NEW STANDARD
Volume 06.03, 2005
D 6989-03, Practices for Preparation of Solvent and Water Based Ink Resin Solutions

REVISION OF STANDARD
Volume 06.01, 2005
D 1640-03, Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature

WITHDRAWAL OF STANDARD
Volume 06.02, 2005
D 2571-95, Guide for Testing Wood Furniture Lacquers

REVISION OF STANDARD
Volume 06.02, 2005
D 5146-03, Guide to Testing Solvent-Borne Architectural Coatings

REVISION OF STANDARD
Volume 06.03, 2005
D 1439-03, Test Methods for Sodium Carboxymethylcellulose
D 1726-03, Test Methods for Hydrolyzable Chloride Content of Liquid Epoxy Resins
D 5400-03, Test Methods for Hydroxypropylcellulose

WITHDRAWAL OF STANDARD
Volume 06.03, 2005
D 1347-72 (1995), Test Methods for Methylcellulose
D 1358-86 (1995), Test Method for Spectrophotometric Diene Value of Dehydrated Castor Oil and Its Derivatives
D 1466-86 (1995), Test Method for Sampling Liquid Oils and Fatty Acids Commonly Used in Paints, Varnishes, and Related Materials
D 1467-89 (1995), Guide for Testing Fatty Acids Used in Protective Coatings
D 1615-60(1995), Test Methods for Glycerol, Ethylene Glycol, and Pentaerythritol in Alkyd Resins
D 1950-86 (1995), Test Method for Acetone Tolerance of Heat-Bodied Drying Oils
D 1951-86 (1995), Test Method for Ash in Drying Oils and Fatty Acids
D 1952-86 (1995), Test Method for Quantitative Determination of Break in Drying Oils
D 1954-86 (1995), Test Method for Foots in Raw Linseed Oil (Volumetric Method)
D 1955-95 (1995), Test Method for Gel Time of Drying Oils
D 1958-86 (1995), Test Method for Chloroform Insoluble Matter in Oiticica Oil
D 1960-86 (1995), Test Method for Loss on Heating of Drying Oils D 1964-85 (1995), Test Method for Tung Oil Quality
D 1967-86 (1995), Test Method for Color After Heating of Drying Oils
D 1983-90 (1995), Test Method for Fatty Acid Composition by Gas-Liquid Chromatography of Methyl Esters
D 2078-86 (1995), Test Method for Iodine Value of Fatty Quaternary Ammonium Chlorides

REAPPROVAL OF STANDARD
Volume 06.03, 2005
D 81-87 (2003)
D 444-88 (2003)
D 890-98 (2003)
D 1301-91 (2003)
D 1648-86 (2003)
D 1844-86 (2003)
D 1845-86 (2003)
D 4487-90 (2003)
D 6280-98 (2003)

D02 on Petroleum Products and Lubricants

NEW STANDARD
Volume 05.04, 2005
D 6891-03, Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-ignition Engine
D 6969-03, Practice for Preparation of Calcined Petroleum Coke Samples for Analysis
D 6970-03, Practice for Collection of Calcined Petroleum Coke Samples for Analysis
D 6973-03, Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
D 6974-03, Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels —Filtration and Culture Procedures
D 6975-03, Test Method for Cummins M11 EGR Test
D 6984-03, Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-ignition Engine
D 6986-03, Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels Visual Inspection Procedures
D 6987-03, Test Method for Evaluation of Diesel Engine Oils in the T-10 Exhaust Gas Recirculation Diesel Engine

REVISION OF STANDARD
Volume 05.01, 2005
D 341-03, Test Method for Viscosity-temperature Charts for Liquid Petroleum Products
D 665-03, Test Method for Rust-preventing Characteristics of Inhibited Mineral Oil in the Presence of Water
D 910-03a, Specification for Aviation Gasolines
D 1319-03, Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
D 1655-03a, Specification for Aviation Turbine Fuels
D 1835-03a, Specification for Liquefied Petroleum LP Gases
D 1840-03, Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
D 2274-03a, Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
D 2532-03, Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants
D 2887-03, Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
D 2892-03a, Test Method for Distillation of Crude Petroleum 15-theoretical Plate Column
D 2896-03, Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
D 3228-03, Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method
Volume 05.02, 2005
D 3427-03, Test Method for Air Release Properties of Petroleum Oils D 4171-03, Specification for Fuel System Icing Inhibitors
D 4294-03, Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-ray Fluorescence Spectrometry
D 4422-03, Test Method for Ash in Analysis of Petroleum Coke
D 4485-03a, Specification for Performance of Engine Oils
D 4625-03, Test Method for Middle Distillate Fuel Storage Stability at 43°C (110°F)
D 4693-03, Test Method for Low-temperature Torque of Grease-lubricated Wheel Bearings
D 4814-03a, Specification for Automotive Spark-ignition Engine Fuel
D 4857-03, Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-stroke-cycle Gasoline Engines Other Than Outboards
D 5191-03, Test Method for Vapor Pressure of Petroleum Products Mini Method
D 5275-03, Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids
D 5001-03, Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)
D 5006-03, Test Method for Measurement of Fuel System Icing Inhibitors Ether Type in Aviation Fuels
Volume 05.03, 2005
D 5704-03a, Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles
D 5705-03, Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils
D 5800-03a, Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
D 5862-03, Test Method for Evaluation of Engine Oils in Two-Stroke Cycle Turbo-Supercharged 6V92TA Diesel Engine
D 6121-03a, Test Method for Evaluation of Load-carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
Volume 05.04, 2005
D 6352-03, Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700°C by Gas Chromatography
D 6377-03, Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx (Expansion Method)
D 6378-03, Test Method for Determination of Vapor Pressure (VPx) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)
D 6424-03, Practice for Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines
D 6447-03, Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis
D 6557-03, Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils
D 6593-03a, Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-temperature, Light-duty
D 6594-03, Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135 C
D 6709-03a, Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine CLR Oil Test Engine
D 6751-03a, Specification for Biodiesel Fuel Blend Stock B100 for Middle Distillate Fuels
D 6812-03, Practice for Ground-based Octane Rating Procedures for Turbocharged/supercharged Spark Ignition Aircraft Engines
D 6837-03, Test Method for Measurement of the Effects of Automotive Engine Oils on the Fuel Economy of Passenger Cars and Light-duty Trucks in the Sequence VIB Spark Ignition Engine D 6897-03a, Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)
Volume 05.05, 2005
D 2700-03b, Test Method for Motor Octane Number of Spark-ignition Engine Fuel

