Bookmark and Share

Standardization News Search
October 2004 Approved Standards Actions
A Committees B Committees C Committees D Committees
E Committees F Committees G Committees
D01 on Paint and Related Coatings, Materials, and Applications

NEW STANDARD

Volume 06.02, 2005
D 7055-04, Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings
D 7072-04, Practice for Evaluating Accelerated Efflorescence of Latex Coatings

REVISION OF STANDARD

Volume 06.01, 2005
D 1544-04, Test Method for Color of Transparent Liquids (Gardner Color Scale)
D 3964-04, Practice for Selection of Coating Specimens for Appearance Measurements
D 6902-04, Test Method for Laboratory Measurement of Formaldehyde Evolved During the Curing of Melamine-Formaldehyde-Based Coatings

Volume 06.02, 2005
D 5181-04, Test Method for Abrasion Resistance of Printed Matter by the GA-CAT Comprehensive Abrasion Tester
D 6487-04 (Includes Change to Title), Practice for Preparing Prints of Paste Printing Inks by Rollouts on a Laboratory Flat-Bed Press

WITHDRAWAL OF STANDARD

Volume 06.03, 2005
D 1962-85 (1995), Test Method for Saponification Value of Drying Oils, Fatty Acids, and Polymerized Fatty Acids

REAPPROVAL OF STANDARD
Volume 06.03, 2005
D 6090-99 (2004)

D02 on Petroleum Products and Lubricants

NEW STANDARD

Volume 05.04, 2005
D 6971-04, Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry
D 7041-04, Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels, and Oils by Online Gas Chromatography with Flame Photometric Detection
D 7042-04, Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer and the Calculation of Kinematic Viscosity
D 7043-04, Test Method for Indicating Wear Characteristics of Petroleum and Non-petroleum Hydraulic Fluids in a Constant Volume Vane Pump
D 7059-04, Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography
D 7061-04, Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device

REVISION OF STANDARD

Volume 05.01, 2005
D 910-04, Specification for Aviation Gasolines
D 975-04b, Specification for Diesel Fuel Oils
D 976-04, Test Methods for Calculated Cetane Index of Distillate Fuels
D 1500-04, Test Method for ASTM Color of Petroleum Products ASTM Color Scale
D 1655-04, Specification for Aviation Turbine Fuels
D 2887-04a, Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography

Volume 05.02, 2005
D 3241-04, Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
D 3338-04, Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
D 3948-04, Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
D 4625-04, Test Method for Middle Distillate Fuel Storage Stability at 43°C (110°F)
D 4740-04, Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test
D 4806-04a, Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
D 4814-04, Specification for Automotive Spark-Ignition Engine Fuel

Volume 05.03, 2005
D 6227-04, Specification for Grade 82 Unleaded Aviation Gasoline
D 6352-04, Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700°C by Gas Chromatography
D 6424-04, Practice for Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines

Volume 05.04, 2005
D 6615-04, Specification for Jet B Wide-Cut Aviation Turbine Fuel
D 6812-04, Practice for Ground-Based Octane Rating Procedures for Turbocharged/Supercharged Spark Ignition Aircraft Engines

EDITORIAL CHANGE

Volume 05.04, 2005
D 6984-03 e1, Test Method for Evaluation of Automotive Engine Oils in the Sequence III F, Spark-Ignition Engine

REAPPROVAL OF STANDARD

Volume 05.01, 2005
D 127-87 (2004)

Volume 05.03, 2005
D 5798-99 (2004)

Volume 05.04, 2005
D 6421-99a(2004)
D 6423-99 (2004)

D04 on Road and Paving Materials

REVISION OF STANDARD

Volume 04.03, 2005
D 4280-04, Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers
D 5340-04, Test Method for Airport Pavement Condition Index Surveys

D05 on Coal and Coke

REVISION OF STANDARD

Volume 05.06, 2004
D 1857-04, Test Method for Fusibility of Coal and Coke Ash
D 3174-04, Test Method for Ash in the Analysis Sample of Coal and Coke from Coal
D 4239-04a, Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High-temperature Tube Furnace Combustion Methods
D 5142-04, Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures

EDITORIAL CHANGE

Volume 05.06, 2004
D 346-04 e1, Practice for Collection and Preparation of Coke Samples for Laboratory Analysis

D08 on Roofing and Waterproofing

NEW STANDARD

Volume 04.04, 2005
D 6950-04, Practice for Application of Heat Weldable Atactic Polypropylene (APP) Modified Bituminous Waterproofing Membranes Systems for New Building Decks

REVISION OF STANDARD

Volume 04.04, 2005
D 228-04, Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
D 4869-04, Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steep Slope Roofing
D 6757-04, Specification for Steep-Slope Underlayment Felt Containing Inorganic Fibers

D11 on Rubber

REVISION OF STANDARD

Volume 09.01, 2005
D 573-04, Test Method for Rubber—Deterioration in an Air Oven
D 1566-04a, Terminology Relating to Rubber
D 2240-04, Test Method for Rubber Property—Durometer Hardness

REAPPROVAL OF STANDARD

Volume 09.01, 2005
D 1415-88 (2004)

D13 on Textiles

NEW STANDARD

Volume 07.02, 2004
D 7016-04, Test Method for Evaluate Edge Binding Components Used in Mattresses After Exposure to an Open Flame

REVISION OF STANDARD

Volume 07.02, 2004
D 5684-04, Terminology Relating to Pile Floor Coverings

D16 on Aromatic Hydrocarbons and Related Chemicals

REVISION OF STANDARD

Volume 06.04, 2005
D 1555-04, Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane
D 1555M-04, Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane Metric

EDITORIAL CHANGE

Volume 06.04, 2005
D 2360-04A e1, Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography

REAPPROVAL OF STANDARD

Volume 06.04, 2005
D 1631-99 (2004)

NEW STANDARD

Volume 06.04, 2005
D 7011-04, Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection

D18 on Soil and Rock

NEW STANDARD

Volume 04.09, 2005
D 7047-04, Test Method for Mucilloid Content of Plantago Insularis (Ovata, Psyllium) Used as a Tackifier
D 6914-04, Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices

REVISION OF STANDARD

Volume 04.08, 2004
D 1411-04, Test Methods for Water-soluble Chlorides Present as Admixtures in Graded Aggregate Road Mixes
D 2664-04, Test Method for Triaxial Compressive Strength of Undrained Rock Core Specimens Without Pore Pressure Measurements
D 2922-04, Test Methods for Density of Soil and Soil-aggregate in Place by Nuclear Methods (Shallow Depth)
D 3017-04, Test Method for Water Content of Soil and Rock in Place by Nuclear Methods (Shallow Depth)
D 4394-04, Test Method for Determining the in Situ Modulus of Deformation of Rock Mass Using the Rigid Plate Loading Method
D 4525-04, Test Method for Permeability of Rocks by Flowing Air

Volume 04.08, 2005
D 2980-04, Test Method for Volume Mass, Moisture-holding Capacity, and Porosity of Saturated Peat Materials
D 4435-04, Test Method for Rock Bolt Anchor Pull Test
D 4436-04, Test Method for Rock Bolt Long-term Load Retention Test
D 4543-04, Practices for Preparing Rock Core Specimens and Determining Dimensional and Shape Tolerances
D 5084-03, Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter

Volume 04.09, 2004
D 6724-04, Guide for Installation of Direct Push Ground Water Monitoring Wells
D 6725-04, Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers

REAPPROVAL OF STANDARD WITH EDITORIAL CHANGE

Volume 04.08, 2005
D 1558-99 (2004)e1

REAPPROVAL OF STANDARD

Volume 04.08, 2005
D 3404-91 (2004)
D 4043-96 (2004)
D 4404-84 (2004)
D 5126-90 (2004)
D 5254-92 (2004)
D 5408-93 (2004)
D 5409-93 (2004)

Volume 04.09, 2004
D 5922-96 (2004)

Volume 04.09, 2005
D 2973-71 (2004)
D 2976-71 (2004)
D 5923-96 (2004)
D 5924-96 (2004)
D 6167-97 (2004)
D 6274-98 (2004)

D19 on Water

REVISION OF STANDARD

Volume 11.01, 2004
D 1179-04, Test Methods for Fluoride Ion in Water

Volume 11.01, 2005
D 512-04, Test Methods for Chloride Ion in Water
D 3867-04, Test Methods for Nitrite-nitrate in Water

Volume 11.02, 2004
D 3648-04, Practices for the Measurement of Radioactivity
D 5315-04 (Includes change to title), Test Method for Determination of N-methyl-carbamoyloximes and N-methylcarbamates in Water by Direct Aqueous Injection Hplc with Post-column Derivatization

D20 on Plastics

REVISION OF STANDARD

Volume 08.01, 2005
D 648-04, Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
D 1621-04, Test Method for Compressive Properties of Rigid Cellular Plastics

Volume 08.02, 2005
D 3014-04a, Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position
D 3576-04, Test Method for Cell Size of Rigid Cellular Plastics
D 4101-04a, Specification for Polypropylene Injection and Extrusion Materials
D 4321-04, Test Method for Package Yield of Plastic Film

Volume 08.03, 2005
D 5132-04, Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles
D 5140-00, Guide for Testing Polyurethane
D 6042-04, Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (Lc)
D 6866-04a, Test Methods for Determining the Biobased Content of Natural Range Materials Using Radiocarbon and Isotope Ratio Mass Spectrometry Analysis
D 6980-04, Test Method for Determination of Moisture in Plastics by Loss in Weight

EDITORIAL CHANGE

Volume 08.03, 2005
D 6110-04e1, Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics

REAPPROVAL OF STANDARD WITH EDITORIAL CHANGE

Volume 08.04, 2002
D 5206-96 (2002)e1

D24 on Carbon Black

REVISION OF STANDARD

Volume 09.01, 2005
D 1514-04, Test Method for Carbon Black—Sieve Residue
D 1765-04a, Classification System for Carbon Blacks Used in Rubber Products
D 3053-04a, Terminology Relating to Carbon Black
D 3493-04a, Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN)

REAPPROVAL OF STANDARD

Volume 09.01, 2005
D 1618-99 (2004)
D 4527-99 (2004)

D27 on Electrical Insulating Liquids and Gases

WITHDRAWAL OF STANDARD

Volume 10.03, 2005
D 2283-86(1997), Specification for Chlorinated Aromatic Hydrocarbons Askarels for Transformers

D32 on Catalysts

REVISION OF STANDARD

Volume 05.05, 2005
D 6761-04, Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers

D35 on Geosynthetics

NEW STANDARD

Volume 04.13, 2005
D 7056-04, Test Method for Determining the Tensile Shear Strength of Pre-fabricated Bituminous Geomembrane Seams

REVISION OF STANDARD

Volume 04.09, 2004
D 6768-04, Test Method for Tensile Strength of Geosynthetic Clay Liners

Volume 04.13, 2005
D 5884-04a, Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes

REAPPROVAL OF STANDARD

Volume 04.13, 2005
D 5993-99 (2004)
D 6141-97 (2004)
D 6244-98 (2004)
D 6364-99 (2004)