|
|
F01 on Electronics
REVISION OF STANDARD
Volume 10.05, 2001
F 110-00, Test Method for Thickness of Epitaxial or Diffused Layers
in Silicon by the Angle Lapping and Staining Technique
F 374-00 (Includes change to title), Test Method for Sheet Resistance
of Silicon Epitaxial, Diffused, Polysilicon, and Ion-Implanted
Layers Using an In-Line Four-Point Probe with the Single-Configuration
Procedure
F 525-00, Test Method for Measuring Resistivity of Silicon Wafers
Using a Spreading Resistance Probe
F 1389-00, Test Methods for Photoluminescence Analysis of Single
Crystal Silicon for III-V Impurities
F 1535-00, Test Method for Carrier Recombination Lifetime in Silicon
Wafers by Noncontact Measurement of Photoconductivity Decay by
Microwave Reflectance
F04 on Medical and Surgical Materials and Devices
NEW STANDARD
Volume 13.01, 2000
F 2025-00, Practice for Gravimetric Measurement of Polymeric Components
for Wear Assessment
F 2027-00, Guide for Characterization and Testing of Substrate
Materials for Tissue-Engineered Medical Products
F 2033-00, Specification for Total Hip Joint Prosthesis and Hip
Endoprosthesis Bearing Surfaces Made of Metallic, Ceramic, and
Polymeric Materials
REVISION OF STANDARD
Volume 13.01, 2000
F 562-00 (Includes change to title), Specification for Wrought
Cobalt-35 Nickel-20 Chromium-10 Molybdenum Alloy for Surgical
Implant Applications UNS R30035
F 620-00 (Includes change to title), Specification for Alpha Plus
Beta Titanium Alloy Forgings for Surgical Implants
F 754-00, Specification for Implantable Polytetrafluoroethylene
(PTFE) Polymer Fabricated in Sheet, Tube, and Rod Shapes
F06 on Resilient Floor Coverings
NEW STANDARD
Volume 15.04, 2000
F 2034-00, Specification for Sheet Linoleum Floor Covering
F07 on Aerospace and Aircraft
REAPPROVAL OF STANDARD
Volume 15.03, 2000
F 320-94 (1999)
F 330-89 (1999)
F 1113-87 (1999)
F08 on Sports Equipment and Facilities
NEW STANDARD
Volume 15.07, 2000
F 2031-00, Test Method for Measurement of Arrow Shaft Static Spine
Stiffness
F 2041-00, Specification for Paintball Marker Warnings
F 2043-00, Classification for Bicycle Usage
REVISION OF STANDARD
Volume 15.07, 2000
F 429-00, Test Method for Shock-Attenuation Characteristics of
Protective Headgear for Football
F 513-00, Safety Specification for Eye and Face Protective Equipment
for Hockey Players
F 697-00, Practice for Care and Use of Athletic Mouth Protectors
F 869-00, Terminology Relating to Athletic Shoes and Biomechanics
F 1250-00 (Includes change to title), Safety Specification for
Stationary Exercise Bicycles
F 1446-00, Test Methods for Equipment and Procedures Used in Evaluating
the Performance Characteristics of Protective Headgear
F 1625-00 (Includes change to title), Specification and Test Method
for Rear-Mounted Bicycle Child Carriers
F 1849-00, Specification for Helmets Used in Short Track Speed
Ice Skating Not to Include Hockey
F 1898-00, Specification for Bicycle Helmets Used by Infants and
Toddlers
F 1952-00, Specification for Helmets Used for Downhill Mountain
Bicycle Racing
F 1975-00, Specification for Nonpowered Bicycle Trailers Designed
for Human Passengers
REAPPROVAL OF STANDARD
Volume 15.07, 2000
F 717-89 (2000)
F 1162-88 (1999)
F09 on Tires
REVISION OF STANDARD
Volume 09.02, 2001
F 1082-00, Practice for Tires—Determining Precision for Test Method
Standards
REAPPROVAL OF STANDARD
Volume 09.02, 2000
F 1082-00 (2000)
F13 on Safety and Traction for Footwear
NEW STANDARD
Volume 15.07, 2000
F 2048-00, Practice for Reporting Slip Resistance Test Results
F15 on Consumer Products
NEW STANDARD
Volume 15.07, 2000
F 2012-00, Consumer Safety Performance Specification for Stationary
Activity Centers
REVISION OF NEW STANDARD
Volume 15.07 2000
F 2050-00, Consumer Safety Performance Specification for Hand-Held
Infant Carriers
PS 91-00, Provisional Specification for Portable Gasoline and
Kerosine Spill Resistant Fueling Systems for Consumer Use
REAPPROVAL OF STANDARD
Volume 15.07, 2000
F 444-88 (1999)
F 445-88 (1999)
F 446-85 (1999)
F 462-79 (1999)
F 590-92 (1992)
F 834-84 (1999)
F 1313-90 (1999)
F 1562-95 (1999)
F 1615-95 (1999)
F16 on Fasteners
REVISION OF STANDARD
Volume 01.08, 2001
A 31-00, Specification for Steel Rivets and Bars for Rivets, Pressure
Vessels
A 307-00, Specification for Carbon Steel Bolts and Studs, 60 000
PSI Tensile Strength
A 325M-00, Specification for High-Strength Bolts for Structural
Steel Joints [Metric]
A 354-00, Specification for Quenched and Tempered Alloy Steel
Bolts, Studs, and Other Externally Threaded Fasteners
A 394-00, Specification for Steel Transmission Tower Bolts, Zinc-Coated
and Bare
A 449-00, Specification for Quenched and Tempered Steel Bolts
and Studs
A 489-00, Specification for Carbon Steel Lifting Eyes
A 490-00, Specification for Heat-Treated Steel Structural Bolts,
150 ksi Minimum Tensile Strength
A 490M-00, Specification for High-Strength Steel Bolts, Classes
10.9 and 10.9.3, for Structural Steel Joints [Metric]
A 574-00, Specification for Alloy Steel Socket-Head Cap Screws
A 574M-00, Specification for Alloy Steel Socket-Head Cap Screws
[Metric]
F 541-00, Specification for Alloy Steel Eyebolts
F 835-00, Specification for Alloy Steel Socket Button and Flat
Countersunk Head Cap Screws
F 835M-00, Specification for Alloy Steel Socket Button and Flat
Countersunk Head Cap Screws [Metric]
F 844-00, Specification for Washers, Steel, Plain (Flat), Unhardened
for General Use
F 912-00, Specification for Alloy Steel Socket Set Screws
F 912M-00, Specification for Alloy Steel Socket Set Screws [Metric]
F 1789-00, Terminology for F16 Mechanical Fasteners
F 1852-00, Specification for “Twist Off” Type Tension Control
Structural Bolt/ Nut/Washer Assemblies, Steel, Heat Treated, 120/105
ksi Minimum Tensile Strength
F17 on Plastic Piping Systems
NEW STANDARD
Volume 08.04, 2001
F 2018-00, Test Method for Time-to-Failure of Plastics Using Plane
Strain Tensile Specimens
F 2019-00, Practice for Rehabilitation of Existing Pipelines and
Conduits by the Pulled in Place Installation of Glass Reinforced
Plastic (Grp) Cured-In-Place Thermosetting Resin Pipe (CIPP)
REVISION OF STANDARD
Volume 08.04, 2001
D 2321-00, Practice for Underground Installation of Thermoplastic
Pipe for Sewers and Other Gravity-Flow Applications
D 2513-00, Specification for Thermoplastic Gas Pressure Pipe,
Tubing, and Fittings
D 3034-00, Specification for Type PSM Poly(Vinyl Chloride) (PVC)
Sewer Pipe and Fittings
F 480-00, Specification for Thermoplastic Well Casing Pipe and
Couplings Made in Standard Dimension Ratios (SDR) , SCH 40 and
SCH 80
F 628-00, Specification for Acrylonitrile-Butadiene-Styrene (ABS)
Schedule 40 Plastic Drain, Waste, and Vent Pipe with a Cellular
Core
F 679-00, Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter
Plastic Gravity Sewer Pipe and Fittings
F 876-00, Specification for Crosslinked Polyethylene (PEX) Tubing
F 891-00, Specification for Coextruded Poly(Vinyl Chloride) (PVC)
Plastic Pipe with a Cellular Core
F 1281-00, Specification for Crosslinked Polyethylene/ Aluminum/Crosslinked
Polyethylene (PEX-AL-PEX) Pressure Pipe
F 1282-00, Specification for Polyethylene/Aluminum/Polyethylene
(PE-AL-PE) Composite Pressure Pipe
F 1498-00, Specification for Taper Pipe Threads 60 degree for
Thermoplastic Pipe and Fittings
F 1499-00, Specification for Coextruded Composite Drain, Waste,
and Vent Pipe (DWV)
F 1960-00, Specification for Cold Expansion Fittings with PEX
Reinforcing Rings for Use with Cross-Linked Polyethylene (PEX)
Tubing
F 1986-00a (Includes change to title), Specification for Multilayer
Pipe Type 2, Compression Fittings, and Compression Joints for
Hot and Cold Drinking-Water Systems
F 1987-00a (Includes change to title), Specification for Multilayer
Pipe Type 2, Compression Fittings, and Compression Joints for
Hydronic Heating Systems
F18 on Electrical Protective Equipment for Workers
REVISION OF STANDARD
Volume 10.03, 2001
F 1506-00, Performance Specification for Flame Resistant Textile
Materials for Wearing Apparel for Use by Electrical Workers Exposed
to Momentary Electric Arc and Related Thermal Hazards
F26 on Food Service Equipment
REAPPROVAL OF STANDARD
Volume 15.08 2000
F 760-93 (2000)
F 1022-95 (2000)
F 1827-97 (2000)
F30 on Emergency Medical Services
WITHDRAWAL OF STANDARD
Volume 13.01 2000
F 1119-91, Specification for Rotary Wing Basic Life Support Transport
Units
F 1146-91, Specification for Rotary Wing Specialized Medical Transport
Units
Copyright 2000, ASTM
Back to Contents |
