Bookmark and Share

Standardization News Search
September 2003 Approved Standards Actions
A Committees B Committees C Committees D Committees
E Committees F Committees G Committees
A01 on Steel, Stainless Steel and Related Alloys

NEW STANDARD
Volume 01.04, 2000
A 1026-03, Specification for Alloy Steel Structural Shapes for Use in Building Framing

REVISION OF STANDARD
Volume 01.03, 2004
A 313/A 313M-03, Specification for Stainless Steel Spring Wire
A 484/A 484M-03a, Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
A 693-03, Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
Volume 01.04, 2000
A 283/A 283M-03, Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
A 572/A 572M-03, Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
A 709/A 709M-03, Specification for Carbon and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and Quenched-and-Tempered Alloy Structural Steel Plates for Bridges A 852/A 852M-03, Specification for Quenched and Tempered Low-Alloy Structural Steel Plate with 70 KSI 485 Mpa Minimum Yield Strength to 4 in. 100 mm Thick
A 871/A 871M-03, Specification for High-Strength Low-Alloy Structural Steel Plate with Atmospheric Corrosion Resistance
Volume 01.04, 2002
A 36/A 36M-02, Specification for Carbon Structural Steel
A 82-02, Specification for Steel Wire, Plain, for Concrete Reinforcement
A 299/A 299M-02, Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon
A 416/A 416M-02, Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete
A 496-02, Specification for Steel Wire, Deformed, for Concrete Reinforcement
A 497/A 497M-02, Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete
A 529/A 529M-02, Specification for High-Strength Carbon-Manganese Steel of Structural Quality
A 572/A 572M-02, Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
A 615/A 615M-02, Specification for Deformed and Plain Billet-Steel Bars for Concrete Reinforcement
A 673/A 673M-02, Specification for Sampling Procedure for Impact Testing of Structural Steel
A 827/A 827M-02, Specification for Plates, Carbon Steel, for Forging and Similar Applications
A 830/A 830M-02, Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
A 881/A 881M-02, Specification for Steel Wire, Deformed, Stress-Relieved or Low-Relaxation for Prestressed Concrete Railroad Ties
A 884/A 884M-02, Specification for Epoxy-Coated Steel Wire and Welded Wire Fabric for Reinforcement
A 886/A 886M-02, Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete
A 911/A 911M-02, Specification for Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Railroad Ties
A 951-02, Specification for Masonry Joint Reinforcement
A 996/A 996M-02, Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
Volume 01.04, 2004
A 421/A 421M-02, Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete
A 588/A 588M-03a, Specification for High-Strength Low-Alloy Structural Steel with 50 KSI 345 MPA Minimum Yield Point to 4 in. 100mm Thick
A 841/A 841M-03, Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process TMCP
A 934/A 934M-03, Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars
Volume 01.05, 2000
A 266/A 266M-03, Specification for Carbon Steel Forgings for Pressure Vessel Components
A 388/A 388M-03, Practice for Ultrasonic Examination of Heavy Steel Forgings
A 470-03, Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts
A 668/A 668M-03, Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
Volume 01.05, 2002
A 290-02, Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears
A 372/A 372M-02, Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels
A 427-02, Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction
A 471-02, Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels
A 859/A 859M-02, Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components
A 982-02, Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils
Volume 01.05, 2003
A 291-03, Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears
Volume 01.05, 2004
A 1021/A 1021M-02, Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service

REAPPROVAL OF STANDARD
Volume 01.03, 2004
A 853-93 (2003)
A 938-97 (2003)
A 980-97 (2003)

WITHDRAWAL OF STANDARD
Volume 01.05, 2003
A 695-90b (1995)e1, Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, for Fluid Power Applications
Volume 01.05, 2004
A 21-94 (1999), Specification for Carbon Steel Axles, Non-Heat-Treated and Heat-Treated, for Railway Use

A05 on Metallic-Coated Iron and Steel Products

REVISION OF STANDARD
Volume 01.06, 2004
A 143-03, Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
A 153-03, Specification for Zinc Coating Hot-Dip on Iron and Steel Hardware
A 385-03, Practice for Providing High-Quality Zinc Coatings Hot-Dip
A 742/A 742M-03, Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
A 761/A 761M-03, Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches A 796/A 796M-03, Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
A 817-03, Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
A 902-03, Terminology Relating to Metallic Coated Steel Products
A 964-02, Specification for Corrugated Steel Box Culverts
A 979-03, Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field

REAPPROVAL OF STANDARD
Volume 01.06, 2004
A 459-97 (2003)
A 603-98 (2003)
A 740-98 (2003)
A 741-98 (2003)
A 854/A 854M-98 (2003)
A 974-97 (2003)
A 975-97 (2003)

Click here for ASTM Business Link