REVISION OF STANDARD
Volume 06.01, 2003
D 2369-03, Test Method for Volatile Content of Coatings
D 6695-03, Practice for Xenon-Arc Exposures of Paint and Related Coatings
Volume 06.01, 2003
D 5179-02, Test Method for Measuring Adhesion of Organic Coatings to Plastic Substrates by Direct Tensile Testing
Volume 06.02, 2003
D 4752-03, Test Method for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub

REAPPROVAL OF STANDARD
Volume 06.01, 2003
D 2349-90 (2003)

REAPPROVAL OF STANDARD WITH EDITORIAL CHANGE
Volume 06.02, 2003
D 1155-89 (2000)e1
D 4707-97 (2003)e1

D02 on Petroleum Products and Lubricants

NEW STANDARD
Volume 05.04, 2004
D 6837-02, Test Method for Measurement of the Effects of Automotive Engine Oils on the Fuel Economy of Passenger Cars and Light-Duty Trucks in the Sequence VIB Spark Ignition Engine
D 6838-02, Test Method for Cummins M11 High Soot Test
D 6839-02, Test Method for Hydrocarbon Types, Oxygenated Compounds and Benzene in Spark Ignition Engine Fuels by Gas Chromatography

REVISION OF STANDARD
Volume 05.01, 2004
D 56-02a, Test Method for Flash Point by Tag Closed Cup Tester
D 92-02b, Test Method for Flash and Fire Points by Cleveland Open Cup Tester
D 93-02a, Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
D 156-02, Test Method for Saybolt Color of Petroleum Products Saybolt Chromometer Method
D 396-02a, Specification for Fuel Oils
D 482-02, Test Method for Ash from Petroleum Products
D 665-02, Test Method for Rust-preventing Characteristics of Inhibited Mineral Oil in the Presence of Water
D 721-02a, Test Method for Oil Content of Petroleum Waxes
D 1321-02a, Test Method for Needle Penetration of Petroleum Waxes
D 1401-02, Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
D 1478-02, Test Method for
Low-temperature Torque of Ball Bearing Grease
D 1480-02, Test Method for Density and Relative Density Specific Gravity of Viscous Materials by Bingham Pycnometer
D 1481-02, Test Method for Density and Relative Density Specific Gravity of Viscous Materials by Lipkin Bicapillary Pycnometer
D 1500-02, Test Method for ASTM Color of Petroleum Products ASTM Color Scale
D 1748-02, Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet
D 1837-02a, Test Method for Volatility of Liquefied Petroleum LP Gases
D 1840-02, Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
D 2782-02, Test Method for Measurement of Extreme-pressure Properties of Lubricating Fluids Timken Method
D 2887-02, Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
D 2983-02b, Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
D 3227-02a, Test Method for Thiol Mercaptan Sulfur in Gasoline, Kerosene, Aviation Turbine, and Distillate Fuels Potentiometric Method
Volume 05.02, 2004
D 3237-02, Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
D 3241-02a, Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels Jftot Procedure
D 3339-02, Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration
D 3527-02, Test Method for Life Performance of Automotive Wheel Bearing Grease
D 3828-02, Test Methods for Flash Point by Small Scale Closed Cup Tester
D 3829-02, Test Method for Predicting the Borderline Pumping Temperature of Engine Oil
D 4290-02, Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions
D 4628-02, Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry
D 4684-02a, Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
D 4739-02, Test Method for Base Number Determination by Potentiometric Titration
D 4806-02, Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-ignition Engine Fuel
D 4814-02, Specification for Automotive Spark-Ignition Engine Fuel
D 4857-02, Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards
D 4858-02, Test Method for Determination of the Tendency of Lubricants to Promote Pre Ignition in Two-Stroke-Cycle Gasoline Engines
D 4863-02, Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants
D 4927-02, Test Methods for Elemental Analysis of Lubricant and Additive Components —Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
D 4952-02, Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents Doctor Test
D 5056-02, Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
D 5293-02, Test Method for Apparent Viscosity of Engine Oils Between –5 and –35&Mac251;C Using the Cold-Cranking Simulator
Volume 05.03, 2004
D 5770-02, Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
D 5966-02, Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine
D 5969-02, Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments
D 6079-02, Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (Hfrr)
D 6224-02, Practice for
In-service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment
Volume 05.04, 2004
D 6352-02, Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700 C&Mac251; by Gas Chromatography
D 6417-02, Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography
D 6732-02, Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry
D 6751-02a, Specification for Biodiesel Fuel B100 Blend Stock for Distillate Fuels
D 6813-02a, Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps
Volume 05.04, 2004
D 6748-02a, Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones Rapid Method by Portable Spectrophotometer
Volume 05.05, 2004
D 2699-02, Test Method for Research Octane Number of Spark-Ignition Engine Fuel
D 2700-02, Test Method for Motor Octane Number of
Spark-Ignition Engine Fuel

REAPPROVAL OF STANDARD WITH EDITORIAL CHANGE
Volume 05.01, 2004
D 1322-97 (2002)e1
D 2503-92 (2002)e1
D 2780-92 (2002)e1
D 2879-97 (2002)e1