D04 on Road and Paving Materials

NEW STANDARD
Volume 04.03, 2004
D 7000-04, Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples

REVISION OF STANDARD
Volume 04.03, 2003
D 5329-04, Test Methods for Sealants and Fillers, Hot-applied, for Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements
Volume 04.03, 2004
D 2726-04, Test Method for Bulk Specific Gravity and Density of Non-absorptive Compacted Bituminous Mixtures
D 5893-04, Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements

D10 on Packaging

EDITORIAL CHANGE
Volume 15.09, 2004
D 4577-00e1, Test Method for Compression Resistance of a Container Under Constant Load
D 5330/D 5330M-01e1, Specification for Pressure-sensitive Tape for Packaging, Filament-reinforced

D11 on Rubber

REVISION OF STANDARD
Volume 09.01, 2004
D 3194-04, Test Method for Rubber from Natural Sources —plasticity Retention Index (Pri)

D13 on Textiles

REVISION OF STANDARD
Volume 07.02, 2004
D 3885-04, Test Method for Abrasion Resistance of Textile Fabrics Flexing and Abrasion Method

REAPPROVAL OF STANDARD
Volume 07.02, 2000
D 3939-03 (2004)
D 4772-97 (2004)

D18 on Soil and Rock

NEW STANDARD
Volume 04.09, 2004
D 7014-04, Practice for Assembly and Placement of Double-twisted Wire Mesh Gabions and Revet Mattresses

REVISION OF STANDARD
Volume 04.09, 2004
D 6940-04, Practice for Measuring Sifting Segregation Tendencies of Bulk Solids
D 6941-04, Practice for Measuring Fluidization Segregation Tendencies of Powders

D20 on Plastics

NEW STANDARD
Volume 08.03, 2004
D 6866-04, Test Methods for Determining the Biobased Content of Natural Range Materials Using Radiocarbon and Isotope Ratio Mass Spectrometry Analysis

REVISION OF STANDARD
Volume 08.01, 2004
D 788-04, Classification System for Poly (Methyl Methacrylate) (Pmma) Molding and Extrusion Compounds

Volume 08.02, 2004
D 3014-04, Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position
D 3159-04, Specification for Modified Etfe-Fluoropolymer Molding and Extrusion Materials
D 3368-04, Specification for Fep-fluorocarbon Sheet and Film
D 4000-04, Classification System for Specifying Plastic Materials
Volume 08.03, 2004
D 4894-04, Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials
D 5857-04, Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology
D 5946-04, Test Method for Corona-treated Polymer Films Using Water Contact Angle Measurements
D 6339-04, Specification for Syndiotactic Polystyrene Molding and Extrusion (Sps)

D22 on Sampling and Analysis of Atmospheres

REVISION OF STANDARD
Volume 11.03, 2003
D 6216-03, Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications

D27 on Electrical Insulating Liquids and Gases

REVISION OF STANDARD
Volume 10.03, 2004
D 1816-04, Test Method for Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Using Vde Electrodes

D30 on Composite Materials

REAPPROVAL OF STANDARD
Volume 15.03, 2004
D 5229/D 5229M-92 (2004)
D 6115-97 (2004)
D 6264-98 (2004)
E 1471-92 (2004)

D31 on Leather

EDITORIAL CHANGE
Volume 15.04, 2004
D 5053-03 e1, Test Method for Colorfastness of Crocking of Leather

D33 on Protective Coating and Lining Work for Power Generation Facilities

REVISION OF STANDARD
Volume 06.02, 2005
D 4537-04 (Includes Change to Title), Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating Work Inspection in Nuclear Facilities
D 5161-04, Guide for Specifying Inspection Requirements for Coating and Lining Work (Metal Substrates)
D 5163-04 (Includes Change to Title), Guide for Establishing Procedures to Monitor the Performance of Service Level I Coatings in an Operating Nuclear Power Plant

D34 on Waste Management

REVISION OF STANDARD
Volume 11.04, 2004
D 6418-04, Practice for Using the Disposable En Core Sampler for Sampling and Storing Soil for Volatile Organic Analysis

REAPPROVAL OF STANDARD
Volume 11.04, 2004
D 3987-85 (2004)
D 4793-93 (2004)
D 4843-88 (2004)
D 5115-90 (2004)
D 5284-93 (2004)
D 5359-98 (2004)
D 5513-99 (2004)
D 5929-96 (2004)
D 5975-96 (2004)
D 6270-98 (2004)
D 6346-98 (2004)
E 711-87 (2004)
E 775-87 (2004)
E 776-87 (2004)
E 777-87 (2004)
E 778-87 (2004)
E 790-87 (2004)
E 791-90 (2004)

D35 on Geosynthetics

REVISION OF STANDARD
Volume 04.13, 2004
D 5884-04, Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes