F17 (14-03)

    Item No.Sub No.Item
    1.10Revision Of F1807-2013A Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing WK45423
    2.10Revision Of F1960-2012 Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing WK44749
    3.10Revision Of F2159-2011 Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing WK45424
    4.10Revision Of F2434-2009 Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing WK45425
    5.20Revision With Title Change to D2855-1996(2010) Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings WK28091
    6.20Revision Of F0477-2010 Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe WK46239
    7.26Revision Of D3035-2014 Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter WK40855
    8.26Revision Of D3035-2014 Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter WK40855
    9.26Revision Of F2623-2008 Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing WK46244
    10.26Revision Of F2649-2008A Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor Tanks WK45821
    11.26Revision Of F3034-2013 Specification for Billets made by Winding Molten Extruded Stress-Rated High Density Polyethylene (HDPE) WK44141
    12.40Practice For Joint Testing of Installed Thermoplastic Pipe for Gravity Flow (Non-Pressure) Sewer Lines WK35687
    13.40Revision Of F2263-2007(2011) Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water WK43802
    14.40Reapproval of F2018-2000(2010) Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens WK45921
    15.60Revision Of D2513-2014E1 Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings WK41761
    16.60Reapproval of F2818-2010 Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing WK46314
    17.61Reapproval of F1668-2008 Guide for Construction Procedures for Buried Plastic Pipe WK46184
    18.62Revision Of D2321-2011 Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications WK43750
    19.62Revision Of D3034-2014 Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings WK44870
    20.62Reapproval of D2680-2001(2009) Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping WK45650
    21.62Reapproval of F0794-2003(2009) Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter WK45658
    22.65Reapproval of F0481-1997(2008) Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields WK45643
    23.67PRACTICE FOR THE INSTALLATION OF A SINGLE SIZED CURED IN PLACE LINER FOR RESURFACING MANHOLE WALLS OF VARIOUS SHAPES AND SIZES WK36573
    24.67Practice For Installation of an Outside Sewer Service Cleanout through a Minimally Invasive Small Bore Vacuum Excavation WK36574
    25.Administrative Item Revision to the F17 Manual