmcclung@astm.org or tel: 610-832-9717.


    Future Meeting Dates

    Committee E50 invites you to attend their future standards development meetings. There is no fee to attend these meetings, and membership in ASTM International is not required. For more information, visit the web page listed immediately above, and click on "Future Meetings".


    Back to Top