|
F01 on Electronics
NEW STANDARD
Volume 10.04, 2005
F 2358-04, Guide for Measuring Characteristics of Sapphire Substrates
F 2405-04, Test Method for Trace Metallic Impurities in High Purity Copper by High-Mass-Resolution Glow Discharge Mass Spectrometer
REVISION OF STANDARD
Volume 10.04, 2005
F 1662-04, Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch
REAPPROVAL OF STANDARD
Volume 10.04, 2005
F 1895-98 (2004)
F 1896-98 (2004)
F02 on Flexible Barrier Materials
REVISION OF STANDARD
Volume 15.09, 2004
F 2338-04, Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method
REAPPROVAL OF STANDARD
Volume 15.09, 2004
F 1886-98 (2004)
F 1929-98 (2004)
WITHDRAWAL OF STANDARD
Volume 15.09, 2004
F 151-86(1997), Test Method for Residual Solvents in Flexible Barrier Materials
F 1769-97, Test Method for the Measurement of Diffusivity, Solubility, and Permeability of Organic Vapor Barriers Using a Flame Ionization Detector
F 1770-97, Test Method for Evaluation of Solubility, Diffusivity, and Permeability of Flexible Barrier Materials to Water Vapor
F04 on Medical and Surgical Materials and Devices
NEW STANDARD
Volume 13.01, 2004
F 2386-04, Guide for Preservation of Tissue Engineered Medical Products Temps
F 2392-04, Test Method for Burst Strength of Surgical Sealants
REVISION OF STANDARD
Volume 13.01, 2004
F 748-04, Practice for Selecting Generic Biological Test Methods for Materials and Devices
F 763-04, Practice for Short-term Screening of Implant Materials
F 981-04, Practice for Assessment of Compatibility of Biomaterials for Surgical Implants with Respect to Effect of Materials on Muscle and Bone
F 1635-04, Test Method for in Vitro Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants
F05 on Business Imaging Products
NEW STANDARD
Volume 15.09, 2004
F 2406-04, Practice for Determining Yield of Solid Ink Sticks
F06 on Resilient Floor Coverings
REVISION OF STANDARD
Volume 15.04, 2004
F 1869-04, Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride
F08 on Sports Equipment and Facilities
REVISION OF STANDARD
Volume 15.07, 2004
F 1163-04, Specification for Protective Headgear Used in Horse Sports and Horseback Riding
F 1881-04, Test Method for Measuring Baseball Bat Performance Factor
F 1882-04, Specification for Residential Basketball Systems
F 1890-04, Test Method for Measuring Softball Bat Performance Factor
F 2075-04, Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment
F 2219-04, Test Methods for Measuring High Speed Baseball Bat Performance Factor
EDITORIAL CHANGE
Volume 15.07, 2004
F 2398-04e1, Test Method for Measuring Moment of Inertia and Center of Percussion of a Baseball or Softball Bat
F13 on Pedestrian/Walkway Safety and Footwear
REAPPROVAL OF STANDARD
Volume 15.07, 2004
F 1694-96 (2004)
F14 on Fences
REVISION OF STANDARD
Volume 01.06, 2005
F 668-04, Specification for Polyvinyl Chloride PVC and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric
F 1083-04, Specification for Pipe, Steel, Hot-Dipped Zinc-Coated Galvanized Welded, for Fence Structures
F15 on Consumer Products
NEW STANDARD
Volume 15.07, 2004
F 2369-04, Safety Specification for Non-Integral Firearm Locking Devices
F 2372-04, Consumer Safety Performance Specification for Shopping Carts
EDITORIAL CHANGE
Volume 15.07, 2004
F 2167-01e1, Consumer Safety Specification for Infant Bouncer Seats
REAPPROVAL OF STANDARD
Volume 15.07, 2004
F 1566-99 (2004)
F 1988-99 (2004)
REAPPROVAL WITH EDITORIAL CHANGE
Volume 15.07, 2004
F 1838-98 (2004)e1, Performance Requirements for Child’s Plastic Chairs for Outdoor Use
F 1858-98 (2004)e1, Performance Requirements for Multipositional Plastic Chairs with Adjustable Backs or Reclining Mechanisms for Outdoor Use
F16 on Fasteners
REVISION OF STANDARD
Volume 01.08, 2005
A 489-04, Specification for Carbon Steel Lifting Eyes
F 1136-04, Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners
F 1136M-04, Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners [Metric]
F17 on Plastic Piping Systems
NEW STANDARD
Volume 08.04, 2005
F 2389-04, Specification for Pressure-Rated Polypropylene PP Piping Systems
REVISION OF STANDARD
Volume 08.04, 2004
D 2665-04a, Specification for Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
F 876-04, Specification for Crosslinked Polyethylene (PEX)Tubing
F 2098-04, Specification for Stainless Steel Clamps for Securing Sdr9 Cross-Linked Polyethylene (PEX)Tubing to Metal Insert Fittings
Volume 08.04, 2005
D 1785-04, Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
D 2241-04a, Specification for Poly (Vinyl Chloride) (PVC) Pressure-rated Pipe Sdr Series
D 2513-04a, Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
D 2837-04, Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
D 3034-04, Specification for Type Psm Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings
F 493-04, Specification for Solvent Cements for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe and Fittings
F23 on Protective Clothing
REVISION OF STANDARD
Volume 11.03, 2004
F 2300-04a, Test Method for Measuring the Performance of Personal Cooling Systems Using Physiological Testing
REAPPROVAL OF STANDARD
Volume 11.03, 2004
F 903-03 (2004)
F 1359-99a(2004)
F24 on Amusement Rides and Devices
REVISION OF STANDARD
Volume 15.07, 2004
F 1193-04a, Practice for Amusement Ride and Device Manufacturer Quality Assurance Program and Manufacturing Requirements
F25 on Ships and Marine Technology
REAPPROVAL OF STANDARD
Volume 01.07, 2005
F 1321-92 (2004)
F30 on Emergency Medical Services
EDITORIAL CHANGE
Volume 13.02, 2004
F 1224-89 (2004)e1, Guide for Providing System Evaluation for Emergency Medical Services
F36 on Technology and Underground Utilities
NEW STANDARD
Volume 04.12, 2004
F 2350-04, Practice for Selection of Natural Gas Pipelines Suitable for Installation of Optical Fiber Systems
F38 on Unmanned Air Vehicle Systems
NEW STANDARD
Volume 15.07, 2004
F 2411-04, Specification for Design and Performance of an Airborne Sense-and-Avoid System
|