REAPPROVAL OF STANDARD
Volume 05.01, 2004
D 937-97 (2002)
D 2001-92 (2002)
D 2423-90 (2002)
D 2502-92 (2002)
D 2715-92 (2002)
D 2779-92 (2002)
D 2884-93 (2002)
D 2962-97 (2002)

REAPPROVAL OF STANDARD WITH EDITORIAL CHANGE
Volume 05.02, 2004
D 3429-93 (2002)e1
D 4170-97 (2002)e1

REAPPROVAL OF STANDARD
Volume 05.02, 2004
D 3521-86 (2002)
D 3522-86 (2002)
D 3523-92 (2002)
D 3827-92 (2002)
D 4627-92 (2002)

REAPPROVAL OF STANDARD WITH EDITORIAL CHANGE
Volume 05.03, 2004
D 5306-92 (2002)e1
D 5307-97 (2002)e1
D 5706-97 (2002)e1

WITHDRAWAL OF STANDARD
Volume 05.04, 2004
D 6623-01, Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by High Resolution Gas Chromatography

REINSTATEMENT OF STANDARD
Volume 05.01, 2004
D 1657-02, Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Thermohydrometer

D04 on Road and Paving Materials

REVISION OF STANDARD
Volume 04.03, 2003
D 243-02, Test Method for Residue of Specified Penetration
D 402-02, Test Method for Distillation of Cut-Back Asphaltic Bituminous Products
D 6752-02a, Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
w adopted as standard with revision
Volume 04.03, 2003
D 6847-02, Test Method for Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures

D05 on Coal and Coke

REVISION OF STANDARD
Volume 05.06, 2002
D 2361-02, Test Method for Chlorine in Coal
D 4239-02a, Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion Methods

D06 on Paper and Paper Products

REAPPROVAL OF STANDARD
Volume 15.09, 2003
D 548-97 (2002)
D 585-97 (2002)
D 586-97 (2002)
D 589-97 (2002)
D 644-99 (2002)
D 645/D 645M-97 (2002)
D 685-93 (2002)
D 774/D 774M-97 (2002)
D 778-97 (2002)
D 828-97 (2002)

D07 on Wood

REVISION OF STANDARD
Volume 04.10, 2003
D 370-02 (Includes change to title), Practice for Dehydration of Oil-Type Preservatives

D08 on Roofing and Waterproofing

NEW STANDARD
Volume 04.04, 2003
D 6848-02, Specification for Aluminum Pigmented Emulsified Asphalt Used as a Protective Coating for Roofing

REVISION OF STANDARD
Volume 04.04, 2003
D 3462-03, Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules
D 5147-02a, Test Methods for Sampling and Testing Modified Bituminous Sheet Material

D11 on Rubber

NEW STANDARD
Volume 09.01, 2003
D 6854-03, Test Method for Silica – N-Dibutyl Phthalate Absorption Number

REVISION OF STANDARD
Volume 09.01, 2003
D 1646-03, Test Methods for Rubber — Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
D 1993-03, Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption

EDITORIAL CHANGE
Volume 09.01, 2003
D 3853-03e1, Terminology Relating to Rubber and Rubber Latices — Abbreviations for Chemicals Used in Compounding

REAPPROVAL OF STANDARD WITH EDITORIAL CHANGE
Volume 09.01, 2003
D 413-98 (2002)e1

REAPPROVAL OF STANDARD
Volume 09.01, 2003
D 3568-98 (2002)
D 2226-93 (2002)
D 3848-98 (2002)
D 4528-88 (2002)
D 4677-87 (2002)
D 5377-93 (2002)
D 5406-93 (2002)
D 5605-94 (2002)
D 5899-98 (2002)
D 5900-98 (2002)
D 6085-97 (2002)
Volume 09.02, 2003
D 2433-93 (2002)
D 5193-93 (2002)

WITHDRAWAL OF STANDARD
Volume 09.02, 2003
D 1764-97, Specification for Rubber Latex Products for Automotive Applications

D13 on Textiles

NEW STANDARD
Volume 07.02, 2002
D 6828-02, Test Method for Stiffness of Fabric by the Blade/Slot Procedure
D 6718-02, Practice for Writing Committee D13 Standards

REVISION OF STANDARD
Volume 07.01, 2002
D 2260-02, Tables of Conversion Factors and Equivalent Yarn Numbers Measured in Various Numbering Systems
Volume 07.01, 2003
D 123-02, Terminology Relating to Textiles
Volume 07.02, 2002
D 4975-02a, Test Methods for Single-Filament Tire Bead Wire Made from Steel
D 5104-02, Test Method for Shrinkage of Textile Fibers Single-Fiber Test
D 6320-02, Test Methods for Single Filament Hose Reinforcing Wire Made from Steel
D 6477-02a (Includes change to title), Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics
Volume 07.02, 2003
D 6119-03, Practice for Creating Surface Appearance Changes in Pile Yarn Floor Covering from Foot Traffic

