REVISION OF STANDARD

Volume 04.01, 2004
C 191-04a, Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle
C 490-04, Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
C 1038-04, Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water
C 1565-04, Test Method for Determination of Pack-set Index of Portland Cement

Volume 04.01, 2005
C 114-04a, Test Methods for Chemical Analysis of Hydraulic Cement
C 150-04a, Specification for Portland Cement
C 563-04, Test Method for Optimum SO3 in Hydraulic Cement Using 24-h Compressive Strength
C 806-04, Test Method for Restrained Expansion of Expansive Cement Mortar
C 845-04, Specification for Expansive Hydraulic Cement

REAPPROVAL OF STANDARD

Volume 04.01, 2005
C 1365-98 (2004)

C07 on Lime

REVISION OF STANDARD

Volume 04.01, 2005
C 110-04, Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone

C09 on Concrete and Concrete Aggregates

NEW STANDARD

Volume 04.02, 2005
C 1567-04, Test Method for Determining the Potential Alkali-silica Reactivity of Combinations of Cementitious Materials and Aggregate Accelerated Mortar-bar Method
C 1581-04, Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete Under Restrained Shrinkage

REVISION OF STANDARD

Volume 04.02, 2004
C 42/C 42M-04, Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
C 94/C 94M-04a, Specification for Ready-mixed Concrete
C 232-04, Test Methods for Bleeding of Concrete
C 294-04, Descriptive Nomenclature for Constituents of Concrete Aggregates

Volume 04.02, 2005
C 117-04, Test Method for Materials Finer Than 75-um (no. 200) Sieve in Mineral Aggregates by Washing
C 123-04, Test Method for Lightweight Particles in Aggregate
C 127-04, Test Method for Density, Relative Density Specific Gravity, and Absorption of Coarse Aggregate
C 128-04, Test Method for Density, Relative Density Specific Gravity, and Absorption of Fine Aggregate
C 136-04, Test Method for Sieve Analysis of Fine and Coarse Aggregates
C 231-04, Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
C 311-04, Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-cement Concrete
C 387-04, Specification for Packaged, Dry, Combined Materials for Mortar and Concrete
C 567-04, Test Method for Determining Density of Structural Lightweight Concrete
C 873-04, Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds
C 1064/C 1064M-04 (Includes Change to Title), Test Method for Temperature of Freshly Mixed Hydraulic-cement Concrete
C 1074-04, Practice for Estimating Concrete Strength
C 1152/C 1152M-04, Test Method for Acid-soluble Chloride in Mortar and Concrete
C 1383-04, Test Method for Measuring the P-wave Speed and the Thickness of Concrete Plates Using the Impact-echo Method
C 1399-04, Test Method for Obtaining Average Residual-strength of Fiber-reinforced Concrete
C 1556-04, Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion

REAPPROVAL OF STANDARD

Volume 04.02, 2004
C 1436-99 (2004)

Volume 04.02, 2005
C 142-97 (2004)

WITHDRAWAL OF STANDARD

Volume 04.02, 2005
C 801-98, Test Method for Determining the Mechanical Properties of Hardened Concrete Under Triaxial Loads

EDITORIAL CHANGE

Volume 04.02, 2004
C 1385/C 1385M, Practice for Sampling Materials for Shotcrete

C11 on Gypsum and Related Building Materials and Systems

REVISION OF STANDARD

Volume 04.01, 2004
C 754-04, Specification for Installation of Steel Framing Members to Receive Screw-attached Gypsum Panel Products

Volume 04.01, 2005
C 1397-04, Practice for Application of Class Pb Exterior Insulation and Finish Systems

C12 on Mortars and Grouts for Unit Masonry

REVISION OF STANDARD

Volume 04.05, 2004
C 270-04, Specification for Mortar for Unit Masonry

C13 on Concrete Pipe

REVISION OF STANDARD

Volume 04.05, 2004
C 76-04, Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
C 76M-04, Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe [Metric]

REINSTATEMENT OF STANDARD

Volume 04.05, 2005
C 1244M-04 (Includes Change to Title), Test Method for Concrete Sewer Manholes by the Negative Air Pressure Vacuum Test Prior to Backfill [Metric]

C17 on Fiber-Reinforced Cement Products

EDITORIAL CHANGE

Volume 04.05, 2004
C 1459-04e1, Specification for Performance of Non-asbestos Fiber-reinforced Cement Shake, Shingle, and Slate Roofing Systems

C21 on Ceramic Whitewares and Related Products

REVISION OF STANDARD

Volume 15.02, 2004
C 650-04, Test Method for Resistance of Ceramic Tile to Chemical Substances

C24 on Building Seals and Sealants

REVISION OF STANDARD

Volume 04.07, 2004
C 717-04a, Terminology of Building Seals and Sealants
C 793-04, Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
C 1277-04, Specification for Shielded Couplings Joining Hubless Cast Iron Soil
C 1382-04, Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems EIFS Joints
C 1501-04, Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
C 1540-04, Specification for Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings

C26 on Nuclear Fuel Cycle

REVISION OF STANDARD

Volume 12.01, 2004
C 1174-04, Practice for Prediction of the Long-term Behavior of Materials, Including Waste Forms, Used in Engineered Barrier Systems (EBS) for Geological Disposal of High-level Radioactive Waste