EDITORIAL CHANGE

Volume 06.01, 2005
D 6902-04e1, Test Method for Laboratory Measurement of Formaldehyde Evolved During the Curing of Melamine-Formaldehyde-Based Coatings

Volume 06.03, 2005
D 6887-03e1, Test Method for Testing Alkyd Compatibility with Resin or Resin Solutions

REAPPROVAL OF STANDARD

Volume 06.02, 2005
D 713-90 (2004)

D02 on Petroleum Products and Lubricants

ERRATUM
ASTM D 5191-04, Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method), has been replaced by D 5191-04a. A correction was made in Section 10.1.1. The corrected version is available from www.astm.org.

NEW STANDARD

Volume 05.04, 2005
D 7040-04, Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
D 7042-04, Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
D 7058-04, Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer

REVISION OF STANDARD

Volume 05.01, 2005
D 976-04a, Test Method for Calculated Cetane Index of Distillate Fuels

Volume 05.02, 2005
D 4814-04a, Specification for Automotive Spark-Ignition Engine Fuel

EDITORIAL CHANGE

Volume 05.01, 2005
D 2500-02e1, Test Method for Cloud Point of Petroleum Products

Volume 05.02, 2005
D 4175-02Ae2, Terminology Relating to Petroleum, Petroleum Products, and Lubricants
D 4539-03e1, Test Method for Filterability of Diesel Fuels by Low-temperature Flow Test (LTFT)
D 4929-99e1, Test Methods for Determination of Organic Chloride Content in Crude Oil
D 5185-02e2, Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission

Volume 05.03, 2005
D 6352-04e1, Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700°C by Gas Chromatography

Volume 05.04, 2005
D 6896-03e1, Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature

D04 on Road and Paving Materials

NEW STANDARD
Volume 04.03, 2003
D 6927-04, Test Method for Marshall Stability and Flow of Bituminous Mixtures

Volume 04.03, 2004
D 6926-04, Practice for Preparation of Bituminous Specimens Using Marshall Apparatus
D 6929-04, Practice for Freezing of Emulsified Asphalts
D 6930-04, Test Method for Settlement and Storage Stability of Emulsified Asphalts
D 6932-04, Guide for Materials and Construction of Open-graded Friction Course Plant Mixtures
D 6933-04, Test Method for Oversized Particles in Emulsified Asphalts Sieve Test
D 6934-04, Test Method for Residue by Evaporation of Emulsified Asphalt
D 6935-04, Test Method for Determining Cement Mixing of Emulsified Asphalt
D 6936-04, Test Method for Determining Demulsibility of Emulsified Asphalt
D 6937-04, Test Method for Determining Density of Emulsified Asphalt
D 6997-04, Test Method for Distillation of Emulsified Asphalt
D 6998-04, Practice for Evaluating Aggregate Coating Using Emulsified Asphalts
D 6999-04, Practice for Miscibility of Emulsified Asphalts
D 7064-04, Practice for Open-graded Friction Course (OGFC) Mix Design

REVISION OF STANDARD

Volume 04.03, 2004
D 2872-04, Test Method for Effect of Heat and Air on a Moving Film of Asphalt Rolling Thin-film Oven Test
D 3666-04, Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
D 6307-04, Test Method for Asphalt Content of Hot-mix Asphalt by Ignition Method

D07 on Wood

REVISION OF STANDARD

Volume 04.10, 2005
D 246-04, Test Method for Distillation of Creosote and Creosote-coal Tar Solutions
D 347-04, Tables for Volume and Specific Gravity Correction for Creosote, Creosote-coal Tar Solution, and Coal Tar

D08 on Roofing and Waterproofing

REVISION OF STANDARD

Volume 04.04, 2005
D 146-04, Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing
D 2626-04, Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing
D 4434-04, Specification for Poly(Vinyl Chloride) Sheet Roofing
D 4637-04, Specification for EPDM Sheet Used in Single-Ply Roof Membrane

EDITORIAL CHANGE

Volume 04.04, 2005
D 5147-02Ae1, Test Methods for Sampling and Testing Modified Bituminous Sheet Material
D 6225-98e1, Test Method for Granule Cover of Mineral Surfaced Roofing

D10 on Packaging

REVISION OF STANDARD

Volume 15.09, 2004
D 6344-04, Test Method for Concentrated Impacts to Transport Packages

D11 on Rubber

EDITORIAL CHANGE

Volume 09.02, 2005
D 2000-03Ae1, Classification System for Rubber Products in Automotive Applications

D13 on Textiles

NEW STANDARD

Volume 07.02, 2004
D 6963-04, Terminology Relating to Sewn Products Automation

D14 on Adhesives

REAPPROVAL OF STANDARD

Volume 15.06, 2005
D 4497-94 (2004)

D15 on Engine Coolants

EDITORIAL CHANGE

Volume 15.05, 2005
D 1384-01e1, Test Method for Corrosion Test for Engine Coolants in Glassware
D 6210-03e1, Specification for Fully-formulated Glycol Base Engine Coolant for Heavy-duty Engines

D16 on Aromatic Hydrocarbons and Related Chemicals

REVISION OF STANDARD

Volume 06.04, 2005
D 2360-04a, Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography
D 2827-04, Specification for Styrene Monomer
D 5060-95 (2000)e1, Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography

EDITORIAL CHANGE

Volume 06.04, 2005
D 1555-04e1, Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane
D 1555M-04e1, Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric]
D 3760-02e1, Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography
D 5135-02e1, Test Method for Analysis of Styrene by Capillary Gas Chromatography

D18 on Soil and Rock

NEW STANDARD

Volume 04.09, 2005
D 7069-04, Guide for Field Quality Assurance in a Ground-water Sampling Event

REVISION OF STANDARD

Volume 04.08, 2005
D 4944-04 (Includes Change to Title), Test Method for Field Determination of Water Moisture Content of Soil by the Calcium Carbide Gas Pressure Tester

D20 on Plastics

REVISION OF STANDARD

Volume 08.01, 2005
D 1238-04a, Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
D 2578-04a, Test Method for Wetting Tension of Polyethylene and Polypropylene Films

D33 on Protective Coating and Lining Work for Power Generation Facilities

REVISION OF STANDARD

Volume 06.02, 2005
D 4537-04a, Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating Work Inspection in Nuclear Facilities
D 5161-04a, Guide for Specifying Inspection Requirements for Coating and Lining Work Metal Substrates

D35 on Geosynthetics

REVISION OF STANDARD

Volume 04.13, 2005
D 4439-04, Terminology for Geosynthetics
D 5262-04, Test Method for Evaluating the Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics
D 5617-04, Test Method for Multi-axial Tension Test for Geosynthetics
D 5887-04, Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter
D 6102-04, Guide for Installation of Geosynthetic Clay Liners
D 6434-04, Guide for the Selection of Test Methods for Flexible Polypropylene (fPP) Geomembranes
D 6496-04, Test Method for Determining Average Bonding Peel Strength Between Top and Bottom Layers of Needle-punched Geosynthetic Clay Liners
D 6693-04, Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes