Bookmark and Share

Standardization News Search
September 2004 Approved Standards Actions
A Committees B Committees C Committees D Committees
E Committees F Committees G Committees

D01 on Paint and Related Coatings, Materials, and Applications

NEW STANDARD

Volume 06.02, 2005
D 7054-04, Specification for Cautionary Labeling of Extension Poles for Use with Paint Applicators Distributed in North America

REVISION OF STANDARD

Volume 06.01, 2005
D 6132-04 (Includes change to title), Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Gage

Volume 06.02, 2005
D 1641-04, Practice for Conducting Outdoor Exposure Tests of Varnishes
D 3258-04 (Includes change to title), Test Method for Porosity of White or Near White Paint Films by Staining
D 3793-04, Test Method for Low-Temperature Coalescence of Latex Paint Films
D 5068-04, Practice for Preparation of Paint Brushes for Evaluation
D 6488-04, Terminology Relating to Print Problems
D 6583-04 (Includes change to Title), Test Method for Porosity of Paint Film by Mineral Oil Absorption
D 6901-04, Specification for Artists’ Colored Pencils

Volume 06.03, 2005
D 4139-04, Guide for Determining Volatile and Nonvolatile Content of Pigments
D 6687-04, Guide for Testing Printing Ink Vehicles and Components Thereof

Volume 06.04, 2005
D 1133-04, Test Method for Kauri-Butanol Value of Hydrocarbon Solvents
D 2379-04, Test Method for Acidity of Formaldehyde Solutions
D 2380-04, Test Method for Methanol Content of Formaldehyde Solutions
D 2916-04, Specification for Isophorone
D 3548-04, Specification for Ethyl Acrylate
D 3620-04, Specification for Glacial Acetic Acid
D 4416-04, Specification for Acrylic Acid
D 5399-04, Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography

REAPPROVAL OF STANDARD

Volume 06.01, 2005
D 1210-96 (2004)
D 1360-98 (2004)
D 2197-98 (2004)
D 2794-93 (2004)
D 3539-87 (2004)
D 3806-98 (2004)
D 4610-98 (2004)
D 4708-99 (2004)

Volume 06.02, 2005
D 711-89 (2004)
D 869-85 (2004)
D 1309-93 (2004)
D 2205-85 (2004)
D 2743-68 (2004)
D 2792-69 (2004)
D 3623-78a(2004)
D 4796-88 (2004)
D 4797-88 (2004)
D 4941-89 (2004)
D 4958-97 (2004)
D 5063-90 (2004)

Volume 06.03, 2005
D 301-95 (2004)
D 817-96 (2004)
D 871-96 (2004)
D 889-99 (2004)
D 1135-86 (2004)
D 1982-85 (2004)
D 3256-86 (2004)
D 3971-89 (2004)
E 28-99 (2004)

Volume 06.04, 2005
D 1722-98 (2004)

WITHDRAWAL OF STANDARD

Volume 06.03, 2005
D 603-66(1996)e1, Specification for Aluminum Silicate Pigments (Hydrous)
D 3619-77(1996)e1, Specification for Aluminum Silicate Pigments (Anhydrous)
D 5532-94(1999), Specification for Micaceous Iron Oxide Pigments for Paint

D02 on Petroleum Products and Lubricants

NEW STANDARD

Volume 05.04, 2005
D 7038-04, Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants
D 7039-04, Test Method for Sulfur in Gasoline and Diesel Fuel by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
D 7044-04, Specification for Biodegradable Fire Resistant Hydraulic Fluids

REVISION OF STANDARD

Volume 05.01, 2005
D 86-04b, Test Method for Distillation of Petroleum Products at Atmospheric Pressure
D 445-04, Test Method for Kinematic Viscosity of Transparent and Opaque Liquids and the Calculation of Dynamic Viscosity
D 611-04, Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents
D 975-04a, Specification for Diesel Fuel Oils

Volume 05.02, 2005
D 4055-04, Test Method for Pentane Insolubles by Membrane Filtration
D 4485-04, Specification for Performance of Engine Oils
D 4806-04, Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
D 5293-04, Test Method for Apparent Viscosity of Engine Oils Between -5 and -35°C Using the Cold-Cranking Simulator

Volume 05.03, 2005
D 5372-04, Guide for Evaluation of Hydrocarbon Heat Transfer Fluids
D 5481-04, Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
D 5579-04, Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test
D 5704-04, Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles
D 5769-04, Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry
D 6201-04, Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation
D 6304-04a, Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
D 6379-04, Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection

