|
D01 on Paint and Related Coatings, Materials, and Applications
NEW STANDARD
Volume 06.02
D 7089-06, Practice for Determination of the Effectiveness of Anti-Graffiti Coating for Use on Concrete, Masonry and Natural Stone Surfaces by Pressure Washing
D 7127-05, Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument
D 7234-05, Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
REVISION OF STANDARD
Volume 06.03
D 464-05, Test Methods for Saponification Number of Naval Store Products Including Tall Oil and Other Related Products
D 465-05, Test Methods for Acid Number of Naval Stores Products Including Tall Oil and Other Related Products
REAPPROVAL OF STANDARD
Volume 06.01
D 3273-00(2005)
D 5590-00(2005)
Volume 06.03
D 5974-00(2005)
D 6387-99(2005)
WITHDRAWAL OF STANDARD
Volume 06.03
D 261-75(1999), Specification for Iron Blue Pigment
D 262-81(1999), Specification for Ultramarine Blue Pigment
D02 on Petroleum Products and Lubricants
NEW STANDARD
Volume 05.04
D 7212-06, Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-Ray Fluorescence Spectrometry Using a Low-Background Proportional Counter
D 7220-06, Test Method for Sulfur in Automotive Fuels by Polarization X-Ray Fluorescence Spectrometry
D 7235-05, Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
REVISION OF STANDARD
Volume 05.01
D 664-06, Test Method for Acid Number of Petroleum Products by Potentiometric Titration
D 1655-06, Specification for Aviation Turbine Fuels
D 2386-06, Test Method for Freezing Point of Aviation Fuels
D 2624-06, Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
D 2896-06, Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
Volume 05.02
D 4530-06, Test Method for Determination of Carbon Residue (Micro Method)
Volume 05.04
D 6744-06, Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
D 6745-06, Test Method for Linear Thermal Expansion of Electrode Carbons
Volume 05.05
D 2699-06a, Test Method for Research Octane Number of Spark-Ignition Engine Fuel
D 2700-06, Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
D04 on Road and Paving Materials
NEW STANDARD
Volume 04.03
D 7172-06, Test Method for Determining the Relative Density (Specific Gravity) and Absorption of Fine Aggregates Using Infrared
D 7196-06, Test Method for Raveling Test of Cold Mixed Bituminous Emulsion Samples
D 7227-06, Practice for Rapid Drying of Compacted Asphalt Specimens Using Vacuum Drying Apparatus
REVISION OF STANDARD
Volume 04.03
D 6690-06, Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements
D07 on Wood
WITHDRAWAL OF STANDARD
Volume 04.10
D 1760-01, Specification for Pressure Treatment of Timber Products
D11 on Rubber
NEW STANDARD
Volume 09.02
D 7103-06, Guide for Assessment of Medical Gloves
REVISION OF STANDARD
Volume 09.01
D 813-06, Test Method for Rubber Deterioration — Crack Growth
D 1418-06, Practice for Rubber and Rubber Latices -Nomenclature
D 1566-06, Terminology Relating to Rubber
Volume 09.02
D 3577-06, Specification for Rubber Surgical Gloves
D13 on Textiles
NEW STANDARD
Volume 07.02
D 7197-06, Table of Body Measurements for Misses Maternity Sizes Two to Twenty-Two (2-22)
D 7241-06, Test Method for Pile Thickness of Finished Multilevel Pile Yarn Floor Covering
REVISION OF STANDARD
Volume 07.02
D 5035-06, Test Method for Breaking Force and Elongation of Textile Fabrics Strip Method
D19 on Water
REVISION OF STANDARD
Volume 11.01
D 1129-06, Terminology Relating to Water
Volume 11.02
D 1252-06, Test Methods for Chemical Oxygen Demand Dichromate Oxygen Demand of Water
D 2036-06, Test Methods for Cyanides in Water
REAPPROVAL OF STANDARD
Volume 11.01
D 3856-95(2006)
D 5851-95(2006)
D 6568-00(2006)
Volume 11.02
D 3650-93(2006)
D 5790-95(2006)
D20 on Plastics
NEW STANDARD
Volume 08.03
D 7209-06, Guide for Waste Reduction, Resource Recovery, and Use of Recycled Polymeric Materials and Products
REVISION OF STANDARD
Volume 08.02
D 3814-06, Guide for Locating Combustion Test Methods for Polymeric Materials
D24 on Carbon Black
EDITORIAL CHANGE
Volume 09.01
D 1765-05Ae1, Classification System for Carbon Blacks Used in Rubber Products
D34 on Waste Management
REVISION OF STANDARD
Volume 11.04
D 4547-06, Guide for Sampling Waste and Soils for Volatile Organic Compounds
D 5370-06, Specification for Pozzolanic Blended Materials in Construction Applications
REAPPROVAL OF STANDARD
Volume 11.04
D 4687-95(2006)
D 5368-93(2006)
D 5659-95(2006)
D 5830-95(2006)
E 688-94(2006)
E 708-79(2006)
D35 on Geosynthetics
NEW STANDARD
Volume 04.13
D 7240-06, Practice for Leak Location Using Geomembranes with an Insulating Layer in Intimate Contact with a Conductive Layer Via Electrical Capacitance Technique (Conductive Geomembrane Spark Test)
REVISION OF STANDARD
Volume 04.13
D 5514-06, Test Method for Large Scale Hydrostatic Puncture Testing of Geosynthetics
D 5890-06, Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners
D 6102-06, Guide for Installation of Geosynthetic Clay Liners
D 7001-06, Specification for Geocomposites for Pavement Edge Drains and Other High-flow Applications
|
