Bookmark and Share

Standardization News Search
September 2004 Approved Standards Actions
A Committees B Committees C Committees D Committees
E Committees F Committees G Committees

E01 on Analytical Chemistry for Metals, Ores and Related Materials

REVISION OF STANDARD

Volume 03.05, 2004
E 135-04, Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
E 315-04, Test Methods for Chemical Analysis of Molybdenum
E 342-04, Test Method for Determination of Chromium Oxide in Chrome Ores by Permanganate Titrimetry
E 396-04, Test Methods for Chemical Analysis of Cadmium
E 439-04, Test Methods for Chemical Analysis of Beryllium
E 536-04, Test Methods for Chemical Analysis of Zinc and Zinc Alloys
E 815-04, Test Method for Determination of Calcium Fluoride in Fluorspar by Complexometric Titration
E 841-04, Test Method for Determination of Copper in Iron Ores and Related Materials by Atomic Absorption Spectrometry
E 1409-04, Test Method for Determination of Oxygen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique

Volume 03.06, 2004
E 1937-04, Test Method for Determination of Nitrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique
E 1941-04, Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys

REAPPROVAL OF STANDARD

Volume 03.05, 2004
E 60-98 (2004)
E 1282-98 (2004)
E 1306-94 (2004)

Volume 03.06, 2004
E 1916-97 (2004)
E 2050-99 (2004)

E04 on Metallography

REAPPROVAL OF STANDARD

Volume 03.01, 2004
E 1558-99 (2004)

E06 on Performance of Buildings

NEW STANDARD

Volume 04.11, 2004
E 2356-04, Practice for Comprehensive Building Asbestos Surveys

REAPPROVAL OF STANDARD

Volume 04.11, 2004
E 936-98 (2004)

E07 on Nondestructive Testing

NEW STANDARD

Volume 03.03, 2004
E 2374-04, Guide for Acoustic Emission System Performance Verification

REVISION OF STANDARD

Volume 03.03, 2004
E 750-04, Practice for Characterizing Acoustic Emission Instrumentation
E 1418-04, Test Method for Visible Penetrant Examination Using the Water-washable Process

REAPPROVAL OF STANDARD WITH EDITORIAL CHANGE

Volume 03.03, 2004
E 272-99 (2004)e1
E 310-99 (2004)e1
E 566-99 (2004)e1
E 1312-99 (2004)e1
E 1606-99 (2004)e1

REAPPROVAL OF STANDARD

Volume 03.03, 2004
E 432-91 (2004)
E 545-99 (2004)
E 908-98 (2004)
E 1311-89 (2004)
E 2003-98 (2004)
E 2023-99 (2004)

E08 on Fatigue and Fracture

NEW STANDARD

Volume 03.01, 2004
E 2368-04, Practice for Strain Controlled Thermomechanical Fatigue Testing

REVISION OF STANDARD

Volume 03.01, 2004
E 1922-04, Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials

REAPPROVAL OF STANDARD

Volume 03.01, 2004
E 467-98a(2004)
E 468-90 (2004)
E 739-91 (2004)
E 1942-98 (2004)

E12 on Color and Appearance

REVISION OF STANDARD

Volume 06.01, 2004
E 1696-04, Test Method for Field Measurement of Raised Retroreflective Pavement Markers Using a Portable Retroreflectometer

Volume 06.01, 2005
E 284-04, Terminology of Appearance
E 1331-04, Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry

E17 on Vehicle - Pavement Systems

REVISION OF STANDARD

Volume 04.03, 2005
E 1957-04 (Includes Change to Title), Practice for Installing Using Pneumatic Tubes with Roadway Traffic Counters and Classifiers

E28 on Mechanical Testing

REVISION OF STANDARD

Volume 03.01, 2004
E 111-04, Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus

E30 on Forensic Sciences

NEW STANDARD

Volume 14.02, 2004
E 2332-04, Practice for Investigation and Analysis of Physical Component Failures

E33 on Environmental Acoustics

EDITORIAL CHANGE

Volume 04.06, 2004
E 1007-04e1, Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-ceiling Assemblies and Associated Support Structures

E34 on Occupational Health and Safety

REAPPROVAL OF STANDARD

Volume 11.03, 2004
E 1542-93 (2004)

E35 on Pesticides and Alternative Control Agents

EDITORIAL CHANGE

Volume 11.05, 2004
E 2316-03e1, Test Method for Determination of Particles Resulting from the Attrition of Granular Pesticides

E37 on Thermal Measurements

REVISION OF STANDARD

Volume 14.02, 2004
E 289-04, Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry
E 1225-04, Test Method for Thermal Conductivity of Solids by Means of the Guarded-Comparative-Longitudinal Heat Flow Technique
E 1269-04, Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
E 1530-04, Test Method for Evaluating the Resistance to Thermal Transmission of Materials by the Guarded Heat Flow Meter Technique
E 1582-04, Practice for Calibration of Temperature Scale for Thermogravimetry
E 1640-04, Test Method for Assignment of the Glass Transition Temperature by Dynamic Mechanical Analysis
E 1868-04, Test Method for Loss-On-Drying by Thermogravimetry

E41 on Laboratory Apparatus

REVISION OF STANDARD

Volume 14.04, 2004
E 1094-04, Specification for Pharmaceutical Glass Graduates

E44 on Solar, Geothermal and Other Alternative Energy Sources

REVISION OF STANDARD

Volume 12.02, 2004
E 927-04, Specification for Solar Simulation for Photovoltaic Testing

EDITORIAL CHANGE

Volume 12.02, 2004
E 1675-04e1, Practice for Sampling Two-Phase Geothermal Fluid for Purposes of Chemical Analysis

WITHDRAWAL OF STANDARD

Volume 12.02, 2004
E 1524-98, Test Method for Saltwater Immersion and Corrosion Testing of Photovoltaic Modules for Marine Environments

E50 on Environmental Assessment, Risk Management and Corrective Action

NEW STANDARD

Volume 11.04, 2004
E 2278-04, Guide for Use of Coal Combustion Products Ccps for Surface Mine Reclamation: Revegetation and Mitigation of Acid Mine Drainage

REAPPROVAL OF STANDARD

Volume 11.04, 2004
E 1912-98 (2004)
E 1943-98 (2004)

E52 on Forensic Psychophysiology

NEW STANDARD

Volume 14.02, 2005
E 2324-04, Guide for PDD Paired Testing

REVISION OF STANDARD

Volume 14.02, 2005
E 2035-04, Terminology Relating to Forensic Psychophysiology