Volume 05.04, 2005
D 6593-04, Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
D 6594-04, Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135°C
D 6792-04, Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories
D 6837-04, Test Method for Measurement of the Effects of Automotive Engine Oils on the Fuel Economy of Passenger Cars and Light-Duty Trucks in the Sequence VIB Spark Ignition Engine
D 6838-04, Test Method for Cummins M11 High Soot Test
D 6973-04, Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
D 6974-04, Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures

REAPPROVAL OF STANDARD

Volume 05.01, 2005
D 612-88 (2004)
D 1833-87 (2004)
D 2162-99 (2004)
D 2534-88 (2004)
D 3230-99 (2004)

Volume 05.02, 2005
D 3236-88 (2004)

Volume 05.03, 2005
D 6081-98 (2004)
D 6259-98 (2004)
D 6470-99 (2004)

REAPPROVAL OF STANDARD WITH EDITORIAL CHANGE

Volume 05.02, 2005
D 4950-95 (2004)e1

Volume 05.03, 2005
D 5623-94 (2004)e1
D 6445-99 (2004)e1

D04 on Road and Paving Materials

REVISION OF STANDARD

Volume 04.03, 2004
D 1752-04a, Specification for Preformed Sponge Rubber Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction
D 3141-04, Specification for Asphalt for Undersealing Portland-cement Concrete Pavements
D 4311-04, Practice for Determining Asphalt Volume Correction to a Base Temperature
D 6084-04, Test Method for Elastic Recovery of Bituminous Materials by Ductilometer
D 6154-04, Specification for Chemically Modified Asphalt Cement for Use in Pavement Construction
D 6521-04, Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)

REAPPROVAL OF STANDARD

Volume 04.03, 2004
D 4552-92 (2004)

WITHDRAWAL OF STANDARD

Volume 04.03, 2005
D 5212-03, Specification for High Load Rotational Confined Elastomeric Bearings for Bridges and Structures

D05 on Coal and Coke

REVISION OF STANDARD

Volume 05.06, 2004
D 6883-04, Practice for Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, or Stockpiles

REAPPROVAL OF STANDARD

Volume 05.06, 2004
D 388-99 (2004)

D07 on Wood

REVISION OF STANDARD

Volume 04.10, 2005
D 5457-04, Specification for Computing the Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design

D08 on Roofing and Waterproofing

REVISION OF STANDARD

Volume 04.04, 2005
D 225-04, Specification for Asphalt Shingles Organic Felt Surfaced with Mineral Granules
D 3462-04, Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules
D 5635-04a, Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens
D 5869-04, Practice for Dark Oven Heat Exposure of Bituminous Materials

REAPPROVAL OF STANDARD

Volume 04.04, 2005
D 4-86 (2004)
D 5405-98 (2004)

D09 on Electrical and Electronic Insulating Materials

REVISION OF STANDARD

Volume 10.02, 2005
D 5213-04, Specification for Polymeric Resin Film for Electrical Insulation and Dielectric Applications

D11 on Rubber

NEW STANDARD

Volume 09.01, 2005
D 7050-04, Practice for Rubber from Natural Sources–Sampling and Sorting Bales Based on Predicted Processing Properties

REVISION OF STANDARD

Volume 09.01, 2005
D 454-04, Test Method for Rubber–Deterioration by Heat and Air Pressure
D 572-04, Test Method for Rubber–Deterioration by Heat and Oxygen
D 926-04, Test Method for Rubber Property–Plasticity and Recovery Parallel Plate Method
D 2702-04, Practice for Rubber Chemicals–Determination of Infrared Absorption Characteristics

D13 on Textiles

NEW STANDARD

Volume 07.02, 2004
D 7022-04, Terminology Relating to Apparel
D 7023-04, Terminology Relating to Home Furnishings

REVISION OF STANDARD

Volume 07.01, 2004
D 1445-00, Test Method for Breaking Strength and Elongation of Cotton Fibers (Flat Bundle Method)
D 1574-00, Test Method for Extractable Matter in Wool
Volume 07.02, 2004
D 4038-00, Performance Specification for Women's and Girls' Woven Dress and Blouse Fabrics
D 5866-00, Test Method for Neps in Cotton Fibers (AFIS-N Instrument)
D 5867-00, Test Methods for Measurement of Physical Properties of Cotton Fibers by High Volume Instruments

D15 on Engine Coolants

REVISION OF STANDARD

Volume 15.05, 2004
D 2809-04, Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps with Engine Coolants
D 4725-04, Terminology for Engine Coolants
D 5752-04, Specification for Supplemental Coolant Additives (SCAs) for Use in Precharging Coolants for Heavy-Duty Engines

D16 on Aromatic Hydrocarbons and Related Chemicals

NEW STANDARD

Volume 06.04, 2005
D 7057-04, Test Method for Analysis of Isopropylbenzene Cumene by Gas Chromatography (External Standard)