REAPPROVAL OF STANDARD
Volume 07.02, 2002
D 3776-96 (2002)
D 3777-97 (2002)
D 4853-97 (2002)
D 4855-97 (2002)
D 4965-96 (2002)

D18 on Soil and Rock

REVISION OF STANDARD
Volume 04.08, 2002
D 5730-02, Guide for Site Characterization for Environmental Purposes with Emphasis on Soil, Rock, the Vadose Zone and Ground Water

WITHDRAWAL OF STANDARD
Volume 04.08, 2003
D 5447-93e1, Guide for Application of a Ground-Water Flow Model to a Site-Specific Problem
Volume 04.09, 2003
D 4429-93, Test Method for CBR (California Bearing Ratio) of Soils in Place

D19 on Water

WITHDRAWAL OF STANDARD
Volume 11.01, 2003
D 4779-93, Test Method for Total, Organic, and Inorganic Carbon in High Purity Water by Ultraviolet UV or Persulfate Oxidation, or Both, and Infrared Detection

D20 on Plastics

REVISION OF STANDARD
Volume 08.01, 2003
D 1784-02, Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
D 2116-02, Specification for Fep-Fluorocarbon Molding and Extrusion Materials
Volume 08.02, 2003
D 3763-02, Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors
Volume 08.03, 2003
D 4364-02, Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight
D 4703-02, Practice for Compression Molding Thermoplastic Materials Into Test Specimens, Plaques, or Sheets
D 4969-02, Specification for Polytetrafluoroethylene PTFE Coated Glass Fabric
D 5203-02, Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer Hdpe Sources
D 6436-02, Guide for Reporting Properties for Plastics and Thermoplastic Elastomers

EDITORIAL CHANGE
Volume 08.01, 2003
D 256-02e1, Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics

REAPPROVAL OF STANDARD
Volume 08.01, 2003
D 1004-94a (2003)
Volume 08.02, 2003
D 2734-94 (2003)
Volume 08.03, 2003
D 4670-97 (2002)
D 5577-94 (2003)

REAPPROVAL OF STANDARD WITH EDITORIAL CHANGE
Volume 08.03, 2003
D 4669-98 (2002)e1
D 5948-96 (2002)e1
D 6068-96 (2002)e1

WITHDRAWAL OF STANDARD
Volume 08.01, 2003
D 671-93, Test Method for Flexural Fatigue of Plastics by Constant-Amplitude-of-Force

D22 on Sampling and Analysis of Atmospheres

NEW STANDARD
Volume 11.03, 2003
D 6831-02, Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

REVISION OF STANDARD
Volume 11.03, 2003
D 4230-02, Test Method of Measuring Humidity with Cooled-Surface Condensation Dew-Point Hygrometer
D 5952-02, Guide for Inspecting Water Systems for Legionellae and Investigating Possible Outbreaks of Legionellosis Legionnaires Disease or Pontiac Fever
E 104-02, Practice for Maintaining Constant Relative Humidity by Means of Aqueous Solutions
E 337-02, Test Method for Measuring Humidity with a Psychrometer the Measurement of Wet- and Dry-Bulb Temperatures

REAPPROVAL OF STANDARD WITH EDITORIAL CHANGE
Volume 11.03, 2003
D 5366-96 (2002)e1
D 5527-00 (2002)e1
D 5741-96 (2002)e1

REAPPROVAL OF STANDARD
Volume 11.03, 2003
D 6245-98 (2002)

D24 on Carbon Black

REVISION OF STANDARD
Volume 09.01, 2003
D 1765-03, Classification System for Carbon Blacks Used in Rubber Products
D 4821-03, Guide for Carbon Black —Validation of Test Method Precision and Bias
D 6602-03, Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both

EDITORIAL CHANGE
Volume 09.01, 2003
D 3053-99e1, Terminology Relating to Carbon Black

D26 on Halogenated Organic Solvents and Fire Extinguishing Agents

REVISION OF STANDARD
Volume 15.05, 2003
D 3844-02 (Includes change to title), Guide for Labeling Chlorinated Hydrocarbon Solvent Containers
D 4376-02, Specification for Vapor-Degreasing Grade Perchloroethylene
D 6368-02, Specification for Vapor-Degreasing Grade and General Grade

D27 on Electrical Insulating Liquids and Gases

REVISION OF STANDARD
Volume 10.03, 2003
D 3612-02, Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography

D32 on Catalysts

REAPPROVAL OF STANDARD
Volume 05.05, 2002
D 3766-86 (2002)

D33 on Protective Coating and Lining Work for Power Generation Facilities

REAPPROVAL OF STANDARD
Volume 06.02, 2003
D 4618-92 (2003)

D34 on Waste Management

NEW STANDARD
Volume 11.04, 2003
D 6842-02, Guide for Designing Cost-Effective Sampling and Measurement Plans by Use of Estimated Uncertainty and Its Components in Waste Management Decision-Making

D35 on Geosynthetics

REVISION OF STANDARD
Volume 04.09, 2002
D 4759-02, Practice for Determining the Specification Conformance of Geosynthetics