REVISION OF STANDARD

Volume 06.04, 2005
D 847-04, Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons
D 6367-04, Specification for AMS (a-methylstyrene)

REAPPROVAL OF STANDARD

Volume 06.04, 2005
D 1686-96 (2004)
D 4471-00 (2004)
D 4790-99 (2004)
D 5136-00 (2004)
D 5310-00 (2004)

WITHDRAWAL OF STANDARD

Volume 06.04, 2005
D 1493-97, Test Method for Solidification Point of Industrial Organic Chemicals

D18 on Soil and Rock

NEW STANDARD

Volume 04.09, 2004
D 7046-04, Guide for Use of the Metal Detection Method for Subsurface Investigation

Volume 04.09, 2005
D 7045-04, Guide for Optimization of Ground Water Monitoring Constituents for Detection Monitoring Programs for RCRA Waste Disposal Facilities
D 7048-04, Guide for Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs

REVISION OF STANDARD

Volume 04.09, 2004
D 6684-04, Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Revetment Systems

REAPPROVAL OF STANDARD

Volume 04.09, 2004
D 6168-97 (2004)
D 6170-97 (2004)
D 6171-97 (2004)
D 6236-98 (2004)
D 6391-99 (2004)

D19 on Water

NEW STANDARD

Volume 11.02, 2004
D 7066-04, Test Method for Dimer/Trimer of Chlorotrifluoroethylene S-316 Recoverable Oil and Grease and Nonpolar Material by Infrared Determination

REVISION OF STANDARD

Volume 11.01, 2004
D 5542-04, Test Methods for Trace Anions in High Purity Water by Ion Chromatography

Volume 11.02, 2005
D 6888-04, Test Method for Available Cyanide with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection

D20 on Plastics

NEW STANDARD

Volume 08.03, 2005
D 6954-04, Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation
D 7026-04, Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials Via Carbon Isotope Analysis
D 7029-04, Test Method for Determination of Reactivity of Unsaturated Polyesters and Vinyl Esters at 180.0&Mac176;F (82.2&Mac176;C)

REVISION OF STANDARD

Volume 08.01, 2005
D 256-04, Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
D 789-04, Test Method for Determination of Relative Viscosity of Polyamide (PA)
D 2115-04, Practice for Oven Heat Stability of Poly Vinyl Chloride Compositions

Volume 08.02, 2005
D 3012-04, Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven
D 4101-04, Specification for Polypropylene Injection and Extrusion Materials

Volume 08.03, 2005
D 4441-04, Specification for Aqueous Dispersions of Polytetrafluoroethylene
D 4889-04, Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates
D 4976-04, Specification for Polyethylene Plastics Molding and Extrusion Materials

REAPPROVAL OF STANDARD
Volume 08.01, 2005
D 2222-94 (2004)

Volume 08.02, 2005
D 2396-94 (2004)
D 2843-99 (2004)
D 3367-98 (2004)

Volume 08.03, 2005
D 4349-96 (2004)
D 4663-98 (2004)
D 6456-99 (2004)

WITHDRAWAL OF STANDARD

Volume 08.03, 2005
D 5318-97, Test Method for Hydrolyzable Chloride in Peroxy Esters and Peroxy Dicarbonates
D 5676-99, Specification for Recycled Polystyrene Molding and Extrusion Materials

D22 on Sampling and Analysis of Atmospheres

NEW STANDARD

Volume 11.03, 2004
D 7034-04, Guide for Deriving Acceptable Levels of Airborne Chemical Contaminants in Aircraft Cabins Based on Health and Comfort Considerations
D 7049-04, Test Method for Metal Removal Fluid Aerosol in Workplace Atmospheres

REAPPROVAL OF STANDARD

Volume 11.03, 2004
D 3631-99 (2004)

REAPPROVAL OF STANDARD WITH EDITORIAL CHANGE

Volume 11.03, 2004
D 6333-98 (2004)e1
D 6345-98 (2004)e1
D 6494-99 (2004)e1

D24 on Carbon Black

REVISION OF STANDARD

Volume 09.01, 2005
D 3765-04, Test Method for Carbon Black–CTAB (Cetyltrimethylammonium Bromide) Surface Area
D 4821-04, Guide for Carbon Black–Validation of Test Method Precision and Bias

REAPPROVAL OF STANDARD

Volume 09.01, 2005
D 1513-99a(2004)
D 4583-95 (2004)

D28 on Activated Carbon

REAPPROVAL OF STANDARD

Volume 15.01, 2004
D 2862-97 (2004)
D 2866-94 (2004)
D 3803-91 (2004)

D34 on Waste Management

EDITORIAL CHANGE

Volume 11.04, 2004
D 4843-86(2004)e1 Test Method for Wetting and Drying Test of Solid Wastes